Tripp Lite B119-4X4 - Manuals

Page 2 - routed to multiple outputs; Optional Accessories:

2 Package Contents Product Features • B119-2X2 or B119-4X4 Local Transmitter Unit• External Power Supply (Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A)* • 3.5 mm to DB9 Adapter Cable• Mounting Hardware• Remote Control• Owner’s Manual *The B119-4X4 comes with a 5V, 3A power supply • Share multiple H...

Page 3 - Mounting; different mounting methods.; Wallmount 1

3 Mounting The B119-2X2 and B119-4X4 come with mounting hardware that allows them to be mounted in a variety of ways. The following images show the different ways the included mounting brackets can be attached for different mounting methods. Note: The images below show a B126-1A1 HDMI over Cat5 Rece...

Page 4 - Standard Installation; Make sure all devices being connected are turned off.

4 Standard Installation Note: 1. The diagram below shows a B119-2X2 installation, but installation will be the same for the B119-4X4, except for the number of ports. 2. The back panel of the B119-4X4 contains an IR port which has been capped off. This port is intended for future use, and does not cu...

Page 5 - Turn on the power to the connected devices. The video image should; section in this manual for details on

5 Standard Installation 6 Connect the first HDMI display to the port on the switch marked Output 1 . Note: The HDMI cable connecting the switch to a display must be no longer than 25 ft. 7 Repeat step 6 to connect additional displays to the remaining ports. 8 Turn on the power to the connected devic...

Page 6 - RS-232 Serial Control; Go to the

6 RS-232 Serial Control Before using RS-232 Serial Control, you must first go into your Terminal Emulation Software and update the COM port settings. 1 Go to the Setup drop-down menu and select the Serial Port option. 2 Select the COM port that is being used, and update the remaining settings as fol...

Page 8 - Command; of sw1 2 would display source 2 on output 1.

8 RS-232 Serial Control 5 Once these settings are updated, the Terminal Emulation Software will recognize the switch, allowing you to enter commands to control it with. The following table lists the available commands. Command Action sw[x] [n] Switches the source being displayed on the selected outp...

Page 9 - Troubleshooting; are set according to the instructions in the

9 Troubleshooting If you are unable to get an acceptable image after following the installation instructions, try the troubleshooting tips below. 1 Is the external power supply that came with the product connected and plugged into a working power source? For the product to function properly, it must...

Page 10 - Warranty & Warranty Registration; -Year Limited Warranty

10 Warranty & Warranty Registration 1-Year Limited Warranty TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at i...

Page 11 - WARNING

11 Warranty & Warranty Registration WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union) Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite th...