Tripp Lite APSINT Series - Manuals

Page 2 - SAVE THESE INSTRUCTIONS!

2A Limited Warranty Tripp Lite warrants its Inverter/Chargers to be free from defects in materials and workmanship for a period of one year (except for outside of U.S.A., Canada and Mexico—120 days) from the date of retail purchase by end user Tripp Lite’s obligation under this warranty is limited t...

Page 3 - Feature Identification

3A Feature Identification Identify the premium features on your specific model and quickly locate instructions on how to maximize their use. Configuration DIP Switches: optimize Inverter/Charger operation depending on your application. See ConfigurationSection for setting instructions. Operating Mod...

Page 4 - Operation; Switch Modes

4A Operation Switch Modes After configuring, mounting and connecting your Inverter/Charger, youare able to operate it by switching between the following operatingmodes as appropriate to your situation: AUTO/REMOTE: Switch to this mode when you need constant, uninterrupted AC power for connectedappli...

Page 5 - Configuration; Set Configuration DIP Switches; Group A DIP Switches; Up

5A Configuration Select Battery Type—All Models(REQUIRED) CAUTION: The Battery Type DIP Switch setting must match the type of batteries you connect, or your batteriesmay be degraded or damaged over an extended period oftime. See “Battery Selection,” for more information. Battery Type Switch Position...

Page 7 - Battery Selection; 5 DC Amps × 5 Hrs. Runtime; Select Battery Type; Match Battery Amp-Hour Capacity to Your Application; • STEP 1) Determine Total Wattage Required; Example; Tools

7A Battery Selection 540 watts ÷ 12V = 45 DC Amps 45 DC Amps × 5 Hrs. Runtime × 1.2 Inefficiency Rating = 270 Amp-Hours 270 Amp-Hours ÷ 30 Amps Inverter/Charger Rating = 9 Hours Recharge Select Battery Type Select “Deep Cycle” batteries to enjoy optimum performance from your Inverter/Charger. Batter...

Page 8 - Mounting; Vehicular and Non-Vehicular Horizontal Mount; Using the measurements from the diagram, install two user-sup-; Vehicular and Non-Vehicular

8A Mounting WARNING! Mount your Inverter/Charger BEFORE DC battery and AC power connection. Failure to follow these instructions may lead to personal injuryand/or damage to the Inverter/Charger and connected systems. Tripp Lite manufactures a variety of different Inverter/Chargers with a variety of ...

Page 9 - Non-Vehicular or Vehicular; must match; Battery Connection; • Connect DC Wiring:

9A Non-Vehicular or Vehicular Non-vehicular applications include stationary configurations as well as mobile configurations that are not integrated into a vehicle’s electricalsystem. In a parallel connection, your Inverter/Charger’s Nominal DC Input Voltage (listed in the Specifications section as e...

Page 10 - AC Input/Output Connection; • Connect the incoming and outgoing ground wires to the

10A AC Input/Output Connection To avoid overloading your Inverter/Charger, be sure to match the power requirements of the equipment you plan to run at any one time (add theirtotal watts) with the output wattage capacity of your Inverter/Charger model. When figuring the power requirements of your equ...

Page 11 - Battery Indicator Lights

11A Service If you are returning your Inverter/Charger to Tripp Lite, please pack it carefully, using the ORIGINAL PACKING MATERIAL that camewith the unit. Enclose a letter describing the symptoms of the problem. If the Inverter/Charger is within the warranty period, enclose a copyof your sales rece...