Wagner 558054 - Manuals

Wagner 558054 – Manual in PDF format online.

Manuals:

Manual

Manual Wagner 558054

Summary

Page 2 - Attention: Danger of injury by injection!; Airless units develop extremely high spraying pressures.

GB Warning! Attention: Danger of injury by injection! Airless units develop extremely high spraying pressures. Be safety conscious! 1 2 3 Never put your fingers, hands or any other parts of the body into the spray jet! Never point the spray gun at yourself, other persons or animals.Never use the spr...

Page 3 - Contents

ProSpray 3.39 3 GB Contents Contents Page 1. Safety regulations for Airless spraying ...................................... 4 1.1 Explanation of symbols used .............................................................. 4 1.2 Electric Safety ............................................................

Page 4 - Safety regulations for Airless spraying; Explanation of symbols used; HAZARD: INjECTION INjuRy

4 ProSpray 3.39 GB Safety Regulations 1. Safety regulations for Airless spraying 1.1 Explanation of symbols used This manual contains information that must be read and understood before using the equipment. When you come to an area that has one of the following symbols, pay particular attention and ...

Page 6 - General view of application; Coating materials; Description of unit; Airless process; Materials

6 ProSpray 3.39 GB General view of application Description of unit 2. General view of application 2.1 Application 2.2 Coating materials Processible coating materials i Pay attention to the Airless quality of the coating materials to be processed. Dilutable lacquers and paints or those containing sol...

Page 8 - Technical data; Transportation in vehicle; Paint material setup

8 ProSpray 3.39 GB Description of unit 3.5 Technical data Voltage: 100-110 Volt AC, 50 Hz Max. current consumption: 15 A / 20 A Power cord: 3 x 1.5 mm 2 – 6 m or 4.6 m Acceptance capacity: 2000 Watt Max. operating pressure: 221 bar (22,1 MPa) Volume flow at 12 MPa (120 bar) with water: 5.0 l/min Max...

Page 9 - Starting operation; High-pressure hose, spray gun and separating; EasyGlide prevents increased wear and tear to the; Control Panel Indicators; Pressure Indicator; If the pressure indicator begins blinking yellow when

ProSpray 3.39 9 GB Starting operation 4. Starting operation 4.1 High-pressure hose, spray gun and separating oil 1. Screw the high-pressure hose (2) to the coating material outlet (Fig. 4, Item 1). 2. Screw the spray gun (3) with the selected tip onto the high- pressure hose. 3. Tighten the union nu...

Page 10 - Service Indicator; Connection to the mains network; The unit must be connected to an appropriately-; Cleaning preserving agent when starting-up

10 ProSpray 3.39 GB Starting operation Solid GreenWhen the pressure indicator is solid green, the sprayer is operating between 12 MPa (120 bar) and 23 MPa (230 bar). A solid green pressure indicator means: • The sprayer is at the proper pressure setting for spraying oil- based and latex house paints...

Page 12 - Spraying technique

12 ProSpray 3.39 GB Starting operation Spraying technique Security Code Screen SECURITY CODE CHANGE-2 MENU-1 The Security Code screen allows the user to set a four digit security code to prevent unauthorized use of the sprayer. If a security code has been set, the control system display will ask for...

Page 13 - Cleaning unit from outside

ProSpray 3.39 13 GB Handling the high-pressure hose Cleaning the unit (shutting down) 6. Handling the high-pressure hose The unit is equipped with a high-pressure hose specially suited for piston pumps. Danger of injury through leaking high-pressure hose. Replace any damaged high-pressure hose immed...

Page 14 - Cleaning the high-pressure filter; unplug the power plug from the outlet.; Cleaning Airless spray gun; Cleaning the inlet screen

8.2 Cleaning the high-pressure filter Clean the filter cartridge regularly.A soiled or clogged high-pressure filter can cause a poor spray pattern or a clogged tip. 1. Turn the pressure regulator knob into the black zone until it stops (no pressure). 2. Open the relief valve, valve position PRIME ( ...

Page 15 - Digital Electronic Spray Control (DESC) Error Messages; Remedy in case of faults

ProSpray 3.39 15 GB Remedy in case of faults Digital Electronic Spray Control (DESC) Error Messages The following error message screens appear whenever the Digital Electronic Spray Control (DESC) detects a problem with the sprayer. Once a problem occurs and the error message appears, the sprayer wil...

Page 16 - General servicing; Repairs at the unit; Inlet and outlet valve; Danger of crushing - do not reach with the fingers or

16 ProSpray 3.39 GB Servicing Repairs at the unit 10. Servicing 10.1 General servicing Servicing of the unit should be carried out once annually by the WAGNER service. 1. Check high-pressure hoses, device connecting line and plug for damage. 2. Check the inlet valve, outlet valve and filter for wear...

Page 19 - Selection of tip; Servicing and cleaning of Airless hard-metal tips; Tip extension

ProSpray 3.39 19 GB Appendix 12. Appendix 12.1 Selection of tip To achieve faultless and rational working, the selection of the tip is of the greatest importance. In many cases the correct tip can only be determined by means of a spraying test.Some rules for this:The spray jet must be even.If streak...

Page 20 - Airless tip table; Wagner; All of the tips in the table below are supplied

20 ProSpray 3.39 GB Appendix 12.4 Airless tip table Wagner TradeTip 3 tip up to 270 bar (27 MPa) without tip F thread (11/16 - 16 UN) for Wagner spray guns Order no. 0289391 without tip G thread (7/8 - 14 UN) for Graco/Titan spray guns Order no. 0289390 i All of the tips in the table below are suppl...

Page 22 - Suitable for the following models:

22 ProSpray 3.39 GB Appendix 12.5 Pump-Runner (Order No. 2306987)Universal accessories for cleaning, clean transportation and preservation of the pump unit. Features: • Simpler cleaning – the cleaning liquid circulates constantly through the pump making thorough cleaning of the interior • No cleanin...

Page 24 - Accessories illustration

24 ProSpray 3.39 Accessories illustration ProSpray 3.39 3 1 5 8 2 4 7 9 10 6

Page 28 - Item

28 ProSpray 3.39 Spare parts list ProSpray 3.39 1 10 9 8 7 6 2 3 12 13 14 15161718 1920 21 22 23242526 27 28 29 4 5 11 32 30 31 Fluid section Item Part No. Description 1 0558 419 Cylinder 2 0524 905 Stopping spacer 3 0524 906 Extension bushing 4 0558 570A Piston extension 5 0558 422 Extension slider...