Page 7 - Operating instruction; Explanation of symbols used; General Safety Instructions; Read all the instructions.
GB 16 W 867 E Operating instruction Congratulations on purchasing your WAGNER spray guns. You have purchased a proprietary device that requires careful cleaning and care to ensure trouble-free functioning. Read the operating instructions carefully beforeusing the tool and observe the safety instruct...
Page 9 - Careful Handling and Use of Power Tools; Do not use power tools whose switch is defective.; Safety Instructions for Spray Guns; contained solvents in the basic device during operation!
GB 18 W 867 E This appliance is not intended for use by persons (including children) with g) reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their...
Page 10 - Technical Data
GB 19 W 867 E CAUTION! • Wear breathing equipment: Paint mist and solvent vapors are damaging to health. Always wear breathing equipment and only work in well ventilated rooms or using supplementary ventilating equipment. It is advisable to wear working clothing, safty glasses, ear protection and gl...
Page 11 - Coating Materials; Coating Materials Suitable for Use
GB 20 W 867 E Technical Data Sound pressure level 80 dB (A) Oscillation level < 2.5 m/s Air hose length 3.5 m Weight approx. 6.3 kg Description (Figs. 1+2) Air cap 1) Tip 2) Union nut 3) Perfect Spray spray attachment 4) Trigger guard 5) Material volume regulation 6) Gun handle 7) Air volume con...
Page 12 - them from the work area.; Preparation of the Coating Material; Sprayed material
GB 21 W 867 E Coating Materials Not Suitable for Use Materials that contain highly abrasive components, facade paint, caustic solutions and acidic coating substances. Materials with a flash point below 21°C. Preparation of the workplace (for interior wall paint) Cover all surfaces and objects that s...
Page 13 - Thinning recommendation
GB 22 W 867 E Thinning recommendation Sprayed material Interior wall paint (dispersions and latex paint) dilute by 10 % If the feed rate is too low even at maximum flow setting, dilute in steps of 5 - 10 % until 2. the feed rate meets your requirements. Start-up Before connecting to the mains supply...
Page 14 - the application and target object.; Selecting the Spray Setting; Danger of injury! Never pull the trigger guard while adjusting; Spray Technique; find the correct setting.
GB 23 W 867 E Three different spray jet settings can be chosen on the spray gun, depending on the application and target object. Selecting the Spray Setting Fig. 8 A = horizontal flat jet for horizontal surfaces Fig. 8 B = vertical flat jet for vertical surfaces Fig. 8 C = circular jet for cor...
Page 15 - Interruption of Work till 4 Hours
GB 24 W 867 E Fig. 10 A: CORRECT: Even distance to the object. Fig. 10 C: INCORRECT: Uneven distance causes uneven coating. Move the spray gun evenly cross-wise or up-and-down, depending on the spray pattern • setting. An even movement of the spray gun results in an even surface quality. • When coat...
Page 17 - Storage
GB 26 W 867 E In order to mount the gun more easily apply lubricating grease (enclosed) liberally to the O-ring at the spray attachment (Fig. 11, item 18) and to the O-ring of the plug connection of the air hose (Fig. 11, item 19). Storage Remove the hose and when storing it in the cover put in the ...
Page 18 - Accessories (not included in the delivery); Name; Environmental protection
GB 27 W 867 E The new CLICK&PAINT SYSTEM with additional spray attachments and accessoriesoff ers the richt tool for each work. Accessories (not included in the delivery) Name Order No. HVLP handle extension For easier coating of ceilings and horizontal objects. 2307 678 Container with cover 800...
Page 20 - Warning
GB 29 W 867 E Malfunction Cause Remedy Device does not function Device overheated • Unplug the power ➞ plug, let the device cool down approx. 30 minutes, do not bend the hose, check the air filter, do not cover the intake slots Poor covering capacity on the wall Spray material is too cold • Highly a...
Page 21 - years guarantee
GB 30 W 867 E 2 years guarantee The guarantee runs for two years, counting from the date of sale (sales slip). It covers and is restricted to free-of-charge rectification of faults which are demonstrably attributable to the use of faulty materials in manufacture, or assembly errors; or free- of-char...