Page 2 - Revision History
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Revision History Document Release Date Revision Initials 1.00 Oct 31, 2008 First release A.E.F 1.01 Oct 21, 2009 Corrections A.E.F
Page 3 - The contents of this manual are based on the table below listing; Firmware Version; Notice
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 The contents of this manual are based on the table below listing firmware version, kernel version, and hardware version. If the switch functions are different from the description of the manual, ple...
Page 4 - FCC Warning; the interference by one or more of the following measures:; CE Mark Warning
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 FCC Warning This Equipment has been tested and found to comply with the limits for a Class-A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable pro...
Page 5 - Content; Chapter 1
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Content Chapter 1 Introduction......................................... 1 1.1 Hardware Features...................................... 1 1.2 Software Features ....................................... ...
Page 6 - Chapter 6
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 5.3 Login in the Console Interface................... 30 5.4 CLI Management ....................................... 32 5.5 Commands Level ...................................... 32 Chapter 6 Web-B...
Page 9 - Chapter 1 Introduction; Hardware Features; Standard
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Chapter 1 Introduction The 8 10/100TX + 2 10/100/1000T/Mini-GBIC Combo w/8 PoE Injectors Managed Industrial Switch is a cost-effective solution and meets the high reliability requirements demanded b...
Page 10 - K MAC address table
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 2 MAC Address 8K MAC address table Flash ROM 4Mbytes DRAM 32Mbytes Connector 10/100TX: 8 x RJ-45 10/100/1000T/ Mini-GBIC Combo: 2 x RJ-45 + 2 x 100/1000 SFP sockets RS-232 connector: RJ-45 type N...
Page 11 - External Power Supply: DC 48V, Redundant power DC 48V
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 3 Positive (VCC+): RJ-45 pin 1,2. Negative (VCC-): RJ-45 pin 3,6. Protocol CSMA/CD LED Per unit: Power (Green), Power 1 (Green), Power 2 (Green), Fault (Red), Master (Green), FWD (Green) 8 port 1...
Page 12 - Stability Testing
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 4 Stability Testing IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)
Page 13 - Software Features
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 5 1.2 Software Features Management SNMP v1 v2c, v3/ Web/Telnet/CLI SNMP MIB RFC 1215 Trap, RFC1213 MIBII, RFC 1157 SNMP MIB, RFC 1493 Bridge MIB, RFC 2674 VLAN MIB, RFC 1643 , RFC 1757, RSTP MIB,...
Page 16 - Package Contents; Industrial Switch x 1
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 8 1.3 Package Contents Please refer to the package content list below to verify them against the checklist. 8 10/100TX + 2 10/100/1000T/Mini-GBIC Combo w/8 PoE Injectors Managed Industrial Swit...
Page 17 - Chapter 2 Hardware Description; and wiring installation.; Physical Dimension
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Chapter 2 Hardware Description This chapter will describe the Industrial switch’s hardware spec, port, cabling information, and wiring installation. 2.1 Physical Dimension 8 10/100TX w/ X-Ring Manag...
Page 21 - Chapter 3 Hardware Installation; Installation Steps; Wall
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Chapter 3 Hardware Installation This chapter describes how to physically install the 8 10/100TX w/ X-Ring Managed Industrial Switch. 3.1 Installation Steps 1. Unpack the Industrial switch 2. Check i...
Page 24 - Wall Mount Plate Mounting; To remove the wall mount plate, reverse the above steps.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 3.3 Wall Mount Plate Mounting Follow the steps below to mount the industrial switch with wall mount plate. 1. Remove the DIN-Rail from the industrial switch; loose the screws to remove the DIN- Rail...
Page 25 - Wiring the Power Inputs; Please follow the steps below to insert the power wire.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 3.4 Wiring the Power Inputs Please follow the steps below to insert the power wire. 1. Insert AC or DC power wires into the contacts 1 and 2 for power 1, or 5 and 6 for power 2. 2. Tighten the wire-...
Page 26 - Wiring the Fault Alarm Contact; shows an application example for wiring the fault alarm contacts.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 3.5 Wiring the Fault Alarm Contact The fault alarm contacts are in the middle of the terminal block connector as the picture below shows. If configured the switch will detect power failure, or port ...
