TRUE TBB-2 - Manuals

TRUE TBB-2 – Manual in PDF format online.

Manuals:

Manual

Manual TRUE TBB-2

Summary

Page 3 - SAFETY INFORMATION; We strongly recommend that any; How to Maintain Your; SAFETY PRECAUTIONS

............ www.truemfg.com ............ SAFETY INFORMATION True Food Service Equipment, Inc. 1 1 • This refrigerator must be properly installed and located in accordance with the Installation Instructions before it is used. • Do not allow children to climb, stand or hang on the shelves in the refr...

Page 4 - PROPER DISPOSAL OF THE REFRIGERATOR; RISK OF CHILD ENTRAPMENT; USE OF EXTENSION CORDS; • Take off the doors.

............ www.truemfg.com ............ True Food Service Equipment, Inc. SAFETY INFORMATION 2 2 PROPER DISPOSAL OF THE REFRIGERATOR DANGER! RISK OF CHILD ENTRAPMENT USE OF EXTENSION CORDS NEVER USE AN EXTENSION CORD! TRUE will not warranty any refrigerator that has been connected to an extension ...

Page 5 - NEMA plugs

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance. Have the wall outlet and circuit checked by a qualified electrician to make sure the outl...

Page 6 - INSTALLATION / OPERATION INSTRUCTIONS; True; OWNERSHIP; Keys for coolers with door locks are located in; UNCRATING; If you have any questions regarding this section,

............ www.truemfg.com ............ True Food Service Equipment, Inc. INSTALLATION / OPERATION INSTRUCTIONS 4 4 To insure that your unit works properly from the first day, it must be installed properly. We highly recommend a trained refrigeration mechanic and electrician install your True equi...

Page 7 - When lifting unit do not use the countertop as; LOCATING; Warning; LEVELING

............ www.truemfg.com ............ INSTALLATION / OPERATION INSTRUCTIONS True Food Service Equipment, Inc. 5 5 TOOLS REQUIRED: • Phillips screw driver • 3/8” socket or 3/8” wrench Step 2A. Use a phillips screw diver and remove four screws from the L-bracket connected the unit to the wood skid...

Page 8 - CONDUCTORS AND CIRCUITS; Distance In Feet To Center of Load; Distance In Feet To Center of Load

............ www.truemfg.com ............ True Food Service Equipment, Inc. 6 6 CONDUCTORS AND CIRCUITS Wire Gauge for 2% Voltage Drop in Supply Circuits. 115 Volt Distance In Feet To Center of Load Amps 20 30 40 50 60 70 80 90 100 120 140 160 2 14 14 14 14 14 14 14 14 14 14 14 14 3 14 14 14 14 14 1...

Page 9 - SEALING CABINET TO FLOOR

............ www.truemfg.com ............ True Food Service Equipment, Inc. 7 7 Step 1 - Position Cabinet Allow one inch between the wall and rear of the refrigerated Bar Equipment to assure proper ventilation. For Glass & Plate Chillers/Frosters 3 inches between the wall and rear of the cabinet...

Page 10 - Before your new unit is connected to a; ELECTRICAL INSTRUCTIONS; barbed fitting supplies with the unit.; BEER DISPENSERS

............ www.truemfg.com ............ True Food Service Equipment, Inc. 8 8 INSTALLATION / OPERATION INSTRUCTIONS Step 4A. Before your new unit is connected to a power supply, check the incoming voltage with a voltmeter. If anything less than 100% of the rated voltage for operation is noted, cor...

Page 11 - The compressor is ready to operate. Plug in the; STARTUP

INSTALL DRAFT ARM continued... Insert air hose (one inch plastic tube) in draft arm, being careful not to disturb insulation. Remove top cover of draft arm and attach air hose clip to the insulating sleeve at the top of the draft arm. Replace top cover. The air hose clip will assure that the hose re...

