URC KP-4000 - Manuals - manualsarea.com

KP-4000 Installation Manual ©2010 Universal Remote Control, Inc. The information in this manual is copyright protected. No part of this man-ual may be copied or reproduced in any form without prior written consentfrom Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE ...

Page 4 - Introduction

Page 1 KP-4000 N ETWORK K EYPAD Introduction The KP-4000 is a Network Keypad with the ability to control audiovideo components, energy management devices, multizone matrixes,PCs, iPods, and whole house URC Lighting. MAC addressing enablesthe use of multiple KP-4000’s and multiple MRX-1’s to control ...

Page 5 - Features and Benefits

Page 2 KP-4000 N ETWORK K EYPAD Features and Benefits 2-Way IP and RS-232 Home Theater AVRS Via the unique URC 2-Way database, installers can drag and drop2-Way pre-programmed modules into any KP-4000 for multi-zonereceivers with either IP or via the MRX-1, RS-232 control. 2-Way IP Control of Media ...

Page 6 - Network Requirements and Power Options; Connect the CAT 5 cable (RJ45) to the LAN connection on the

Network Requirements and Power Options The KP-4000 must be connected to the same Local Area Network asthe MRX-1 to function correctly. Additionally, in order for yourclient to enjoy internet features such as RSS feeds, the Local AreaNetwork must be connected to the Internet. You have three options t...

Page 7 - Option 2: PoE Injector; Splice a 12V 1Amp Power Adapter (not included) and connect to

KP-4000 N ETWORK K EYPAD Page 4 Option 2: PoE Injector KP-4000 KP-4000 Router PoE Injector(not included) Power Supply(not included) 1. Splice a 12V 1Amp Power Adapter (not included) and connect to the rear Power input. 2. For network connections to IP devices, MRX-1 and the internet, connect a CAT 5...

Page 8 - Installation Notes; MAC Address Labels/Reset Button; Reset Button: Press this button to reset the keypad.; Connections; Reset Button

Page 5 KP-4000 N ETWORK K EYPAD 12V Power (not required in a PoEinstallation) LAN PoE RJ-45 (Connects KP-4000 to Network) IR OUT/RFTX-1 (only required if URC RF Lighting, RF Base or a wired emitter is needed) Installation Notes MAC Address Labels/Reset Button The KP-4000 has a magnetic cover, simply...

Page 9 - IR Emitter Connection

IR OUT/RFTX-1 This 3 Conductor removable connector can be used for either anRFTX-1 RF transmitter or for a URC IR emitter. RFTX-1 Connections In installations with URC RF lighting or a standard RF base station,you will need to add an RFTX-1 RF Transmitter to the KP-4000.Range can wildly vary, depend...

Page 11 - The KP-4000 installs in a standard two gang box. If in a retrofit

Page 8 KP-4000 N ETWORK K EYPAD 1. The KP-4000 installs in a standard two gang box. If in a retrofit installation, cut in and install a standard two gang p-ring or retrofit box (not included) into the wall. 2. Make connections for IR Out/RFTX-1, LAN, or Power Supply. For connections, refer to page 5...

Page 12 - CCP MAC Address Discovery

Page 9 CCP MAC Address Discovery 1.Once the KP-4000 has been connected to the network, notate the MAC address located on the KP-4000 under the magnetic coverplate. 2. Open the Complete Control Program editor. 3. Select the Program tab then press Configure Home. 4. Add a KP-4000 Network Keypad from t...

Page 13 - Displaying the Settings Screen

Page 10 KP-4000 N ETWORK K EYPAD Displaying the Settings Screen You can adjust the settings of the KP-4000 whenever you like by pressingand holding both the MAIN and MUTEbuttons for five seconds. When you do,the screen will change to the SETTINGSscreen. If you do not press any button onthe SETTINGS ...

Page 14 - Sound

Page 11 KP-4000 N ETWORK K EYPAD Sound Your KP-4000 may have been pro-grammed to make sounds. This is option-al, and some professional installers may prefer to keep it silent.However, you can adjust the volume toany level you like by touching and dragging the volume control here. Adjusting Brightnes...

Page 16 - Frequently Asked Questions

Page 13 KP-4000 N ETWORK K EYPAD Frequently Asked Questions I am unable to control my URC Lighting Dimmer/Switch with theKP-4000. Now what?Make sure the RF switch on the RFTX-1 is set to the correct fre-quency for the URC Dimmer or Switch. URC Lighting ModelsMRFA is 418MHz and MRFB is 433MHz. How do...

Page 17 - USA Limited Warranty Statement

Page 14 USA Limited Warranty Statement Your Universal Remote Control, when delivered to you in newcondition, is warranted against defects in materials or work-manship as follows: UNIVERSAL REMOTE CONTROL, INC.warrants this product against defects in material or workman-ship for a period of one (1) y...

Page 18 - FCC Caution

Page 15 Federal Communication Commission InterferenceStatement This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmful interference in a residential...