Tripp Lite AGSM152DRTi2U - Manuals

Page 2 - Important Safety Instructions; SAVE THESE INSTRUCTIONS

2 Important Safety Instructions SAVE THESE INSTRUCTIONS This manual contains important instructions that should be followed during the installation, operationand storage of all Tripp Lite UPS Systems. Failure to heed these warnings will void your warranty. UPS Location Warnings • Use caution when li...

Page 4 - continued; All UPS Models

Mounting (Rack) continued 2-Post (Telecom) Mounting Mount 1U UPS models in 2-post racks with user-supplied hardware following the procedure below. If you mount 2U UPS models in 2-post racks, they require the addition of a Tripp Lite 2-PostRackmount Installation Kit (model: 2POSTRMKIT, sold separatel...

Page 5 - Quick Installation; Insert the female plug of com-

5 Quick Installation Unplug computer’s power cordfrom both AC outlet and computer’sAC input. Insert the female plug of com- puter’s cord into UPS’s AC input.Insert the male plug of computer’scord into AC outlet.* NOTE! after you plug the UPS into a live AC outlet, the UPS willautomatically charge it...

Page 6 - Optional Installation; Use the included USB cable (see

Optional Installation These connections are optional. Your UPS will functionproperly without these connections. Note: SMX3000XLRT2Ushown in all diagrams. USB and RS-232 SerialCommunications (all models) Use the included USB cable (see ) and/or DB9 serial cable (see ) to connect the communication por...

Page 7 - Basic Operation

7 “POWER” Button • To turn the UPS ON: with the UPS plugged into a live AC wall outlet*, press and hold the POWER button for one second.** Release the button. If utilitypower is absent, you can “cold-start” the UPS (i.e.: turn it ON and supply powerfor a limited time from its batteries***) by pressi...

Page 8 - this green LED lights continuously when the UPS is ON and

Basic Operation continued Indicator Lights (Front Panel) All Indicator Light descriptions apply when the UPS is plugged into a wall outletand turned ON. “POWER” LED: this green LED lights continuously when the UPS is ON and supplying connected equipment with AC power from a utility source. The LEDfl...

Page 9 - Your UPS features IEC320-C13 outlets, and select models

9 Basic Operation continued Other UPS Features (Rear Panel) AC Receptacles: Your UPS features IEC320-C13 outlets, and select models also feature IEC320-C19 outlets. These output receptacles provide your con-nected equipment with AC line power during normal operation and battery powerduring blackouts...

Page 10 - Remove the small cover panel from this slot to install optional

Basic Operation continued Accessory Slot: Remove the small cover panel from this slot to install optional accessories to remotely monitor and control your UPS. Refer to your accessory’smanual for installation instructions. Contact Tripp Lite Customer Support at(773) 869-1234 for more information, in...

Page 11 - Storage and Service; Storage; Before returning your UPS for service, follow these steps:

11 Storage and Service Storage Before storing your UPS, turn it completely OFF: with the UPS ON and receiving utility power,press and hold the POWER button for one second (an alarm will beep once briefly after the inter-val has passed); then, unplug the UPS from the wall outlet. If you store your UP...

Page 12 - Battery Replacement; Note on Labeling; Specifications; Procedure; Add Batteries

12 Battery Replacement Model SMX500RT1U SMX750RT1U SMX1500XLRT2U SMX3000XLRT2U Series # AGSMX500RT1U AGSM751SRM1U AGSM152DRTi2U AGSM4878 Input Nominal Voltage/Frequency: 230VAC/50/60Hz 230VAC50/60Hz 230VAC50/60Hz 230VAC50/60Hz Suggested Circuit: 10 amp 10 amp 10 amp 20 amp Output Capacity (VA/Watts)...