Page 27 - Note
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 3.6 Cabling Use four twisted-pair, Category 5e or above cabling for RJ-45 port connection. The cable between the switch and the link partner (switch, hub, workstation, etc.) must be less than 100 ...
Page 28 - bottom of the module.
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 20 To connect the transceiver and LC cable, please follow the steps shown below: First, insert the transceiver into the SFP module. Notice that the triangle mark is the bottom of the module. Tran...
Page 31 - Chapter 4 Network Application
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Chapter 4 Network Application This chapter illustrates some example applications. Below is a typical industrial switch application:
Page 34 - Coupling Ring Application
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 4.2 Coupling Ring Application A network may have more than one X-Ring group. The coupling ring function can connect each X-Ring for redundant backup. It can ensure transmissions between two ring gro...
Page 35 - Dual Homing Application; Ring group only has one Dual Homing port.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 4.3 Dual Homing Application The Dual Homing function prevents lost connection between an X-Ring group and an upper level/core switch. Assign two ports to be the Dual Homing ports in the X-Ring group...
Page 36 - Dual Ring Application; to be configured as the Ring Master switch to deploy the dual ring.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 4.4 Dual Ring Application Dual ring is an advanced function that supports backup connection to ensure redundant transmission. If the connection fails, the system will recover from fwithin 20 millise...
Page 37 - Chapter 5 Console Management; Connecting to the Console Port; DB9 Connector
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Chapter 5 Console Management 5.1 Connecting to the Console Port The supplied cable has an RS-232 connector on one end and an RJ-45 connector on the other end. Attach the RS-232 connector to a PC or ...
Page 38 - Login in the Console Interface
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 30 5.3 Login in the Console Interface When the connection between the Switch and the PC is ready, turn on the PC and run a terminal emulation program or Hyper Terminal and configure its communica...
Page 42 - Chapter 6 Web-Based Management; Preparing for Web Management; root
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Chapter 6 Web-Based Management This section introduces the configuration and functions of the Web-Based management. 6.1 About Web-based Management There is an embedded HTML web server residing in fl...
Page 43 - Launch the Internet Explorer on the PC; Enter; The login screen will appear right after; or click the; OK; button. Then the home screen of the Web-based
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 35 6.3 System Login 1. Launch the Internet Explorer on the PC 2. Key in “http:// “+” the IP address of the switch”, and then Press “ Enter ”. 3. The login screen will appear right after 4. Key in...
Page 44 - System Information
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 36 6.4 System Information Users can assign the system name, description, location and contact personnel to identify the switch. The version table below is a read-only field to show the basic info...
Page 45 - IP Configuration
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.5 IP Configuration The switch is a network device which needs to be assigned an IP address for being identified on the network. Users have to decide a means of assigning IP address to the switch. ...
Page 47 - function, the switch system will be configured as a DHCP server.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.6 DHCP Server DHCP is the abbreviation of Dynamic Host Configuration Protocol that is a protocol for assigning dynamic IP addresses to devices on a network. With dynamic addressing, a device can h...
Page 48 - configuration
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.6.1 System configuration DHCP Server: Enable or Disable the DHCP Server function. Enable—the switch will be the DHCP server on your local network. Low IP Address: Type in an IP address. Low IP...
Page 49 - Entries; the IP assigning type, status and lease time.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.6.2 Client Entries When the DHCP server function is enabled, the system will collect the DHCP client information including the assigned IP address, the MAC address of the client device, the IP ass...
Page 50 - bound with the port.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.6.3 Port and IP Bindings Assign the dynamic IP address bound with the port to the connected client. The user is allowed to fill each port column with one particular IP address. When the device is ...
Page 51 - firmware image is located on the TFTP server.; Firmware; TFTP Server IP Address:; Type in your TFTP server IP.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.7 TFTP TFTP allows the user to update the switch firmware via the Trivial File Transfer Protocol (TFTP) server. Before updating, make sure the TFTP server is ready and the firmware image is locate...
Page 52 - Configuration; Type in the TFTP server IP.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.7.2 Restore Configuration You can restore a previous backup configuration from the TFTP server to recover the settings. Before doing so, you must locate the image file on the TFTP server. TFTP S...
Page 54 - System Event Log; Event Configuration; Client Only
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.8 System Event Log This page allows the user to decide whether to send the system event log, and select the mode which the system event log will be sent to client only, server only, or both client...
