Wells HW-10 - Manual
Wells HW-10 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – xi
- Page 4 – FEATURES & OPERATING CONTROLS; OFF; WELLS
- Page 5 – Refer to the
- Page 6 – FIRE HAZARD; CAUTION; UNPACKING & INSPECTION; Installation; PLUG
- Page 7 – OPERATION; WET
- Page 8 – DAILY CLEANING INSTRUCTIONS; Mild Detergent; CLEANING INSTRUCTIONS
- Page 9 – WEEKLY CLEANING INSTRUCTIONS; Weekly, or whenever lime or scale is seen; FIRST AID
- Page 10 – TROUBLE SHOOTING SUGGESTIONS; SYMPTOM
- Page 11 – MAINTENANCE INSTRUCTIONS; CARE OF STAINLESS STEEL; clean stainless steel.
- Page 12 – DO NOT
- Page 13 – VOLTAGE: (check one) 120 208 240; CUSTOMER SERVICE DATA; ACCESSORIES; LEGS, 1” Plastic Adjustable, set of 4 21109; CLEANERS
- Page 14 – Wells Manufacturing proudly supports CFESA
WELLS MANUFACTURING COMPANY
2 ERIK CIRCLE, P. O. Box 280
Verdi, NV 89439
Customer Service (775) 345-0444 Ext.502
fax: (775) 345-0569
www.wellsbloomfield.com
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE.
Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
OPERATION MANUAL
WELLS
COUNTERTOP
HW-Series
COOK ’N HOLD
WARMERS
with
THERMOSTAT
CONTROL
Includes
INSTALLATION
USE & CARE
005
p/n 305146 Rev. - M005 073102 cdw
Model HW-10
Model HW-SMP
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Unless otherwise specified, all commercial cooking equip-ment manufactured by WELLS MFG. CO. is warranted against defects in materials and workmanship for a period of one year from the date of original installation or 18 months from the date of shipment from our factory, whichever comes first, and i...
FEATURES & OPERATING CONTROLS 2 A. THERMOSTAT 1. On THERMOSTATICALLY CONTROLLED warmers, power is applied to the heating element according to the control knob position and the actual temperature at the temperature sensing thermobulb. 2. The desired temperature is controlled by rotating the TEMPE...
PRECAUTIONS AND GENERAL INFORMATION 3 WARNING: Electric Shock hazard All servicing requiring access to non-insulated electrical components must be performed by a factory authorized technician. DO NOT open any access panel which requires the use of tools. Failure to follow this warning can result in ...
