Page 2 - WP; All
2 Package Contents Product Features B126-1A1 B126-1A1- WP B126-002 B126-004 B126-1A0 B126-1A0- WP -1 B126-1P0 B126-1P0- WP -1 B126-110 Local Unit (L), Remote Unit (R), or Both (B) B B L L R R R R R External Power Supplies (0, 1, or 2) 2 2 1 1 1 1 0 0 1 Mounting Hardware X X X X X Wallplate Screws X ...
Page 3 - Product Features; • RJ45-style wallplates allow for the use of standard Cat5e/6 patch
3 Product Features B126-1A1 • HDMI over Cat5 Active Extender Kit (Box-style)• Extends a 1080i (60Hz) signal up to 200 ft. from the source, or a 1080p (60Hz) signal up to 150 ft. from the source • Features an additional HDMI port on the local transmitter unit for the connection of local monitor • Rem...
Page 4 - • 4-Port HDMI over Cat5 Extender/Splitter Local Transmitter Unit
4 Product Features B126-004 • 4-Port HDMI over Cat5 Extender/Splitter Local Transmitter Unit (Box-style) • Splits an HDMI signal into 4• Features an additional HDMI port, which can be used to connect a local monitor or to daisy-chain additional B126-004 units. Up to 3 B126-004 units can be daisy-cha...
Page 5 - cables 110 punchdown connection not required
5 Product Features B126-1A0-WP-1 • HDMI over Cat5 Active Extender Wallplate• Works with B126-002 and B126-004 extender/splitters to extend a 1080i (60Hz) signal up to 200 ft. from the source, or a 1080p (60Hz) signal up to 150 ft. from the source • Features a built-in Equalization control for video ...
Page 6 - repeater unit in the installation; Optional Accessories:
6 Product Features B126-110 • HDMI over Cat5 Active Extender Remote/Repeater Unit (Box-style)• Extends and expands Tripp Lite HDMI over Cat5 installation, allowing multiple monitors to be located at different points in a chain of up to 700 ft. • Extends a 1080i (60Hz) signal up to 175 ft., or a 1080...
Page 7 - Mounting Instructions; methods. Note: The B126-004 can also be mounted to a Tripp Lite; Wallmount
7 Mounting Instructions (select models only) The B126-002, B126-004, B126-1A1, B126-1A0 and B126-110 come with mounting hardware that allows them to be mounted in a variety of ways. The following images show the different ways the included mounting brackets can be attached for different mounting met...
Page 8 - Standard Extender Kit Installation; ) To achieve maximum distance and performance, use 24 AWG solid
OPTIONAL LOCAL MONITOR LOCAL TRANSMITTER REMOTE RECEIVER Up to 200 ft. at 1080i (60Hz) Up to 150 ft. at 1080p (60Hz) BLU-RAY 8 Standard Extender Kit Installation Notes:1) Test to make sure the entire installation works properly before pulling cables through ceilings/walls. 2) To achieve maximum dist...
Page 9 - Connect the HDMI source to the INPUT port on the B126-1A1 or
9 Standard Extender Kit Installation 1 Make sure the HDMI source is powered OFF. 2 Connect the HDMI source to the INPUT port on the B126-1A1 or B126-1A1-WP local unit using a Tripp Lite P568-Series HDMI Cable. 3 Optional for B126-1A1: Connect a local monitor to the LOCAL port on the B126-1A1 local u...
Page 10 - Extender Kit with Remote/Repeater Installation
OPTIONAL LOCAL MONITOR B126-1A1 LOCAL TRANSMITTER B126-1A1 REMOTE RECEIVER B126-110 REMOTE REPEATER B126-110 REMOTE REPEATER B126-110 REMOTE REPEATER Up to 175 ft. at 1080i (60Hz) Up to 125 ft. at 1080p (60Hz) Up to 175 ft. at 1080i (60Hz) Up to 125 ft. at 1080p (60Hz) BLU-RAY Up to 175 ft. at 1080i...
Page 11 - HDMI port using a Tripp Lite P568-Series HDMI Cable.