Page 56 - System Event Log—SMTP Configuration; Email Alert; johnadmin
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.8.2 System Event Log—SMTP Configuration Simple Mail Transfer Protocol (SMTP) is the standard for email transmissions across the network. You can configure the SMTP server IP, mail subject, sender,...
Page 58 - System Event Log—Event Configuration
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.8.3 System Event Log—Event Configuration Having ticked the Syslog / SMTP checkboxes, the event log/email alert will be sent to the system log server and the SMTP server respectively. Also, Port ev...
Page 60 - Fault Relay Alarm; Please refer to the section, ‘; Wiring the Fault Alarm Contact; Tick the check box to enable the function of lighting up the; LED on the panel when power fails.; FAULT; LED on the panel when Ports’ states are link down or broken.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.9 Fault Relay Alarm The Fault Relay Alarm function provides Power Failure and Port Link Down/Broken detection. With both power input 1 and power input 2 installed and the check boxes of power 1/po...
Page 61 - Daylight Saving Time:
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.10 SNTP Configuration SNTP (Simple Network Time Protocol) is a simplified version of NTP which is an Internet protocol used to synchronize the clocks of computers to some time reference. Because t...
Page 63 - Daylight Saving Period:
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 55 CCT - China Coast, USSR Zone 7 +8 hours 8 pm JST - Japan Standard, USSR Zone 8 +9 hours 9 pm EAST - East Australian Standard GST Guam Standard, USSR Zone 9 +10 hours 10 pm IDLE - International...
Page 65 - Security
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.11 IP Security IP security allows the user to assign 10 specific IP addresses that have permission to manage the switch through the http and telnet services. The purpose of providing limited IP ad...
Page 67 - Authentication; Type in the new user name (The default is ‘root’)
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.12 User Authentication Change web management login user name and password for the management security issue. User name: Type in the new user name (The default is ‘root’) Password: Type in the ...
Page 68 - Statistics; Up
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.13 Port Statistics The following chart provides the current statistic information which displays the real-time packet transfer status for each port. The user might use the information to plan and ...
Page 70 - Control; On
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.14 Port Control In Port control you can configure the settings of each port to control the connection parameters, and the status of each port is listed beneath. Port: Use the scroll bar and clic...
Page 72 - Trunk; Group ID
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.15 Port Trunk Port trunking is the combination of several ports or network cables to expand the connection speed beyond the limits of any one single port or network cable. Link Aggregation Control...
Page 73 - State Activity
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 65 ports to be aggregated in a trunk group. Click Add and the ports focused in the right side will be shifted to the left side. To remove unwanted ports, select the ports and click Remove . Whe...
Page 74 - LACP disabled; trunk group information on the tab of; Aggregator Information; This is a read-only column field that displays the trunk group ID.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.15.2 Aggregator Information z LACP disabled Having set up the aggregator setting with LACP disabled, you will see the local static trunk group information on the tab of Aggregator Information . As...
Page 75 - This is a read-only column field that displays the members of this
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 67 Port Member: This is a read-only column field that displays the members of this static trunk group.
Page 76 - LACP enabled; group information between two switches on the tab of
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 z LACP enabled Having set up the aggregator setting with LACP enabled, you will see the trunking group information between two switches on the tab of Aggregator Information . Switch 1 configuratio...
Page 77 - Click on the tab of; to check the trunked group
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 69 Aggregation Information of Switch 1 5. Click on the tab of Aggregator Information to check the trunked group information as the illustration shown above after the two switches configured.
Page 78 - Switch 2 configuration; System Priority; Include the member ports by clicking the; button after selecting the port; Work Ports; changes automatically.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Switch 2 configuration Switch 2 configuration interface 1. Set System Priority of the trunk group. The default is 1. 2. Select a trunk group ID by pull down the drop-down menu bar. 3. Enable LACP....
Page 80 - , the port state activity will change to; Passive; The port automatically sends LACP protocol packets.; A link; having two passive LACP nodes will not perform dynamic LACP
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.15.3 State Activity Having set up the LACP aggregator on the tab of Aggregator Setting, you can configure the state activity for the members of the LACP trunk group. You can tick or cancel the che...
Page 82 - Mirroring; There is only one port can be selected to be destination (mirror); RX; or; TX; check boxes to be monitored.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.16 Port Mirroring Port mirroring is a method for monitoring traffic in switched networks. Traffic through ports can be monitored by one specific port, which means traffic that goes in or out monit...
