Tripp Lite B020-U16-19-K - Manuals

Tripp Lite B020-U16-19-K – Manual in PDF format online.

Manuals:

Manual

Manual Tripp Lite B020-U16-19-K

Summary

Page 2 - Table of Contents

1. Features 3 2. System Requirements 3 2.1 Computer 3 2.2 Console 3 2.3 Cables 3 3. Introduction 4 3.1 Front View of Console KVM Switch 4 3.2 Rear View of Console KVM Switch 5 3.3 Front View of B022-U16 5 3.4 Rear View for B022-016 6 4. Installation 6 4.1 Pre-Installation Safety Instructions 6 4.2 R...

Page 3 - System Requirements; Operating Systems

1. Features • Integrated KVM console with 19” LCD for the B020-U08-19-K, B020-U08-19KTAA and B020-U16-19-K.• B020-U08-19-K, B020-U08-19KTAA and B020-U16-19-K come with (8) P778-Series USB/PS2 Combo KVM Cable Kits.• B020-U08-19-K, B020-U08-19KTAA and B020-U16-19-K come with an external console port, ...

Page 4 - Front View of Console KVM Switch

1. Handle Pull to slide the KVM module out; push to slide the module in (see item 13 in this table). 2. LCD Display After sliding the KVM module out, flip up the cover to access the LCD monitor. 3. LCD Controls The LCD On/Off switch is located here, as well as buttons to control the position and pic...

Page 5 - Rear View of Console KVM Switch

1. Port Push-Buttons/LEDs There are 16 port selection push-buttons on the front panel, all of which contain an LED. • Press the push-button of any port to switch the KVM’s focus to that port. • An orange LED illuminates when a computer is connected to the port and powered-on. • A green LED illuminat...

Page 7 - extensive work by a qualified technician to repair.; Rack Mounting Safety Instructions; Rackmounting Instructions for Console KVMs

• If the following conditions occur, unplug the device from the wall outlet and bring it to qualified service personnel for repair: • The power cord or plug has become damaged or frayed. • Liquid has been spilled into the device. • The device has been exposed to rain or water. • The device has been ...

Page 9 - F3 SET; Hot Plugging Console Ports; same; Opening the NetDirector Console KVM

All KVM switches support hot plugging—components can be removed and added back into the installation by unplugging their cables from the ports without having to shut the switch down. However, in order for hot plugging to work properly, these procedures must be followed: Switching Station Positions S...

Page 10 - The LCD OSD allows you to set up and configure the LCD display:; Menu; switch will continue to receive power via these computers.; Exit

5.3 LCD OSD (On-Screen Display) Configuration 5.4 Sharing USB Peripheral Devices 5.5 Powering Off and Restarting 5. Basic Operation The LCD OSD allows you to set up and configure the LCD display: • To open up the LCD OSD main menu, press the button marked Menu. • Use the | and | buttons to navigate ...

Page 11 - Invoking the Hotkey Mode; Control and F12 keys; Station Number; Port 7

6. Hotkeys NetDirector KVM Switches can be easily operated using hotkey commands. This chapter discusses the available hotkeys and their functions. Below is a list of the various hotkeys, broken up into hotkeys for port control and hotkeys that perform other functions. Port Control Hotkeys • Selecti...

Page 12 - Enter; Arrow

6. Hotkeys 6.4 Auto Scanning 6.5 Starting Auto Scan 6.6 Pausing in Auto Scan 6.7 Skip Mode 6.8 Hotkey Beeper Control 6.9 Computer Keyboard/Mouse Reset Auto Scan allows the connected computers to be monitored automatically, without having to manually toggle between ports. When in Auto Scan Mode, the ...

Page 13 - Scroll Lock, Scroll Lock; After pressing the; Hotkey Command

6. Hotkeys 6.10 Quick Hotkey Control 6.11 OSD Hotkey Control 6.12 Port OS Control 6.13 Restore Default Values 6.14 Hotkey Summary Table The hotkey sequence to invoke Hotkey Mode can be toggled via hotkey command as well as OSD. (See page 15 for changing the Hotkey Mode invocation sequence via OSD.) ...

Page 14 - and; Logging In For The First Time; Heading

• To close the menu and deactivate OSD, click the [X] at the upper right corner of the OSD Window; or press [Esc]. • To logout, press [F8] , or click F8 , on the OSD Menu Bar or click the z Z z symbol at the upper right hand corner of the OSD Screen. • To move up or down one line at a time, click th...

Page 15 - Choice; applies to the port that is currently active.

7. OSD (On-Screen Display) Operation 7.6 OSD Functions OSD functions allow the KVM to be controlled and configured via the OSD. Using these functions you can quickly jump to a port on the installation, start an auto scan, limit the port list that displays when you access the OSD, create/edit port na...

Page 18 - on the installation.; F2 LIST; field or pressing; Firmware Upgrade Utility; ADM

F6 Broadcast Mode (BRC) F6 is an Administrator-ONLY function. Clicking the F6 field, or pressing [F6] , invokes Broadcast (BRC) Mode. When this function is in effect, commands sent from the console are broadcast to all available computers on the installation. This function is particularly useful for...

Page 19 - I Agree; Starting the Upgrade; Finish

To upgrade your firmware: 1. Run the downloaded Firmware Upgrade Utility by double-clicking the file icon or by opening a command line and entering the full path to it. The Firmware Upgrade Utility Welcome screen appears. 2. Read and Agree to the License Agreement (click the I Agree radio button). 3...

Page 20 - Recover; Firmware Upgrade Recovery Switch; Normal; Firmware Upgrade Recovery; Specification

8. Firmware Upgrade Utility 9. Appendix A A firmware upgrade recovery is required in any of the following situations: • When you invoke Firmware Upgrade Mode (see page 18), but decide not to proceed with the upgrade.• When the main board firmware upgrade fails.• When the I/O firmware upgrade fails. ...

Page 21 - All; OSD Factory Default Settings; Mac Keyboard; Mac keyboard. The emulation mappings are listed in the table below.; Sun Keyboard; keys. The corresponding functions are shown in the table below.; Keyboard Emulation

The factory default settings are as follows: Setting Default OSD Hotkey [Scroll Lock] [Scroll Lock] * Port ID Display Position Upper Left Corner Port ID Display Duration 3 Seconds Port ID Display Mode The Port Number plus the Port Name Scan Duration 5 Seconds Scan/Skip Mode All Screen Blanker 0 (Dis...

Page 22 - Warranty Registration; -YEAR LIMITED WARRANTY

FCC Notice, Class A This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note...