TRUE TCGD-50 - Manuals - manualsarea.com

Page 3 - SAFETY INFORMATION; • This display case must be properly installed; SAFETY PRECAUTIONS; How to Maintain Your Unit; maintained, will give you many years of trouble-free service.

............ www.truemfg.com ............ True Food Service Equipment, Inc. 1 1 SAFETY INFORMATION • This display case must be properly installed and located in accordance with the Installation Instructions before it is used. • Do not allow children to climb, stand or hang on the shelves in the disp...

Page 4 - PROPER DISPOSAL OF THE DISPLAY CASE; RISK OF CHILD ENTRAPMENT; USE OF EXTENSION CORDS; Before You Throw Away Your Old Display Case:

............ www.truemfg.com ............ True Food Service Equipment, Inc. 2 2 SAFETY INFORMATION PROPER DISPOSAL OF THE DISPLAY CASE DANGER! RISK OF CHILD ENTRAPMENT USE OF EXTENSION CORDS NEVER USE AN EXTENSION CORD! TRUE will not warranty any display case that has been connected to an extension ...

Page 5 - NEMA plugs

............ www.truemfg.com ............ True Food Service Equipment, Inc. 3 3 Before your new display case is connected to a power supply, check the incoming voltage with a voltmeter. If anything less than 100% of the rated voltage for operation is noted, correct immediately. Have the circuit chec...

Page 6 - INSTALLATION / OPERATION INSTRUCTIONS; OWNERSHIP; Hammer; REQUIRED TOOLS; Cut metal retaining straps securing protective; UNCRATING

............ www.truemfg.com ............ True Food Service Equipment, Inc. 4 4 INSTALLATION / OPERATION INSTRUCTIONS To insure that your unit works properly from the first day, it must be installed properly. We highly recommend a trained mechanic and electrician install your True equipment. The cos...

Page 7 - To avoid damage to glass DO NOT lay cabinet; LOCATING; Dry bakery cases require hard wiring unless; LEVELING

............ www.truemfg.com ............ True Food Service Equipment, Inc. 5 5 INSTALLATION / OPERATION INSTRUCTIONS TOOLS REQUIRED: • Phillips screw driver • 3 / 8 ” (9.5 mm) socket or 3 / 8 ” (9.5 mm) wrench Step 2 A. Use a Phillips screw diver and remove four screws from the L-bracket connected ...

Page 8 - Refer to cabinet data plate for voltage.; ELECTRICAL INSTRUCTIONS; GLASS DISPLAY CASES

............ www.truemfg.com ............ True Food Service Equipment, Inc. 6 6 INSTALLATION / OPERATION INSTRUCTIONS Step 4 NOTEHard wiring is required on standard "Dry" Bakery Cases. NOTEOptional 12" (30.5 cm) corded model available, fac-tory installed only. (exterior scale receptacle ...

Page 9 - CONDUCTORS AND CIRCUITS; Distance In Feet To Center of Load; Distance In Feet To Center of Load

............ www.truemfg.com ............ True Food Service Equipment, Inc. 7 7 INSTALLATION / OPERATION INSTRUCTIONS CONDUCTORS AND CIRCUITS Wire Guage for 2% Voltage Drop in Supply Circuits. 115 Volt Distance In Feet To Center of Load Amps 20 30 40 50 60 70 80 90 100 120 140 160 2 14 14 14 14 14 1...

Page 10 - SHELVING INSTALLATION

............ www.truemfg.com ............ True Food Service Equipment, Inc. 8 8 INSTALLATION / OPERATION INSTRUCTIONS SHELVING INSTALLATION ("DRY" BAKERY) SHELF INSTALLATION:A. Lift each door up and out of track (do not dis- connect elastic tubing). Stretch elastic surgical tubing and set do...

Page 11 - Curved glass can be damaged if you lay unit; OPTIONAL

............ www.truemfg.com ............ True Food Service Equipment, Inc. 9 9 INSTALLATION / OPERATION INSTRUCTIONS CASTOR INSTALLATION: TOOLS REQUIRED: • Castor wrench (if not included contact True)• Adjustable wrench NOTECastors not available for hard wired models. WARNINGMake sure unit is empty...

Page 12 - FORMICA KIT INSTALLATION:

............ www.truemfg.com ............ True Food Service Equipment, Inc. 10 10 INSTALLATION / OPERATION INSTRUCTIONS FORMICA KIT INSTALLATION: FORMICA KIT COMPONENTS: (2) Formica Top End Panels 10 3 / 4 "w x 33"h (27.3 cm x 83.8 cm). (2) Bottom End Panels (1) left side, (1) right side (Fo...

Page 13 - CABINET CLEANING

............ www.truemfg.com ............ True Food Service Equipment, Inc. 11 11 MAINTENANCE, CARE & CLEANING • The exterior may be wiped clean with mild soap and water. Use a good stainless cleaner on coun-tertop. CAUTION: Do not use any steel wool, abrasive or chlorine based products to clean...

Page 14 - LIGHT BULB REPLACEMENT; SHELF MOUNTED BULB REPLACEMENT:

............ www.truemfg.com ............ True Food Service Equipment, Inc. 12 12 MAINTENANCE, CARE & CLEANING LIGHT BULB REPLACEMENT SHELF MOUNTED BULB REPLACEMENT: WARNINGWhen replacing a light bulb make sure power to the unit is either turned off or unplugged. A. Unplug the light assembly fro...