11 Extender Kit with Remote/Repeater Installation 3 Optional for B126-1A1: Connect a local monitor to the LOCAL HDMI port using a Tripp Lite P568-Series HDMI Cable. 4 Connect the external power supply to the local unit and plug it into a Tripp Lite Surge Suppressor, PDU or UPS. The green LED illumin...
Page 12 - To add a third remote/repeater unit, repeat steps 8 through 10.
12 Extender Kit with Remote/Repeater Installation 11 To add a third remote/repeater unit, repeat steps 8 through 10. To finish your installation with the B126-1A1 or B126-1A1-WP remote receiver unit, proceed to step 12. 12 Using Cat5e/6 cable, connect the RJ45 OUTPUT port on the last remote/repeater...
Page 13 - Standard Extender/Splitter Installation
B126-004 OPTIONAL LOCAL MONITOR BLU-RAY B126-1P0-WP-1 B126-1A0-WP-1 B126-1P0 B126-1A0 Up to 100 ft. at 1080i (60Hz)Up to 50 ft. at 1080p (60Hz) Up to 200 ft. at 1080i (60Hz)Up to 150 ft. at 1080p (60Hz) 13 Standard Extender/Splitter Installation Notes:1) Test to make sure the entire installation wor...
Page 14 - Make sure the HDMI source is powered OFF.
14 Standard Extender/Splitter Installation 1 Make sure the HDMI source is powered OFF. 2 Connect the HDMI source to the INPUT port on the B126-002 or B126-004 using a Tripp Lite P568-Series HDMI Cable. 3 Optional for B126-004: Connect an HDMI monitor to the LOCAL port on the B126-004 using a Tripp L...
Page 15 - Repeat step 9 for each additional monitor you are connecting.
15 Standard Extender/Splitter Installation 10 Repeat step 9 for each additional monitor you are connecting. 11 Turn on the power to the HDMI source. The orange RJ45 LEDs illuminate on the B126-002 and B126-004 to indicate the unit is receiving a signal from the source. The screen should now be displ...
Page 16 - Extender/Splitter with Remote/Repeater Installation
OPTIONAL LOCAL MONITOR B126-004 LOCAL TRANSMITTER B126-110 REMOTE/ REPEATER B126-110 REMOTE/ REPEATER B126-110 REMOTE/ REPEATER Up to 175 ft. at 1080i (60Hz) Up to 125 ft. at 1080p (60Hz) Up to 175 ft. at 1080i (60Hz) Up to 125 ft. at 1080p (60Hz) BLU-RAY B126-110 REMOTE/ REPEATER B126-110 REMOTE/ R...
Page 18 - An
18 Extender/Splitter with Remote/Repeater Installation 10 Connect the external power supply to the remote/repeater unit and plug it into a Tripp Lite Surge Suppressor, PDU or UPS. The green power LED and the green RJ45 LEDs illuminate to indicate the unit is receiving power. 11 To add a third remote...
Page 19 - Extender/Splitter Daisy-Chain Installation
19 Extender/Splitter Daisy-Chain Installation (B126-004 only) Notes:1) Test to make sure the entire installation works properly before pulling cables through ceilings/walls. 2) To achieve maximum distance and performance, use 24 AWG solid wire Cat5e/6 cable. Using stranded wire Cat5e/6 cable, or cab...
Page 23 - Remote/Repeater Installation
23 Extender/Splitter Daisy-Chain with Remote/Repeater Installation (B126-004 only) Notes:1) Test to make sure the entire installation works properly before pulling cables through ceilings/walls. 2) To achieve maximum distance and performance, use 24 AWG solid wire Cat5e/6 cable. Using stranded wire ...
Page 27 - If necessary, use the Equalization control on the remote/repeater; Warranty & Warranty Registration
27 Extender/Splitter Daisy-Chain with Remote/Repeater Installation (B126-004 only) 20 If necessary, use the Equalization control on the remote/repeater unit(s) and remote receiver unit to adjust the video image. Note: An improper Equalization setting can cause the monitor not to display a picture at...