Page 83 - Limiting; select the frame type that wants to filter. There are four; specified rate
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.17 Rate Limiting You can set up every port’s bandwidth rate and frame limitation type. Ingress Limit Frame type: select the frame type that wants to filter. There are four frame types for select...
Page 84 - Enter the port effective ingress rate (The default value is “0”).; to apply the settings
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 76 ¾ Ingress: Enter the port effective ingress rate (The default value is “0”). ¾ Egress: Enter the port effective egress rate (The default value is “0”). And then, click Apply to apply the set...
Page 85 - This switch supports; Disable
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.18 VLAN configuration A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain, which allows you to isolate network traffic. Only the members of the same VLAN will recei...
Page 86 - Pull down the selection item and focus on; then press; to set; Port Based; Click
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.18.1 Port-based VLAN A port-based VLAN basically consists of its members—ports, which means the VLAN is created by grouping the selected ports. This method provides convenience for users to config...
Page 87 - in the right field from the VLAN.; to have the configuration take effect.
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 79 VLAN—Port Based Add interface Enter the group name and VLAN ID. Add the selected port number into the right field to group these members to be a VLAN group, or remove any of them listed in t...
Page 89 - create different broadcast domains.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.18.2 802.1Q VLAN Virtual Local Area Network (VLAN) can be implemented on the switch to logically create different broadcast domains. When the 802.1Q VLAN function is enabled, all ports on the swit...
Page 90 - Enable GVRP Protocol:; column field of Tagged VID is not available.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 802.1Q Configuration Pull down the selection item and focus on 802.1Q, then press Apply to set the VLAN Operation Mode in 802.1Q mode. Enable GVRP Protocol: GVRP (GARP VLAN Registration Protocol...
Page 91 - VID column field is not available.
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 83 aware devices (switches). A Trunk Port, connected to the trunk link, has an understanding of tagged frame, which is used for the communication among VLANs across switches. Which frames of the ...
Page 92 - Group Configuration; Edit the existing VLAN Group.
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 84 802.1Q VLAN interface Group Configuration Edit the existing VLAN Group. Select the VLAN group in the table list. Click Edit .
Page 93 - You can modify the VLAN group name and VLAN ID.
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 85 Group Configuration interface You can modify the VLAN group name and VLAN ID. Group Configuration interface
Page 95 - Spanning
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.19 Rapid Spanning Tree The Rapid Spanning Tree Protocol (RSTP) is an evolution of the Spanning Tree Protocol and provides for faster spanning tree convergence after a topology change. The system a...
Page 97 - True
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.19.2 Port Configuration This web page provides the port configuration interface for RSTP. You can assign higher or lower priority to each port. Rapid spanning tree will have the port with the high...
Page 99 - Community Strings
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.20 SNMP Configuration Simple Network Management Protocol (SNMP) is the protocol developed to manage nodes (servers, workstations, routers, switches and hubs etc.) on an IP network. SNMP enables ne...
Page 103 - Access Table
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 95 SNMP V3 configuration interface Access Table Configure SNMP v3 access table. Context Prefix: set up the context name. Group Name: set up the group. Security Level: select the access leve...
Page 104 - MIBview Table
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 96 Notify View Name: set up the notify view. Click Add to add context name. Click Remove to remove unwanted context name. MIBview Table Configure MIB view table. ViewName: set up the name...
Page 106 - Priority
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 98 QoS Configuration interface 6.21.2 Port-based Priority Configure the priority level for each port. With the drop-down selection item of Priority Type above being selected as Port-based, this c...
Page 107 - Priority Type
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 99 the queuing policy for each port. Port x: Each port has 4 priority levels—High, Middle, Low, and Lowest—to be chosen. Click Apply to have the configuration take effect. 6.21.3 COS Configur...
Page 111 - Ring Port
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 103 the 2 nd Ring Port to be the working port. Enable Couple Ring: To enable the couple ring function, tick the checkbox beside the Enable Couple Ring string label. ¾ Couple Port: Assign the me...
Page 112 - configuration will lose when switch powers off.
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 104 [NOTE] 1. When the X-Ring function enabled, the user must disable the RSTP. The X-Ring function and RSTP function cannot exist on a switch at the same time. 2. Remember to execute the “Save C...
