Tyco 1229L - Manual

Appendix C Technical Specifications 4 3 Table of Contents Display Modes .......................................................... 43 Touchmonitor Specifications ...................................... 44 AccuTouch Touchscreen Specifications ............. 45 IntelliTouch Touchscreen Specifications .....

1-1 C H A P T E R 1 I NTRODUCTION Product Description The 1229L is a retail terminal designed to present information to the operator and the customer. The 1229L is available in serial and USB versions. The 1229L functionally consists of a 12.1” LCD main display with a touchscreen, an optional vacuum...

1-2 Elo Touchmonitor User Guide The credit card reader reads all three stripes on a standard credit card or drivers license. The credit card is read by sliding the credit card, stripe side toward the display through the credit card reader forward or backward. There is a serial credit card reader and...

1-3 Video Interface Connector The video interface connector is a High density 15 pin type HD-15. Indicator Lamps The LCD display shall provide an indicator lamps to give the status of the Power Management System Audio Jack Provides for audio input signal to the stereo speakers mounted in the 1229L. ...

1-4 Elo Touchmonitor User Guide Specifications Sensor SecuGen FOR Image Capture Speed 600ms / frame Image Transfer Speed 500Byte / ms Pixel Resolution 356 x 292 USB Signaling Type Full Speed Type Theory of Operation The USB host initiates communication with the FDU01 using operation commands (Sensor...

2-7 C H A P T E R 2 I NSTALLATION AND SETUP This chapter discusses how to install your LCD touchmonitor and how to install Elo TouchSystems driver software. Unpacking Your Touchmonitor Check that the following items are present and in good condition: Touchmonitor Brick power supply VGA cable OR Seri...

2-8 Elo Touchmonitor User Guide Product Overview Main Unit Rear View

2-10 Elo Touchmonitor User Guide Kensington™ Lock The Kensington™ lock is a security device that prevents theft. To find out more about this security device, go to http://www.kensington.com.

2-11 Serial Interface Connection Your touchmonitor comes with one of the following touchscreen connector cables: Serial (RS- 232) cable or USB cable. (For Windows 98, 2000, Me and XP systems only.) To set up the display, please refer to the following figures and procedures: Remove the Back Cover The...

2-13 Serial Connection Option The following illustrations guide you step by step in connecting your touchmonitor using a serial cable connection. • Connect one end of the video cable to the rear side of computer and the other to the LCD monitor. Tighten by turning the two thumb screws clockwise to e...

2-14 Elo Touchmonitor User Guide • Connect one end of the brick power supply to the monitor and the other end to the connector of the power cable. • Connect the power cable to the power port in the monitor. • After connecting the power cable, secure the cable under the cable

2-18 Elo Touchmonitor User Guide Connect one end of the customer display cable to the computer and the other end to the monitor. Secure the cable under the cable management clip. • Press the power button on front panel to turn the monitor power on.

2-19 USB Interface Connection The following illustrations guide you step by step in connecting your touchmonitor using a USB cable connection. • Connect one end of the video cable to the rear side of computer and the other to the LCD monitor. Tighten by turning the two thumb screws clockwise to ensu...

2-23 Replace the Back Cover • When you have attached all the cables to the monitor, gently bring all the cables toward the stand so they fit under the cover lip. • Snap the back cover in place over the connections. back cover lip cables

2-24 Elo Touchmonitor User Guide Optimizing the LCD Display To ensure the LCD display works well with your computer, configure the display mode of your graphic card to make it less than or equal to 800 x 600 resolution, and make sure the timing of the display mode is compatible with the LCD display....

2-25 Magnetic Stripe Reader No drivers are needed. Testing the Serial Version: 1 Insure the MSR serial is connected. (Make a note of the serial port, COM1, COM2, etc. it is connected to.) 2 Launch HyperTerminal 3 Go to file>new connection and type “MSR” then select OK. 4 In the Connect to Menu se...

2-26 Elo Touchmonitor User Guide Rear Facing Customer Display Serial Customer Display The serial customer displays do not need drivers. To get an image on the display: 1 Plug the DB-9 connector into serial port COM1 of computer. 2 Plug the RJ-45 cable into display. 3 In windows click on Start > R...

2-27 To test the drivers: 1 In windows click on Start > Run 2 Enter “cmd” > OK 3 Type “ECHO ELO>\.\LCLD9\” > Enter The display will show ELO. Installing the Touch Driver Software Elo TouchSystems provides driver software that allows your touchmonitor to work with your computer. Drivers a...

2-28 Elo Touchmonitor User Guide Installing the Serial Touch Driver Installing the Serial Touch Driver for Windows XP, Windows 2000, Me, 95/98 and NT 4.0 NOTE: For Windows 2000 and NT 4.0 you must have administrator access rights to install the driver. 1 Insert the Elo CD-ROM in your computer’s CD-R...

2-29 Installing the Serial Touch Driver for MS-DOS and Windows 3.1 You must have a DOS mouse driver (MOUSE.COM) installed for your mouse if you wish to con- tinue using your mouse along with your touchmonitor in DOS. To install Windows 3.x and MS-DOS from Windows 95/98, follow the directions below: ...

2-30 Elo Touchmonitor User Guide Installing the USB Touch Driver Installing the USB Touch Driver for Windows XP, Windows 2000, Me and 98 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. If Windows XP, Windows 2000,Windows 98, or Windows Me starts the Add New Hardware Wizard: 2 Choose Next. S...

3-31 C H A P T E R 3 O PERATION About Touchmonitor Adjustments Your touchmonitor will unlikely require adjustment. Variations in video output and application may require adjustments to your touchmonitor to optimize the quality of the display. For best performance, your touchmonitor should be operati...

