Page 2 - xi
Unless otherwise specified, all commercial cooking equip-ment manufactured by WELLS MFG. CO. is warranted against defects in materials and workmanship for a period of one year from the date of original installation or 18 months from the date of shipment from our factory, whichever comes first, and i...
Page 3 - MODEL
WARRANTY xi SPECIFICATIONS 1 FEATURES & OPERATING CONTROLS 2 PRECAUTIONS & GENERAL INFORMATION 3 AGENCY LISTING INFORMATION 3 INSTALLATION 4 OPERATION 6 Programming Instructions 7 CLEANING INSTRUCTIONS 8 PARTS & SERVICE 9 CUSTOMER SERVICE DATA 9 Thank You for purchasing this Wells Manufa...
Page 4 - FEATURES & OPERATING CONTROLS
FEATURES & OPERATING CONTROLS 2 NOTE: HDW-2 DUAL-DRAWER STANDARD WIDTH UNIT SHOWN. SINGLE-DRAWER AND NARROW WIDTH UNITS ARE SIMILAR
Page 5 - AGENCY LISTING INFORMATION
FEATURES & OPERATING CONTROLS (continued) 3 WARNING: ELECTRIC SHOCK HAZARD All servicing requiring access to non-insulated elec-trical components must be performed by a factory au-thorized technician. DO NOT open any access panel which requires the use of tools. Failure to follow this warning ca...
Page 6 - INSTALLATION; SHIPPING DAMAGE; UNPACKING & INSPECTION; Installation; SETUP; Installation Instruction Sheet
INSTALLATION NOTE: DO NOT discard the carton or other packing materials until you have inspected the appliance for hidden damage and tested it for proper operation. Refer to SHIPPING DAMAGE CLAIM PROCEDURE on the inside front cover of this manual. WARNING: RISK OF PERSONAL INJURY Installation proced...
Page 7 - ELECTRICAL
5 INSTALLATION (continued) ELECTRICAL Refer to electrical specifications on page 1. Circuit must meet or exceed the amperage and wattage requirements listed. 120 Volt units require a properly grounded NEMA 5-15R receptacle: 208/240 Volt units require a properly grounded NEMA 6-15R receptacle: WARNIN...
Page 8 - OPERATION
INSTALL WATER PAN IMOPORTANT: The water pan must be installed with care in order to prevent damage to water heating element. 1. Raise the water pan into position. Be careful not to contact heating element: a. Position drain to the front b. Hold water pan so that rear is slightly lower c. Stop pins o...
Page 9 - NORMAL OPERATION
OPERATION (continued) 7 NORMAL OPERATION Plug unit into an appropriate electrical receptacle. Add water to water pan. Proper water level is 1/2" from top. OPERATIONAL TIPS: Refill water pan as required during operation. Use filtered or treated water to minimize mineral/scale build-up. Keep drawe...
Page 10 - PROGRAM MODE; OFF; CHANGE FROM oF to oC; Press and hold SEL and START/STOP until PROG light glows.
PROGRAM MODE Press and hold MENU key, then UP ARROW key or DOWN ARROW key to select menu number. Release keys. Press and hold MENU key for 3 seconds to enter programming mode. PROGRAM indicator will flash. Press SEL key to select parameter (AIR, WATER or TIME) to be changed. Press UP ARROW key or DO...
Page 11 - RECOMMENDED TEMPERATURE SETTINGS AND HOLDING TIMES; TYPE OF FOOD
OPERATION (continued) 9 RECOMMENDED TEMPERATURE SETTINGS AND HOLDING TIMES TYPE OF FOOD TIME (HRS) TEMPERATURE ºF AIR WATER BREAD PRODUCTS 2 1/2 155 145 DAIRY & EGG PROD- UCTS 2 160 155 MEATS & POULTRY ROASTED 3 170 150 MEATS & POULTRY FRIED 2 185 135 SEAFOODS WITH SAUCE 2 1/2 160 155 SE...
Page 12 - CLEANING INSTRUCTIONS; DO NOT
CLEANING INSTRUCTIONS 10 PRECAUTIONS: Disconnect appliance from electric power. Allow unit to cool before proceeding. FREQUENCY: Minimum -Daily TOOLS: Mild Detergent Clean cloth or sponge 1. Disconnect warmer from electric power. Allow to cool before cleaning. 2. Remove product pans from drawers. Re...
Page 13 - Wells Manufacturing Co.; CUSTOMER SERVICE DATA; VOLTAGE: (check one) 120 208 240
ACCESSORY PART NO. PRODUCT PAN, all HDW-Series Warmer 22228 IMPORTANT: Use only factory authorized service parts and replacement filters. For factory authorized service, or to order factory authorized replacement parts, contact your Wells authorized service agency, or call: Wells Manufacturing Co. 2...
Page 14 - Genuine Parts; WELLS; Wells Manufacturing proudly supports CFESA; WELLS BLOOMFIELD
Genuine Parts Protect - YOU - All - Ways SERVICE TRAINING - QUALITY SERVICE SERVICE TRAINING - QUALITY SERVICE CUSTOMER SATISFACTION CUSTOMER SATISFACTION WELLS Commercial Food Equipment Service Association Wells Manufacturing proudly supports CFESA Commercial Food Equipment Service Association WELL...