TRENDNet TEW-P1P - Manual
TRENDNet TEW-P1P – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Back Side; Before you start the installation, you will need; One Parallel or USB printer; Print Server Installation & Setup; Wireless Network Environments
- Page 3 – Wireless Installation
- Page 4 – Choose; Install Setup Utility; , the program will automatically install the; Setup Wizard; into your computer.; Wireless Setup Wizard; to configure Wireless settings.; Click; NEXT
- Page 5 – YES
- Page 6 – In this page, you can confirm your settings again. Click; Wireless Configurations Complete.; Go back to Setup Wizard and select; Network Print Server Setup; the; Network Print Server Setup Wizard; and the following
- Page 7 – and the program will discover your wireless print server.; Next; and choose the printer you want to install.
- Page 8 – Technical Support
Page
1
Page
2
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 1 TEW-P1P/TEW-P1U Quick Installation Guide 1. Print Server Layout TEW-P1P (IEEE 1284 Parallel Connector) TEW-P1U (USB Connector) Back Side 1. Reset Button 2. Status LED (Orange) 3. WLAN LED (Green) 4. DIP Switch Nor- Normal Mode (Infrastructure) Diag-Diagnostics Mode (Ad-hoc) 5. Connector for P...
Page 3 3. Hardware Installation 1. Power off the Print Server and Printer. 2. Connect the Print Server’s printer port (USB or Parallel) to the printer. 3. Plug the AC power adapter into the power connector on the back of the print server. Note: When the print server is powered on, the status indicat...
Page 5 3. Choose Install Setup Utility , the program will automatically install the Setup Wizard into your computer. 4. After the installation completes, the Setup Wizard window would appear, Click on Wireless Setup Wizard to configure Wireless settings. In the future, you can go to Start Æ Program ...
