Tripp Lite B013-000 - Manuals

Page 2 - Overview; Note: You can control numerous remote systems from a single; console by combining the B013-000 with a KVM switch.

Overview Because the B013-000 Console Extender System allows access to acomputer system from a remote console (keyboard, monitor, andmouse), it is perfect for factory and construction sites, or any type ofinstallation where the console needs to be kept in a convenientlyaccessible location, but you w...

Page 3 - Consoles; Note: 1. If you connect a DDC type monitor to the Local unit, the

Features l Uses Inexpensive, Reliable, Category 5 STP Ethernet Cable toConnect the Local and Remote Units l Dual Console Operation - Control Your System From Both theLocal and Remote PS/2 Keyboard, Mouse, and Monitor Consoles l Push Button Selection of the Active Console l High Resolution Video - Up...

Page 4 - PCs; With AT Type Connectors:; Cables

PCs The following equipment must be installed on each PC that is to beconnected to the system: With PS/2 Type Connectors: M A VGA, SVGA or Multisync card. M A 6-pin mini-DIN mouse port M A 6-pin mini-DIN keyboard port With AT Type Connectors: M A VGA, SVGA or Multisync card. M A DB-9 (standard seria...

Page 5 - Components; Operating Mode Selection Switch; The local PS/2 mouse plugs into this connector.

Components The Local Unit (B013-000 Local) Front View: 1. Operating Mode Selection Switch Pressing this button cycles you through the operating modechoices: M Local - only the local console can control the system(s); M Auto - both consoles can control the system(s)). 2. LEDs The Local Unit has two L...

Page 6 - The cable from the AC Power Adapter plugs into this jack.; Rear View

6. Remote I/O The Category 5 twisted pair cable that connects to the RemoteUnit plugs into this connector. 7. Power Jack The cable from the AC Power Adapter plugs into this jack. The Local Unit (B013-000 Local) Rear View 1. Monitor Port The extension cable that connects to the computer’s VGA portplu...

Page 7 - Front View; The remote PS/2 mouse plugs into this connector.

The Remote Unit (B013-000 Remote) Front View 1. LEDs The Remote Unit has two LEDs (Power and On Line) to indicatethe operating status of the Local and Remote units (see p. 8, fordetails). 2. Mouse Port The remote PS/2 mouse plugs into this connector. 3. Keyboard Port The remote PS/2 keyboard plugs i...

Page 8 - Installation; Note: The female monitor connector is the one that plugs into the

Installation Setting up the Console Extender System is simply a matter ofplugging in the cables: 1. Make sure that all the equipment to be connected up is powered Off. 2. Plug the cables from the local console devices (mouse, keyboard, monitor), into their ports on the Console side of the Local Unit...

Page 9 - Operation

Operation The Local and Remote Units each have two LEDs to indicate theiroperating status, as shown in the tables, below: B013-000 Local (Local Unit): LED Operating Mode Local Auto Local Lights to indicate that thelocal console is active(the Remote LED is out). 1. Lights when the local console is ac...

Page 10 - Appendix; Troubleshooting; TP Wiring Diagram

Appendix Troubleshooting Symptom Action No Video Make sure that all cables are securely plugged into theirsockets. TP Wiring Diagram TP Pin Assignments Pin Assignment 1 V OUT B 2 /V OUT B 3 V OUT G 4 V OUT R 5 /V OUT R 6 /V OUT G 7 /DO 8 DO JACK POSITIONS PAIR 2 PAIR 1 PAIR 3 PAIR 4 T568B AT&T 2...

Page 11 - Specifications

Specifications Function B013-000 Local B013-000 Remote Connectors Keyboard 2 x 6 pin mini-DIN female 6 pin mini-DIN female Mouse 2 x 6 pin mini-DIN female 6 pin mini-DIN female Monitor 1 x 15 pin HDB male1 x 15 pin HDB female 1 x 15 pin HDB female Unit To Unit 8P8C Jack LEDs 1 Local1 Remote 1 Power ...