Transition Networks SBFTF10XX-10X - Manual
Transition Networks SBFTF10XX-10X – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Copper; Set the Configuration Switches; Installation; Set the Configuration Switches - Continued
- Page 3 – Connect the Twisted-Pair Copper Cable; Connect the Fiber Cable; Power the Media Converter
- Page 4 – Using the Status LEDs; fiber port; Speed LED; Operation; Product Features; Rate Conversion; disable; AutoCrossTM
- Page 5 – Distance Extension; Optional Accessories; cross over
- Page 6 – 00Base-TX Fiber Example; collision domain; Cable Specifications; Fiber Cable
- Page 7 – Copper Cable; Technical Specifications; YES
- Page 8 – Troubleshooting; Check the fiber cables for proper connection.; Check the copper cables for proper connection.; Compliance Information; FCC Regulations; VCCI Class 1 Compliance
- Page 9 – Contact Us; and click the
Installation . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . .6
Half-Duplex Network . . . . . . . . . .9
Cable Specifications . . . . . . . . . .11
Technical Specifications . . . . . . .13
Troubleshooting . . . . . . . . . . . . .13
Compliance Information . . . . . . .15
Contact Us . . . . . . . . . . . . . . . . .16
Part Number
Port One -
Copper
10Base-T/100Base-TX
Port Two -
Duplex Fiber-Optic
100Base-FX
SBFTF1011-100
RJ-45
100 m (328 ft)*
ST, 1300 nm multimode
2 km (1.2 miles)*
SBFTF1019-100
RJ-45
100 m (328 ft)*
LC, 1310 nm single mode
20 km (12.4 miles*
SBFTF1013-100
RJ-45
100 m (328 ft)*
SC, 1300 nm multimode
2 km (1.2 miles)*
SBFTF1014-100
RJ-45
100 m (328 ft)*
SC, 1310 nm single mode
20 km (12.4 miles)*
SBFTF1015-100
(long haul)
RJ-45
100 m (328 ft)*
SC, 1310 nm single mode
40 km (24.8 miles)*
SBFTF1016-100
(extra long haul)
RJ-45
100 m (328 ft)*
SC, 1310 nm single mode
60 km (37.2 miles)*
SBFTF1017-100
(long wave length)
RJ-45
100 m (328 ft)*
SC, 1550 nm single mode
80 km (49.7 miles)*
SBFTF1018-100
RJ-45
100 m (328 ft)*
MT-RJ, 1300 nm multimode
2 km (1.2 miles)*
User’s Guide
SBFTF10xx-10x
Stand Alone Media Converter
•
Copper to Fiber
•
10/100 Bridging (2-Port)
•
10/100Base-TX to 100Base-FX
The SBFTF10xx-10x 2-port Ethernet/fast Ethernet
bridging media converter connects 10Base-T
Ethernet or 100Base-TX fast Ethernet twisted-pair
copper network devices to network devices on a
100Base-FX fast Ethernet fiber network.
*Typical maximum cable distance. Actual distance is dependent upon the
physical characteristics of the network installation.
The
chassis version
of the media converter
is CBFTF10xx-10x. For more information,
see the CBFTF10xx-10x user’s guide on-
line at: www.transition.com.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 SBFTF10xx-10x 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Part Number Port One - Copper Port Two - Simplex Fiber-Optic SBFTF1029-100 ** RJ-45100 m (328 ft)* SC, 1310 nm (TX)/1550 nm (RX)single mode, 20 km (12.4 miles)* SBFTF1029-101 ** RJ-45100 m (328 ft)* SC, 155...
4 SBFTF10xx-10x 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued Connect the Twisted-Pair Copper Cable Ensure that the correct cable type is installed to support the highest speed andmode of operation to be selected. Although Category 3 cable is...
6 SBFTF10xx-10x 24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Operation Using the Status LEDs U s e t h e s t a t u s L E D s t o m o n i t o r t h e m e d i a c o n v e r t e r a n d t h e n e t w o r kconnections. The “FD” and “LACT” LEDs refer to the fiber port . F...
