Tripp Lite DWT2647XP - Manuals

5 1b. Mount on Solid Brick and Concrete Block Mark the exact location of mounting holes Screw the wall plate onto the wall Drill pilot holes WARNING • When installing wall mounts on cinder block, verify the actual concrete thickness is at least 1-3/8” (35mm) for using the concrete anchors. Do not dr...

6 Note: Choose appropriate screws, washers and spacers (if necessary) according to the type of screen.• Position the adapter brackets as close as possible to the center of the display. • Screw the adapter brackets onto the display. Tighten all screws but do not over tighten. 2. Install Adapter Brack...

7 3. Hang Display onto the Wall Plate 4. Adjustment Bolt Wall Wall Tighten the two bolts by using an appropriate phillips screwdriver to secure bracket. Loosen the adjusting knobs to tilt to desired angle then retighten the knobs. Maintenance • Check that the bracket is secure and safe to use at reg...