Wagner 3.23 - Manuals

Wagner 3.23 – Manual in PDF format online.

Manuals:

Manual

Manual Wagner 3.23

Summary

Page 2 - Attention: Danger of injury by injection!; Airless units develop extremely high spraying pressures.; PE; Uncontrolled Copy

2 ProSpray 3.23 GB Warning! Never put your fingers, hands or any other parts of the body into the spray jet! Never point the spray gun at yourself, other persons or animals. Never use the spray gun without safety guard. Do not treat a spraying injury as a harmless cut. In case of injury to the skin ...

Page 3 - Contents

ProSpray 3.23 3 GB Contents Contents Page 1. Safety regulations for Airless spraying ....................... 4 1.1 Earthing instructions......................................................... 5 2. General view of application ........................................... 6 2.1 Application...............

Page 4 - Safety regulations for Airless

4 ProSpray 3.23 GB Safety Regulations 1. Safety regulations for Airless spraying This manual contains information that must be read and understood before using the equipment. When you come to an area that has one of the following symbols, pay particular attention and make certain to heed the safegua...

Page 5 - Earthing Instructions; Work or repairs at the electrical equipment:

ProSpray 3.23 5 GB Safety regulations General view of application HAZARD: EXPLOSION HAZARD DuE TO INCOMPATIBLE MATERIALS Will cause severe injury or property damage.PREVENTION : • Do not use materials containing bleach or chlorine. • Do not use halogenated hydrocarbon solvents such as methylene chlo...

Page 6 - General view of application; Application; Description of unit; Airless process; Materials

6 ProSpray 3.23 GB General view of application Description of unit 2. General view of application 2.1 Application 2.2 Coating materials Processible coating materials i Pay attention to the Airless quality of the coating materials to be processed. Dilutable lacquers and paints or those containing sol...

Page 8 - Technical data; Volume flow at 12 MPa; Transportation in vehicle; Starting operation; separating oil; EasyGlide prevents increased wear and tear to

8 ProSpray 3.23 GB Description of unit Starting operation 3.5 Technical data Voltage: 220~240 Volt , 50/60 Hz Max. current consumption: 5.5 A Power cord: 3 x 1.5 mm 2 – 6 m Acceptance capacity: 1035 Watt Max. operating pressure: 221 bar (22,1 MPa) Volume flow at 12 MPa (120 bar) with water: 2.3 l/mi...

Page 9 - Control Panel Indicators; Pressure Indicator; Connection to the mains network

ProSpray 3.23 9 GB Starting operation 6 4.2 Control Panel Indicators The following is a description of the control panel indicators. Pressure Indicator Service Indicator Pressure Indicator The pressure indicator shows the current operating pressure of the sprayer. It has three different indications:...

Page 10 - Spraying technique

10 ProSpray 3.23 GB Starting operation Spraying technique 4.5 Cleaning preserving agent when starting- up of operation initially 1. Immerse the suction tube (Fig. 6, Item 1) and return hose (2) into a container with a suitable cleaning agent. 2. Turn the pressure control knob counterclockwise (3) to...

Page 11 - Cleaning unit from outside

ProSpray 3.23 11 GB Handling the high-pressure hose Cleaning the unit (shutting down) 6. Handling the high-pressure hose Avoid sharp bending or kinking of the high-pressure hose. The smallest bending radius amounts to about 20 cm. Do not drive over the high-pressure hose. Protect against sharp objec...

Page 12 - Suction filter; A clean suction filter always guarantees; Cleaning the high-pressure filter; unplug the power plug from the outlet.; Cleaning Airless spray gun; Intake filter in Airless spray gun

12 ProSpray 3.23 GB Cleaning the unit (shutting down) 8.2 Suction filter i A clean suction filter always guarantees maximum feed quantity, constant spraying pressure and problem-free functioning of the unit. 1. Screw off the filter (Fig. 7) from suction pipe. 2. Clean or replace the filter. Carry ou...

Page 13 - Type of malfunction; Remedy in case of faults

ProSpray 3.23 13 GB Remedy in case of faults Type of malfunction A. Unit does not start B. Unit does not draw in material C. Unit draws in material, but the pressure does not build up D. Coating material exits at the top of the fluid section E. Increased pulsation at the spray gun F. Poor spray patt...

Page 14 - General servicing; Repairs at the unit; Before all repair work: unplug the power plug; Inlet and outlet valve; Danger of crushing - do not reach with the

14 ProSpray 3.23 GB Servicing Repairs at the unit 10. Servicing 10.1 General servicing Servicing of the unit should be carried out once annually by the WAGNER service. 1. Check high-pressure hoses, device connecting line and plug for damage. 2. Check the inlet valve, outlet valve and filter for wear...

Page 18 - Airless tip table; Spray gun filter “RED”

18 ProSpray 3.23 GB Appendix Application Tip Spray Bore Spraying marking angle inch / mm width mm 1) Order no. Natural paints 407 40° 0.007 / 0.18 160 0552 407 Clear paints 507 50° 0.007 / 0.18 190 ––––––– Oils 209 20° 0.009 / 0.23 145 0552 209 309 30° 0.009 / 0.23 160 0552 309 409 40° 0.009 / 0.23 ...

Page 19 - Description

ProSpray 3.23 19 GB Appendix 12.5 TempSpray The paint material is heated to the required temperature uniformly by an electric heating element, which is located inside the hose (regulated from 20°C to 60°C). Advantages: • Constant paint temperature even at low outside temperatures • Considerably bett...

Page 20 - Suitable for the following models:; Example of use

20 ProSpray 3.23 GB Appendix 12.6 Pump-Runner (Order No. 2306987) Universal accessories for cleaning, clean transportation and preservation of the pump unit. Features: • Simpler cleaning – the cleaning liquid circulates constantly through the pump making thorough cleaning of the interior • No cleani...

Page 22 - Accessories illustration

22 ProSpray 3.23 Accessories illustration ProSpray 3.23 3 1 5 7 9 2 4 6 8 Uncontrolled Copy

Page 28 - Item

28 ProSpray 3.23 Spare parts list ProSpray 3.23 9 10 8 11 12 1 2 3 5 6 7 4 13 17 14 15 16 13 Drive Assembly Item Part No. Description 1 0524 637A Housing assembly 2 0509 121 2nd stage gear 3 0558 300A Motor assembly 4 0508 559 Screw (4) 5 0290 226 Baffle assembly 6 0509 218 Screw (2) 7 0558 533 Elec...

Page 30 - Suction system

30 ProSpray 3.23 1 3 2 4 Item Part No. Description 1 0551 706 Siphon hose 2 9850 638 Tie wrap (2) 3 0551 707 Retun tube 4 0279 459 Clip 0551 705 Siphon tube assembly (includes items 1-4) Suction system Spare parts list ProSpray 3.23 Uncontrolled Copy

Page 32 - Declaration of conformity

32 ProSpray 3.23 Note on disposal: In observance of the European Directive 2002/96/ EC on waste electrical and electronic equipment and implementation in accordance with national law, this product is not to be disposed of together with household waste material but must be recycled in an environmenta...