Page 12 - SHELF INSTALLATION; STORAGE AND HANDLING

............ www.truemfg.com ............ True Food Service Equipment, Inc. 10 10 ;; ;; ;;; ;;; ;; ;; ;; ;;; ;;;; ;;; ;; ;; ;; ;;; ;;;; ;;; ;; ;; ;; ;;; ;; ;; ;;; ;;;;;;; ;; ;;;;;;; ;; ;; ;; ;; ;;;; ;;;;; ;; ;; ;; ;; ;; ;;;; ;; ;;; ;; ;;; ;; ;; ;;;;; ;; ;; ;; ;; ;; ;; ;;;; ;; ;; ;; ;; ;; ;; ;; ;; ; ...

Page 13 - PRESSURE; TEMPERATURE; TAPPING

............ www.truemfg.com ............ True Food Service Equipment, Inc. 11 11 INSTALLATION / OPERATION INSTRUCTIONS Dispensing pressures differ according to: • The type of draft dispensing system• The length of draft dispensing line• The actual product - some require more, some require less• The...

Page 14 - is all foam and not enough liquid beer.; DRAFT BEER PROBLEMS; To minimize draft beer problems, always follow the recommended

............ www.truemfg.com ............ True Food Service Equipment, Inc. 12 12 INSTALLATION / OPERATION INSTRUCTIONS Flat Beer - Description: Foamy head disappears quickly. Beer lacks usual zestful brewery fresh flavor. • CO2 turned off when not in use.• Contaminated air source (associated with c...

Page 15 - Phillips Head Screwdriver

............ www.truemfg.com ............ True Food Service Equipment, Inc. 13 13 MAINTENANCE, CARE & CLEANING TERMS: Cut-out - Temperature sensed by the controller that shuts the compressor off. Cut-in - Temperature sensed by the controller that turns the compressor on. REQUIRED TOOLS • Phillip...

Page 16 - CHANGING CO2 GAS CYLINDER

............ www.truemfg.com ............ True Food Service Equipment, Inc. 14 14 Follow these instructions at ALL times when you replace a CO2 gas cylinder: 1. Close cylinder at "A". 2. Remove tap "D" from barrel. Pull pressure release ring on body of tap to release pressure remaini...

Page 17 - NOTE; CLEANING BAR SYSTEM

............ www.truemfg.com ............ True Food Service Equipment, Inc. 15 15 ............ www.truemfg.com ............ 15 Draught dispensers, regardless of design, must be cleaned at least every two weeks. Flushing your draught dispenser with water only is not enough. Note: Use cleaners approve...

Page 18 - CLEANING THE CONDENSER COIL

............ www.truemfg.com ............ True Food Service Equipment, Inc. 16 16 MAINTENANCE, CARE & CLEANING MAINTENANCE, CARE & CLEANING CLEANING THE CONDENSER COIL When using electrical appliances, basic safety precautions should be followed, including the following: T M C TRUE REQUIRED ...

Page 19 - HOW TO CLEAN THE CONDENSER:; and; Condensing Unit; IMPORTANT WARRANTY INFORMATION

............ www.truemfg.com ............ True Food Service Equipment, Inc. 17 17 Condensers accumulate dirt and require cleaning every 30 days. Dirty condensers result in compressor failure, product loss, and lost sales... which are not covered by warranty. If you keep the Condenser clean you will ...

Page 20 - STAINLESS STEEL EQUIPMENT CARE AND CLEANING

............ www.truemfg.com ............ True Food Service Equipment, Inc. 18 18 MAINTENANCE, CARE & CLEANING CAUTION: Do not use any steel wool, abrasive or chlorine based products to clean stainless steel surfaces. • Stainless Steel Opponents There are three basic things which can break down ...

Page 21 - The use of stainless steel cleaners or other such solvents is not

............ www.truemfg.com ............ True Food Service Equipment, Inc. 19 19 MAINTENANCE, CARE & CLEANING Recommended cleaners for certain situations / environments of stainless steel A) Soap, ammonia and detergent medallion applied with a cloth or sponge can be used for routine cleaning. B...

Page 22 - When replacing a light bulb make sure

............ www.truemfg.com ............ True Food Service Equipment, Inc. 20 20 ............ www.truemfg.com ............ INSTALLATION / OPERATION INSTRUCTIONS Be careful when removing the light bulb. Please be aware of your local ordinances in disposing old f lorescent bulbs. These bulbs should b...