Verizon C-CV24-3 CU - Manuals

Page 2 - SAFETY PRECAUTIONS; • After reading, keep this manual handy for future reference.; Safety Symbol and Message Conventions; may result in fire or electric shock.; WARNING; outlet in order to avoid electric shock or fire.; CAUTION

2 1. SAFETY PRECAUTIONS • Before installation or use, be sure to carefully read all the instructions in this section in order to ensure long, trouble-free operation. • Be sure to follow all the precautionary instructions in this section, which contain important warnings regarding safety. • After rea...

Page 3 - Note

3 2. GENERAL DESCRIPTION The C-CV24-2 and C-CV24-3 Color Dome Camera is an indoor-use camera and is equipped with a high-resolution camera and lens. It is designed to operate on 24 V AC or 12 V DC, which are supplied by anexternal power supply unit. Since its vari-focal, auto-iris lens is built insi...

Page 4 - [Side view of the camera with a dome cover]

IRIS F.ADJ BLC 1/60 1/100 OFF ON 1 2 3 4 5 6 7 8 9 10 11 12 4 (1) Power input cable (24 V AC or 12 V DC) (2) Video output cable (3) Monitor output terminal (RCA pin jack) (4) Mode setting switch (5) Iris control (6) Vari-focal lens (7) Zoom ring (8) Zoom ring fixing screw (9) Focus ring (10) Focus r...

Page 6 - mark Camera head assembly

6 Camera direction mark Rotate the inner cover to the "R" range, and align the mark with scale indicator "3." Inner cover mark Mounting screws Note Ensure that the mounting screws are set securelyin their corresponding camera mounting holes. Be sure to use the optional ceiling bracke...

Page 7 - Inner Cover Adjustment; Hold the dome cover so that the

7 Inner Cover Adjustment Note: Take care not to touch the dome cover window (transparent section) during adjustment. 1. Hold the dome cover so that the mark is positioned as shown in the figure below. 2. Rotate the dome inner cover with the thumbs of both hands to align the scale.3. Attach the dome ...

Page 8 - mark and then rotating the cover clockwise.; About the alignment marks; If the Video output is not terminated at 75

8 mark Alignment mark Alignment mark Dome cover turn stop screw • Ceiling mounting : Align the front alignment mark with the camera’s mark.• Wall mounting : Align the rear alignment mark with the camera’s mark. Dome cover external view (as supplied from the factory) Camera window Rear alignment mark...

Page 9 - Switch on the camera power after completing camera connections.

9 Vertical rotation ± 70º Picture tilting ± 90º Horizontal rotation ± 65º Zoom ring fixing screw Focus ring fixing screw Vari-focal lens Zoom ring Focus ring 7. ADJUSTMENT 1. Switch on the camera power after completing camera connections. Power is supplied to the camera. 2. Normally, set the Shutter...

Page 10 - ABOUT THE MODE SETTING SWITCH; Adjustment switch is set to ON.

10 Mode Setting Switch(Factory-preset setting) OFF ON Adjustment switch Backlight Compensation switch Shutter Speed switch IRIS F.ADJ BLC 1/60 1/100 OFF ON 1/60 1/100 OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON 8. ABOUT THE MODE SETTING SWITCH Set the Mode Setting switch for the best possible picture ...