Tyco 0-1591046-X - Manuals - manualsarea.com

Page 2 - Features

16 Port Ethernet Switch With Optional Fiber Port Tyco Electronics Page 2 Features 16 x Auto-sensing 10/100Base-T RJ-45 Ethernet ports 1 x Option slot for 100Mbit/s fiber uplink module thatoperates over distances of up to 2Km (multi-mode) or15 Km (single-mode) fiber 1 x Additional 10/100Mbit/s RJ-45 ...

Page 3 - Front Panel; Ports; Rear Panel

16 Port Ethernet Switch With Optional Fiber Port Tyco Electronics Page 3 Front Panel The front panel of the switch has 16 x RJ-45 Shielded/UnshieldedEthernet Ports, an optional fiber Ethernet 100Base-FX uplink port,a console management port and an array of LED indicators. Figure 1 – Switch with opti...

Page 4 - Installation; Copper and Fiber Cabling Guidelines

16 Port Ethernet Switch With Optional Fiber Port Tyco Electronics Page 4 Installation Copper and Fiber Cabling Guidelines 1. The RJ-45 ports can be connected to unshielded twisted pair (UTP) or shielded twisted pair (STP) cabling systems compliantwith the IEEE 802.3u 100Base TX standard for Category...

Page 5 - Completing The Installation

16 Port Ethernet Switch With Optional Fiber Port Tyco Electronics Page 5 Completing The Installation When the switch has been installed as specified above, then theunit can be configured as detailed below:- 1. Apply AC power to the switch. The green Power LED on the front panel should light. 2. Conn...

Page 6 - LED Indicators; See optional fiber module manual or the web site for details.

16 Port Ethernet Switch With Optional Fiber Port Tyco Electronics Page 6 LED Indicators The diagnostic LED indicators located on the front panel of theswitch provide real-time information about switch status. Thefollowing table describes the LED status and meaning. LED Color Function Power Green Pow...

Page 7 - Trouble Shooting; Power

16 Port Ethernet Switch With Optional Fiber Port Tyco Electronics Page 7 Trouble Shooting Power 1. Verify that the AC power is present and that the external fusing is correct and compliant with national requirements. The greenPower LED should be lit to indicate that the switch is poweredcorrectly. D...

Page 8 - Accessory Product Part Numbers; Product; Module with SC multimode connectors; Optional Fiber Uplink Port Specifications

16 Port Ethernet Switch With Optional Fiber Port Tyco Electronics Page 8 Accessory Product Part Numbers The following plug-in fiber modules are available as accessoryproducts for this switch:- Product Part Number Module with SC multimode connectors 0-1591050-0 Module with ST multimode connectors 0-1...

Page 9 - Product Specification; FCC Class A, CE Mark

16 Port Ethernet Switch With Optional Fiber Port Tyco Electronics Page 9 Product Specification Standards Compliance IEEE 802.3 10Base-T EthernetIEEE 802.3u 100 BASE-TX Fast EthernetIEEE 802.3u 100 Base-FX Fast EthernetANSI/IEEE standard 802.3 N-wayAuto-Negotiation Max Forwarding Rate 14,880 pps Ethe...