Page 2 - IMPORTANT SAFETY INSTRUCTIONS
第 1 页 共 11 页 IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, explosion, electric shock, or injury when using your ice maker,follow these important safety instructions:1. Before using check that the voltage power corresponds to the one shown on theappliance nameplate.2. Do not remove any sa...
Page 4 - SAVE THESE INSTRUCTIONS; KNOW YOUR ICE MAKER; (Product may be subject to change without prior notice); CONTROL PANEL
第 3 页 共 11 页 SAVE THESE INSTRUCTIONS HOUSEHOLD USE ONLY KNOW YOUR ICE MAKER (Product may be subject to change without prior notice) CONTROL PANEL
Page 5 - Function; BEFORE FIRST USE
第 4 页 共 11 页 Key (with indicator) Function ON/OFF Start or stop the appliance ICE Standby mode: “ICE” indicator blinks;Working condition: “ICE” indicator lightssolidly. ICE FULL “ICE FULL” indicator lights up when theice basket is full. ADD WATER “ADD WATER” indicator lights up whenthe water reservo...
Page 6 - during; “CLEANING AND; USING YOUR ICE MAKER
第 5 页 共 11 页 4) Grasp the center of handle and lift it upwards (see Fig.3), check and make sure thatthere shall be no abnormal condition can be found. 3. Please ensure the ice maker is level and on a stable table or platform to avoidmalfunction.4. The incline angle of the ice maker cabinet should no...
Page 7 - NOTE; : Do not fill above the MAX water level mark.
第 6 页 共 11 页 NOTE : Please make the ice maker be rested for 30 minutes before plug if it has been moved.3. Open the top lid and remove the ice basket.4. Fill the water reservoir with drinking water. NOTE : Do not fill above the MAX water level mark. 5. Replace the ice basket and close the top lid.6....
Page 8 - maker is not used for a long time.; CLEANING AND MAINTENANCE; SELECT
第 7 页 共 11 页 maker is not used for a long time. CLEANING AND MAINTENANCE To keep your ice tasting fresh and your ice maker looking great, we recommend cleaningyour ice maker once per week.1. Stop the ice-making cycle by pressing the “ON/OFF” key, unplug the ice maker fromthe wall outlet and allow it...
Page 9 - TROUBLESHOOTING; Problem
第 8 页 共 11 页 ( Fig.4 ) ( Fig.5 ) ( Fig.6 ) TROUBLESHOOTING Problem Possible causes Solution “ADD WATER”indicator turns on 1.Low water level or lack ofwater2.The water screen at the bottomof water reservoir is blocked.3.Pump malfunction. 1.Stop making ice, refillwater and then press“ON/OFF” key to re...
Page 11 - TECHNICAL PARAMETERS; Unit size
第 10 页 共 11 页 3.The ambient temperature is toohigh. 2. Fill the water reservoirwith water ranges between8℃ and 28℃.3. Operate the ice maker ata environment with anambient temperaturebetween 10℃ and 32℃. TECHNICAL PARAMETERS Model: IM2102ADT-UL Applicable climate: ST/SN/N/T Class: I Power source: 120...