Tyco 0-1591046-X - Manual
Tyco 0-1591046-X – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Features
- Page 3 – Front Panel; Ports; Rear Panel
- Page 4 – Installation; Copper and Fiber Cabling Guidelines
- Page 5 – Completing The Installation
- Page 6 – LED Indicators; See optional fiber module manual or the web site for details.
- Page 7 – Trouble Shooting; Power
- Page 8 – Accessory Product Part Numbers; Product; Module with SC multimode connectors; Optional Fiber Uplink Port Specifications
- Page 9 – Product Specification; FCC Class A, CE Mark
Product Part No. 0-1591046-x
(EMEA) PL0334 Issue 1.2
16 Port 10/100Mbit/s
Ethernet Switch with Optional
Fiber Uplink Port
-
Product User Guide
Introduction
This Tyco Electronics auto-negotiating Fast Ethernet workgroup
switch with optional fiber uplink enables clusters of up to 16 users
to have high speed, low latency LAN connections to the corporate
network.
Local management functions such as control of port speed, duplex
mode, port trunking and VLAN membership are supported.
The optional fiber uplink module enables the switch to be
connected using a fiber link to servers, routers and other devices
over distances of up to 2km for multimode or 15km for singlemode.
Package Contents
Unpack the contents and verify them against the items below:-
1. 16 Port Ethernet Switch with fiber uplink option port
2. AC Power cord
3. Four rubber feet
4. Rack mounting kit (2 x brackets and 4 x screws)
5. RS-232 cable
If any item is damaged or missing, please contact your dealer.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
16 Port Ethernet Switch With Optional Fiber Port Tyco Electronics Page 2 Features 16 x Auto-sensing 10/100Base-T RJ-45 Ethernet ports 1 x Option slot for 100Mbit/s fiber uplink module thatoperates over distances of up to 2Km (multi-mode) or15 Km (single-mode) fiber 1 x Additional 10/100Mbit/s RJ-45 ...
16 Port Ethernet Switch With Optional Fiber Port Tyco Electronics Page 3 Front Panel The front panel of the switch has 16 x RJ-45 Shielded/UnshieldedEthernet Ports, an optional fiber Ethernet 100Base-FX uplink port,a console management port and an array of LED indicators. Figure 1 – Switch with opti...
16 Port Ethernet Switch With Optional Fiber Port Tyco Electronics Page 4 Installation Copper and Fiber Cabling Guidelines 1. The RJ-45 ports can be connected to unshielded twisted pair (UTP) or shielded twisted pair (STP) cabling systems compliantwith the IEEE 802.3u 100Base TX standard for Category...