Page 113 - LLDP Protocol; : Pull down the selection menu to disable or enable LLDP function.; LLDP Interval
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.24 LLDP Configuration Link Layer Discovery Protocol (LLDP) is defined in the IEEE 802.1AB, it is an emerging standard which provides a solution for the configuration issues caused by expanding LAN...
Page 116 - The specified port is required to be held in the authorized state.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.25.2 Port Configuration You can configure the 802.1x authentication state for each port. The state provides Disable, Accept, Reject, and Authorize. Reject: The specified port is required to be h...
Page 118 - MAC Address Table; Add the Static MAC Address
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.26 MAC Address Table Use the MAC address table to ensure the port security. 6.26.1 Static MAC Address You can add a static MAC address that remains in the switch's address table regardless of whet...
Page 120 - Enter the MAC address that you want to filter.; address and click
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.26.2 MAC Filtering By filtering MAC address, the switch can easily filter the pre-configured MAC address and reduce the un-safety. You can add and delete filtering MAC address. MAC Filtering inter...
Page 121 - You can view all of the MAC addresses learned by the selected port.; to clear the dynamic MAC addresses information of the
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.26.3 All MAC Addresses You can view all of the MAC addresses learned by the selected port. Select the port number. The selected port of static & dynamic MAC address information will be dis...
Page 122 - MAC Address Table—Multicast Filtering; the registered end stations.; IP Address; : Tick the check box beside the port number to include them as the; field and click
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.26.4 MAC Address Table—Multicast Filtering Multicasts are similar to broadcasts, they are sent to all end stations on a LAN or VLAN. Multicast filtering is the function, which end stations can rec...
Page 123 - over; Maximum Power Available:
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.27 Power over Ethernet This segment shows the Power over Ethernet function. PoE Status Maximum Power Available: Displays the maximum power supply in Watt. Actual Power Consumption: This column...
Page 124 - Capacitive Detection:; Classification
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 116 a certain period (for details, see the IEEE 802.3af specification). Capacitive Detection: If the port and capacitive detection are enabled, the capacitances state reads in the voltage resul...
Page 125 - Reset switch to default configuration. Click; to reset all configurations to the
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.28 Factory Default Reset switch to default configuration. Click Default to reset all configurations to the default value. Factory Default interface
Page 126 - configuration will be saved. Click; to save the all configuration to the flash
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.29 Save Configuration Save all configurations that you have made in the system. To ensure the all configuration will be saved. Click Save Flash to save the all configuration to the flash memory. S...
Page 127 - Reboot the switch in software reset. Click; to reboot the system.
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6.30 System Reboot Reboot the switch in software reset. Click Reboot to reboot the system. System Reboot interface
Page 128 - Troubles shooting; Diagnosing LED Indicators:
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Troubles shooting Verify that is using the right power cord/adapter (DC 24-48V), please don’t use the power adapter with DC output higher than 48V, or it may damage this device. Select the prope...
Page 129 - Appendix A—RJ-45 Pin Assignment; through and crossover cable schematic.; RJ-45 Pin Assignments
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Appendix A—RJ-45 Pin Assignment RJ-45 Pin Assignments The UTP/STP ports will automatically sense for Fast Ethernet (10Base-T/100Base-TX connections), or Gigabit Ethernet (10Base-T/100Base-TX/1000Bas...
Page 130 - The following two figures show the 10/100Base-TX cable schematic.
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 122 10/100Base-TX Cable Schematic The following two figures show the 10/100Base-TX cable schematic. Straight-through cable schematic Cross over cable schematic 10/100/1000Base-TX Pin outs The...
Page 132 - RJ-45 Pin Assignment of PoE; Pin out of Cisco non-802.3af standard PD
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 124 RJ-45 Pin Assignment of PoE With 100BASE-TX/10BASE-T cable, pins 1 and 2 are used for transmitting data, and pins 3 and 6 for receiving data; pins 4, 5, 7 and 8 are used for power supplying. ...
Page 133 - Pin out of PoE Endspan Hub/Switch
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 125 Pin out of PoE Endspan Hub/Switch Pin Signal / Name 1 TX+/VCC+ 2 TX-/VCC+ 3 TX+/VCC- 4 5 6 TX-/VCC- 7 8 Note ‘+’ and ‘-‘ signs represent the polarity of the wires that make up each wire pai...
