URC MRF-300/RFX150 - Manual
URC MRF-300/RFX150 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – Introduction
- Page 5 – Features and Benefits; Interference Rejection and Adjustable RF Range via RFX-150; Variable IR Output Matches Rear Panel IR Inputs; Up To Fifteen Equipment Locations With Identical Components; Parts Guide
- Page 6 – Installation
- Page 7 – Daisy Chain Multiple MRF-300’s to One RFX-150 RF Sensor
- Page 8 – Step 5 - Power on the entire Audio/Video System
- Page 9 – Step 7 - Test RF Address
- Page 10 – Front Blaster Overload; Step 1 - Open the RF Setup Window
- Page 11 – Controlling An Array of Identical Components or Zones; Identical Components/Zones - Step by Step via PC; Step 2 - Program One Device With IR commands.
- Page 12 – Step 3 - Copy The Programmed Device; Step 6 - Adjust the Signal For Each of the Identical Devices
- Page 13 – Step 7 - Adjust the Flashers For Each of the Identical Devices
- Page 14 – Programming For Multiple Equipment Locations; Step 1 - Open the RF Setup Window in MX Editor
- Page 15 – Frequently Asked Questions; How can I increase the range of the remote control?; Warranty; Specifications
- Page 16 – The Complete Control; Remote Control System; TM
MRF-300/RFX150
INSTALLATION
MANUAL
Multi-Zone RF Base Station for the MX-3000, the Aurora ,
the Aeros , the Omega and the Osiris remote controls.
TM
TM
TM
TM
MRF-300 Manual.qxd 1/14/2005 12:40 PM Page 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 1 MRF-300 B ASE S TATION Introduction The MRF-300 base station is an “addressable” base station. It is only compati-ble with Universal Remote Control’s line of Custom Programmed Remoteswith RF Addressing such as the MX-3000, the MX-950 Aurora, the MX-850 Aeros, the MX-800, MX-650 Omega and the ...
Page 2 MRF-300 B ASE S TATION Features and Benefits Interference Rejection and Adjustable RF Range via RFX-150 The MRF-300 receives RF (radio frequency) signals via the RFX-150 RF Sensor. The RFX-150 displays RF interference via a bright RED LED, which flickers when interference is present. Simply r...
Page 3 MRF-300 B ASE S TATION Installation Step 1 - Set the RF ID # rotary switch on the bottom of the MRF-300 to a VALID ID# (any address other than ID# 0). If you leave it set to ID# 0, the MRF-300operates with some restrictions: a. Accepts RF signals from any 418MH Z remote control regardless of ...
