Tripp Lite B004-2DUA4-K - Manuals

5 Features Back Panel 4 No. Component Description 1 Quad-View Mode Port This port is used to connect two Dual Display KVM switches together via standard Cat5e/6 cable. When connected together, computers with four DVI output ports can share KVM, audio and USB peripherals ( see the Quad-View Mode sect...

6 Safety Instructions • Read all of these instructions. Save them for future reference.• Follow all warnings and instructions marked on the device.• Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result. • Do not use the device ne...

8 Installation Standard Installation Refer to the following steps and diagram to set up your KVM switch installation. Notes: 1. Before making any connections, make sure that power to all devices being connected to the KVM switch is turned off. Unplug the power cords of any computers that have the Ke...

9 Installation 8 Connect a DVI cable to the DVI B port on the back of the KVM, and then into a DVI port on the computer being added to the installation. Note: The B004-2DUA2-K and B004-2DUA4-K come with 6 ft. DVI-D Dual Link Cables. If you need a longer cable, you will have to purchase a separate P5...

10 COMPUTER 1 HOST KVM CLIENT KVM Installation Quad-View Mode Installation Refer to the following steps and diagram to set up your KVM switch Quad-View Mode installation. Notes: 1. Before making any connections, make sure that power to all devices being connected to the KVM switch is turned off. Unp...

12 Basic Operation Powering Off and Restarting In the event that you need to power off the KVM switch, you must follow the steps below:1. Shut down all computers connected to the KVM switch2. Unplug the power supply from the KVM switch3. Wait 10 seconds and then plug the power supply back into the K...

13 Basic Operation Port Switching Hotkeys To switch functionality between ports, a keyboard hotkey command is entered that determines what port is accessed and which functionality is assigned to it. This command starts by pressing [Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl]. [Scroll Lock] [Scroll L...

14 Hotkey Setting Mode All configuration of the KVM’s settings takes place in Hotkey Setting mode. All commands in Hotkey Setting mode start by entering the Hotkey Setting Mode Activation Command . When Hotkey Setting Mode is activated, the [Scroll Lock] and [Caps Lock] keyboard LEDs flash in succes...

15 Basic Operation List KVM Settings This function allows you to display a list of the current KVM settings; Hotkeys, Keyboard OS, Keyboard Emulation, Mouse Emulation, Mouse Port Switching, Power On Detection and Keyboard Language . To perform this function, do the following. 1. Open up a Word, Word...

16 Basic Operation Power on Detection By default, the KVM is set to recognize when a connected computer is powered off, at which time it automatically switches to the next powered on port. To turn Power on Detection on/off , do the following. 1. Activate Hotkey Setting Mode using the aforementioned ...

17 Basic Operation Pushbutton 1 and 2 Command By default, pressing pushbuttons 1 and 2 at the same time for two seconds will initiate Auto Scan Mode , but you can set it to perform any Hotkey Setting Mode command that you want. The Restore Default Settings, Disable Port Switching Hotkeys , and Firmw...

18 Hotkey Setting Mode Command Summary Table Action Hotkey Command Activate Hotkey Setting Mode Press and hold the [Num Lock] key, press and release the minus [-] key, release the [Num Lock] key. Change Hotkey Setting Mode activation command to [Ctrl] [F12] Activate Hotkey Setting Mode , [H] Change ...

19 Basic Operation Sun Keyboard Emulation The PC compatible (101/104 key) keyboard can emulate the functions of the Sun keyboard using the PC keystrokes in the table below. Note: When more than one key is required on the PC Keyboard to emulate the Sun keyboard, press and release the first key, and t...

20 Firmware Upgrade Firmware Upgrade Utility As firmware upgrades become available, they can be found on the internet at www.tripplite.com/support. The Firmware Upgrade Utility comes with the firmware upgrade file. Firmware upgrades cannot be performed simultaneously when in Quad-View Mode. KVMs in ...

21 Factory Default Settings Setting Default Port Switching Hotkey Command [Scroll Lock], [Scroll Lock] Hotkey Setting Mode Activation Command [Num Lock], [-] Keyboard Operating System Auto-Detect Hotkey Beeper On Port Switching Hotkeys Enabled Keyboard Emulation Enabled Mouse Emulation Enabled Mouse...

22 Specifications Feature B004-2DUA2-K B004-2DUA4-K # of Computer Ports 2 4 Expandable (Cascade/Daisychain) Yes (Quad-View Mode) Yes (Quad-View Mode) Form Factor Desktop Desktop Port Selection Hotkeys, Pushbuttons, Mouse Switching Function* Hotkeys, Pushbuttons, Mouse Switching Function* Console Key...

23 Warranty and Warranty Registration TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such d...