Transition Networks E-100BTX-FX-05 - Manual
Transition Networks E-100BTX-FX-05 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation; AutoCrossTM Jumper
- Page 3 – Installing the fiber cable; Power the media converter; AC; Operation; Status LEDs
- Page 4 – Pause Control; Standard models
- Page 5 – Fiber cable; Extended temperature models; Cable Specifications; Copper cable; Technical Specifications
- Page 6 – Troubleshooting; Contact Us
- Page 7 – Compliance Information
User’s Guide
E-100BTX-FX-05
Stand-Alone Media Converter
•
Fast Ethernet
• Copper to Fiber
• 100Base-TX to 100Base-FX
• Extended Temperature
Transition Networks E-100BTX-FX-05 Fast
Ethernet media converter connects 100Base-
TX shielded or unshielded twisted-pair
copper cable to 100Base-FX fiber-optic cable. The E-100BTX-FX-05 series of media
converters include both standard temperature models
(listed below)
and extended
temperature model.
Standard Temperature Models: 0°C to 50°C
(32°F to 122°F)
* Typical maximum cable distance.
Actual distance is dependent upon the
physical characteristics of the network
installation.
Installation . . . . . . . . . . . . . . . . . .3
Operation . . . . . . . . . . . . . . . . . . .5
Cable Specifications . . . . . . . . . . .7
Technical Specifications . . . . . . . .9
Troubleshooting . . . . . . . . . . . . .10
Contact Us . . . . . . . . . . . . . . . . .11
Compliance Information . . . . . . .12
Part Number
Port One - Copper
100Base-TX
Port Two - Duplex Fiber-Optic
100Base-FX
E-100BTX-FX-05
RJ-45
100 m
(328 ft)*
ST, 1300 nm multimode
2 km
(1.2 miles)*
E-100BTX-FX-05(SC)
RJ-45
100 m
(328 ft)*
SC, 1300 nm multimode
2 km
(1.2 miles)*
E-100BTX-FX-05(LC)
RJ-45
100 m
(328 ft)*
LC, 1300 nm multimode
2 km
(1.2 miles)*
E-100BTX-FX-05(MT)
RJ-45
100 m
(328 ft)*
MT-RJ, 1300 nm multimode
2 km
(1.2 miles)*
E-100BTX-FX-05(SM)
RJ-45
100 m
(328 ft)*
SC, 1310 nm single mode
20 km
(12.4 miles)*
E-100BTX-FX-05(SMLC)
RJ-45
100 m
(328 ft)*
LC, 1310 nm single mode
20 km
(12.4 miles)*
E-100BTX-FX-05(LH)
RJ-45
100 m (
328 ft)*
SC, 1310 nm single mode
40 km
(24.9 miles)*
E-100BTX-FX-05(XL)
RJ-45
100 m
(328 ft)*
SC, 1310 nm single mode
60 km
(37.3 miles)*
E-100BTX-FX-05(LW)
RJ-45
100 m
(328 ft)*
SC, 1550 nm single mode
80 km
(49.7 miles)*
E-100BTX-FX-05(XLW)
RJ-45
100 m
(328 ft)*
SC, 1550 nm single mode
120 km
(74.56 miles)*
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 E-100BTX-FX-05 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 The media converters with the “HT” extension in the part number can be used inan extended temperature environment from -25°C to 65°C (-13°F to 149°F). Part Number Description SPS-1872-SA Optional External ...
4 E-100BTX-FX-05 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued Installing the fiber cable 1. Locate a 100Base-FX compliant fiber cable with male, two-stranded TX toRX connectors installed at both ends. 2. Connect the fiber cables to the media...
6 E-100BTX-FX-05 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Operation -- Continued Pause Control The Pause feature can improve network performance by allowing one end ofthe link to signal the other to discontinue frame transmission for a set periodof time to reliev...