3-32 Elo Touchmonitor User Guide Control Function 1 Power Switch Turns the display system power on or off. 2 Select Displays the OSD menus on the screen and used to select (“Up” and “Down” direction) the OSD control options on the screen. 3 (1) Adjusts the decreasing value of the selected OSD contro...

3-33 Controls and Adjustment OSD Lock/Unlock You are able to lock and unlock the OSD feature. The monitor is shipped in the unlocked position. To lock the OSD: 1 Press the Menu button and button simultaneously for 2 seconds. A window will appear dis playing “OSD Unlock”. Continue to hold the buttons...

3-34 Elo Touchmonitor User Guide OSD Control Options Controls the picture contrast. Controls the picture brightness. Controls the vertical position. Controls the horizontal position. Recalls factory settings of the image parameters. Using these icons, you can select one of the preset color temperatu...

3-35 Controls the vertical fine adjustment. Controls the horizontal fine adjustment. Adjusts the horizontal position of the OSD menu. Adjusts the vertical position of the OSD menu. Determines how long (in seconds) the OSD menu waits before closing automatically after no action has been performed. Au...

3-36 Elo Touchmonitor User Guide Display Angle For viewing clarity, you can tilt the LCD forward (up to -5 degrees) or backward (up to 60 degrees.) CAUTION In order to protect the LCD, be sure to hold the base when adjusting the LCD, and take care not to touch the screen.

4-37 C H A P T E R 4 T ROUBLE SHOOTING If you are experiencing trouble with your touchmonitor, refer to the following table. If the problem persists, please contact your local dealer or our service center. Elo Technical Support numbers are listed on the last page of this manual. Solutions to Common ...

A-39 A P P E N D I X A N ATIVE R ESOLUTION The native resolution of a monitor is the resolution level at which the LCD panel is designed to perform best. For the Elo LCD touchmonitor, the native resolution is 800 x 600 for the 12.1 inch size. In almost all cases, screen images look best when viewed ...

B-41 A P P E N D I X B T OUCHMONITOR S AFETY This manual contains information that is important for the proper setup and maintenance of your touchmonitor. Before setting up and powering on your new touchmonitor, read through this manual, especially Chapter 2 (Installation), and Chapter 3 (Operation)...

B-42 Elo Touchmonitor User Guide Care and Handling of Your Touchmonitor The following tips will help keep your Elo Entuitive touchmonitor functioning at the optimal level. • To avoid risk of electric shock, do not disassemble the brick supply or display unit cabinet. The unit is not user serviceable...

C-43 A P P E N D I X C T ECHNICAL S PECIFICATIONS Display Modes Your Elo Entuitive touchmonitor is compatible with the following standard video modes: Item Resolution Type H. Scan(KHz) V. Scan(Hz) Pol. 1 640X350 VGA 31.469 70.087 + / - 2 720X400 VGA 31.469 70.087 - / + 3 640X480 VGA 31.469 59.940 - ...

C-44 Elo Touchmonitor User Guide Touchmonitor Specifications Model ET1229L LCD Display 12.1” TFT Active Matrix Panel Display Size 246(H) x 184.5(V) mm Pixel Pitch 0.3075(H) x 0.3075(V) mm Display Mode VGA 640 x 350 (70 Hz) VGA 720 x 400 (70Hz) VGA 640 x 480 (60 / 72 / 75Hz) SVGA 800 x 600 (56 / 60 /...

C-45 AccuTouch Touchscreen Specifications Mechanical Construction Top: Polyester with outside hard-surface coating with clear or antiglare finish. Inside: Transparent conductive coating. Bottom: Glass substrate with uniform resistive coating. Top and bottom layers separated by Elo-patented separator...

C-46 Elo Touchmonitor User Guide IntelliTouch Touchscreen Specifications Mechanical Positional Accuracy Standard deviation of error is less than 0.080 in. (2.03 mm). Equates to less than ±1%. Touchpoint Density More than 100,000 touchpoints/in2 (15,500 touchpoints/cm2). Touch Activation Force Typica...

C-47 Infrared Touchscreen Specifications Mechanical Input Method Input Method Finger or gloved hand activation Electrical Positional Accuracy Typical centroid accuracy: 2 mm with 1 mm STD error Resolution Touchpoint density is based on controller resolution of 4096 x 4096 Touch Activation Force No m...

44 Elo Touchmonitor User Guide R EGULATORY I NFORMATION I. Electrical Safety Information: A) Compliance is required with respect to the voltage, frequency, and current requirements indi cated on the manufacturer’s label. Connection to a different power source than those specified herein will likely ...

48 Elo Touchmonitor User Guide W ARRANTY Except as otherwise stated herein or in an order acknowledgment delivered to Buyer, Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship. With the exception of the negotiated warranty periods; the warranty for the to...

I N D E X - 5 0 Environmental, IR, 47 Expected Life Performance, AccuTouch, 45 Expected Life Performance, IntelliTouch, 46 External 12 VDC Power Supply, 5 F Finger Print Reader, 24 Fingerprint Reader, 3 G General Power Saving Mode, 35 Gloss, AccuTouch, 45 Gloss, IntelliTouch, 46 H Haze, AccuTouch, 4...

Check out Elo’s Web site! www.elotouch.com Get the latest... • Product information • Specifications • News on upcoming events • Press release • Software drivers • Touchmonitor Newsletter Getting in Touch with Elo To find out more about Elo’s extensive range of touch solutions, visit our Web site at ...