TRENDNet TC-NT2 - Manuals

TRENDNet TC-NT2 – Manual in PDF format online.

Manuals:

Manual TRENDNet TC-NT2

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 3 - To test patch cords, plug both ends of the cable to be tested

FEATURES: 1. Tests pin to pin connection of cables.2. For loop-back and remote testing.3. Auto - scan and manual step testing.4. Checks for opens shorts and cross connected wires.5. Tests Lan, Telcom, UTP/STP and coax BNC cables.6. Tone feature easily locates remote cable ends. CAUTION: NOT FOR USE ...

Page 6 - C. SENDING TONE TO IDENTIFY CABLES

B. REMOTE TEST 1. Connect one end of the test cable to theMASTER unit marked TX . 2. Set the power switch to ON and set the tester toAuto scan. The TX LED will begin to scroll insequence (1,2,3,..., shield and repeat), to indicate the pinsbeing tested. Use a patch cord (included) if the test cablete...

Page 8 - F. RODUCTION SPECIFICATION

3. RJ45 to RJ45 patch cord.4. Carrying pouch.5. User guide. E. REMARKS 1. The Master tester runs on one 9V standard or alkaline battery. 2. Please make sure the battery is fresh and have sufficient power. If a battery is weak or fails, the LED indicatorswill be dim or fail to light. The tester may n...

TRENDNet Manuals