Page 134 - Appendix B—Command Sets; Commands Set List; System Commands Set
Transition Networks SISPM1040-182D Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Appendix B—Command Sets Commands Set List User EXEC E Privileged EXEC P Global configuration G VLAN database V Interface configuration I System Commands Set Commands Level Description Example show c...
Page 136 - Port Commands Set
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 128 ipbinding 192.168.1.1 show dhcpserver configuration P Show configuration of DHCP server switch# show dhcpserver configuration show dhcpserver clients P Show client entries of DHCP server swit...
Page 139 - Trunk Commands Set
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 131 form of this command to disable the port. show interface configuration I show interface configuration status switch(config)# interface fastEthernet 2 switch(config-if)# show interface configu...
Page 140 - VLAN Commands Set
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 132 list separate by a comma(ex.2, 3, 6) [Workport]: The amount of work ports, this value could not be less than zero or be large than the amount of member ports. aggregator group [GroupID] [Port...
Page 141 - vlanmode gvrp; no vlan group 2
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 133 [portbase| 802.1q | gvrp] mode. or switch(vlan)# vlanmode 802.1q or switch(vlan)# vlanmode gvrp no vlan V No VLAN Switch(vlan)# no vlan Ported based VLAN configuration vlan port-based grpname...
Page 142 - Spanning Tree Commands Set; Commands
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 134 can’t be applied. trunk-link tag 3-20 vlan 8021q port [PortNumber] hybrid-link untag [UntaggedVID] tag [TaggedVID List] V Assign a hybrid link for VLAN by port, if the port belong to a trunk ...
Page 143 - time
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 135 configuration command to change the interval between messages the spanning tree receives from the root switch. If a switch does not receive a bridge protocol data unit (BPDU) message from the...
Page 145 - QOS Commands Set
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 137 interface. switch(config-if)# stp-admin-edge True stp-admin-non-stp [True|False] I Admin NonSTP of STP priority on this interface. switch(config)# interface fastEthernet 2 switch(config-if)# ...
Page 146 - IGMP Commands Set
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 138 IGMP Commands Set Commands Level Description Example igmp enable G Enable IGMP snooping function switch(config)# igmp enable Igmp-query auto G Set IGMP query to auto mode switch(config)# Igmp...
Page 147 - SNMP Commands Set
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 139 show mac-address-table static P Show static MAC address table switch# show mac-address-table static show mac-address-table filter P Show filter MAC address table. switch# show mac-address-tab...
Page 150 - Port Mirroring Commands Set
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 142 Port Mirroring Commands Set Commands Level Description Example monitor [RX|TX|Both] I Configure source port of monitor function switch(config)# interface fastEthernet 2 switch(config-if)# mon...
Page 151 - accountport
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 143 [port ID] system server port global configuration command to change the radius server port serverport 1812 8021x system accountport [port ID] G Use the 802.1x system account port global confi...
Page 152 - servertimeout
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 144 configuration command to set the supplicant timeout. 8021x misc servertimeout [sec.] G Use the 802.1x misc server timeout global configuration command to set the server timeout. switch(config...
Page 153 - TFTP Commands Set
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 145 TFTP Commands Set Commands Level Description Defaults Example backup flash:backup_cfg G Save configuration to TFTP and need to specify the IP of TFTP server and the file name of image. switch...
Page 155 - SNTP Commands Set
Transition Networks SISPM1040-182D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 147 no event authentication- failure G Disable Authentication failure event typ switch(config)# no event authentication-failure no event ring-topology- change G Disable X-ring topology changed ev...
Transition Networks E-TX-FX-0600
Manual
Transition Networks CETTF10XX-200
Manual
Transition Networks J/E-CX-TBT-01
Manual
Transition Networks SSDTF1013-100
Manual
Transition Networks CPSMP-130
Manual
Transition Networks RS-449
Manual
Transition Networks DVP 5960
Manual
Transition Networks C4TEF10XX-10X
Manual
Transition Networks RS-232-TO-100BASE-FX
Manual
Transition Networks SSDTF1029-106
Manual
Transition Networks E-100BTX-FRL-01(SC)
Manual
Transition Networks DVP 5140K
Manual
Transition Networks E-MCC-PS48
Manual
Transition Networks CPSMC0100-210
Manual
Transition Networks MGE-PSW-SX-01
Manual