TRENDNet TC-NT2 - Manual
TRENDNet TC-NT2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – To test patch cords, plug both ends of the cable to be tested
- Page 6 – C. SENDING TONE TO IDENTIFY CABLES
- Page 8 – F. RODUCTION SPECIFICATION
TC-NT2
TC-NT2
PROFESSIONAL
NETWORK TESTER
INSTRUCTION MANUAL
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
FEATURES: 1. Tests pin to pin connection of cables.2. For loop-back and remote testing.3. Auto - scan and manual step testing.4. Checks for opens shorts and cross connected wires.5. Tests Lan, Telcom, UTP/STP and coax BNC cables.6. Tone feature easily locates remote cable ends. CAUTION: NOT FOR USE ...
B. REMOTE TEST 1. Connect one end of the test cable to theMASTER unit marked TX . 2. Set the power switch to ON and set the tester toAuto scan. The TX LED will begin to scroll insequence (1,2,3,..., shield and repeat), to indicate the pinsbeing tested. Use a patch cord (included) if the test cablete...
3. RJ45 to RJ45 patch cord.4. Carrying pouch.5. User guide. E. REMARKS 1. The Master tester runs on one 9V standard or alkaline battery. 2. Please make sure the battery is fresh and have sufficient power. If a battery is weak or fails, the LED indicatorswill be dim or fail to light. The tester may n...
