Transition Networks SISGM1040-162D - Manuals

Page 2 - The contents of this manual are based on the table below listing; Firmware Version; Notice

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 1 The contents of this manual are based on the table below listing firmware version, software kernel version, and hardware version. If the switch functions are different from the description of t...

Page 3 - FCC Warning; the interference by one or more of the following measures:; CE Mark Warning

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 I FCC Warning This Equipment has been tested and found to comply with the limits for a Class-A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonabl...

Page 4 - Content

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 1 Content Introduction................................................................ 1 Benefits .................................................................... 1 Package Contents.............

Page 8 - Introduction; Benefits

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 1 Introduction The 6 10/100/1000T + 2 10/100/1000T/ 100/1000 SFP Combo w/ X-Ring Managed Switch is a cost-effective solution and meets the high reliability requirements demanded by industrial app...

Page 10 - Package Contents; Switch

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 3 Package Contents Please refer to the package content list below to verify them against the checklist. 6 10/100/1000T + 2 10/100/1000T/ 100/1000 SFP Combo w/ X-Ring Managed Switch User manual RS...

Page 11 - Hardware Description; and wiring installation.; Physical Dimension

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 4 Hardware Description This section describes the Industrial switch’s hardware spec, port, cabling information, and wiring installation. Physical Dimension 6 10/100/1000T + 2 10/100/1000T/ 100/10...

Page 12 - Top View; LED Indicators; LED

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 5 Top View The top panel of the 6 10/100/1000T + 2 10/100/1000T/ 100/1000 SFP Combo w/ X- Ring Managed Switch has one terminal block connector for two DC power inputs. Top Panel of the industrial...

Page 13 - Fault

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 6 Off Power input 1 is inactive Green Power input 2 is active PWR2 Off Power input 2 is inactive Red Power input 1 or 2 is inactive or port link failure (depends on Fault Relay Alarm configuratio...

Page 14 - Wiring the Power Inputs; Please follow the steps below to insert the power wire.

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 7 Wiring the Power Inputs Please follow the steps below to insert the power wire. Insert the positive and negative wires into the V+ and V- contacts on the terminal block connector. Tighten the w...

Page 15 - Wiring the Fault Alarm Contact; application example for wiring the fault alarm contacts.

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 8 Wiring the Fault Alarm Contact The fault alarm contacts are in the middle of the terminal block connector as the picture shows below. The switch will provide local indication of a power or port...

Page 16 - Mounting Installation; the steps below to hang the industrial switch.

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 9 Mounting Installation DIN-Rail Mounting The DIN-Rail is installed on the industrial switch at the factory. If the DIN-Rail is not installed, please see the following pictures to screw the DIN-R...

Page 18 - Wall Mount Plate Mounting; To remove the wall mount plate, reverse the steps above.

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 11 Wall Mount Plate Mounting Follow the steps below to mount the industrial switch with a wall mount plate. 1. Remove the DIN-Rail from the industrial switch; loose the screws to remove the DIN- ...

Page 19 - Hardware Installation; Installation Steps; Wall Mount Plate Mounting

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 12 Hardware Installation This section describes how to physically install the 6 10/100/1000T + 2 10/100/1000T/ 100/1000 SFP Combo w/ X-Ring Managed Switch. Installation Steps 1. Unpack the Indust...

Page 20 - Network Application; the industrial switch is shown as below:

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 13 Network Application This section provides some sample applications to guide users. A sample application of the industrial switch is shown as below:

Page 21 - algorithm is similar to Spanning Tree Protocol (STP)/RSTP

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 14 X-Ring Application The industrial switch supports the X-Ring protocol that can help the network recover from a connection failure within 300ms or less, ensuring network reliability. The X-Ring...

Page 22 - Coupling Ring Application

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 15 Coupling Ring Application In the network, there may be more than one X-Ring group. The coupling ring function can connect each X-Ring for redundant backup. It can ensure transmissions between ...

Page 23 - Dual Homing Application; function is active. Each X-Ring group has only one Dual Homing port.

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 16 Dual Homing Application Dual Homing is a function to prevent the connection breaking between an X-Ring group and an upper level/core switch. Assign two ports to be the Dual Homing port that is...

Page 24 - Console Management; Connecting to the Console Port; DB9 Connector RJ-45 Connector

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 17 Console Management Connecting to the Console Port The supplied cable has an RS-232 connector on one end and an RJ-45 connector on the other. Attach the end with the RS-232 connector to a PC or...

Page 25 - Login in the Console Interface

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 18 Login in the Console Interface When the connection between Switch and PC is ready, turn on the PC and run a terminal emulation program or Hyper Terminal and configure its communication paramet...

Page 26 - CLI Management; enter CLI management interface, enter “

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 19 Console login interface CLI Management The system supports a command line interface management–CLI. After you have logged in the system by typing in user name and password, you will see a comm...

Page 27 - Commands Level

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 20 The following table lists the CLI commands and description. Commands Level Modes Access Method Prompt Exit Method About This Mode1 User EXEC Begin a session with your switch. switch> Enter ...

Page 28 - Commands Set List; show config

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 21 EXEC mode. Interface configuratio n Enter the interface command (with a specific interface) while in global configuration mode switch (config-if)# To exit to global configuratio n mode, enter ...

Page 31 - Port Commands Set

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 24 no security G Disable IP security function switch(config)# no security no security http G Disable IP security of HTTP server switch(config)# no security http no security telnet G Disable IP se...

Page 34 - Trunk Commands Set

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 27 Trunk Commands Set Command Level Description Example aggregator priority [1~65535] G Set port group system priority switch(config)# aggregator priority 22 aggregator activityport [Group ID] [P...

Page 35 - VLAN Commands Set; or

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 28 show aggregator P Show the information of trunk group switch# show aggregator 1 or switch# show aggregator 2 or switch# show aggregator 3 no aggregator lacp [GroupID] G Disable the LACP functi...

Page 36 - vid

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 29 IEEE 802.1Q VLAN vlan 8021q name [GroupName] vid [VID] V Change the name of VLAN group, if the group didn’t exist, this command can’t be applied. switch(vlan)# vlan 8021q name test vid 22 vlan...

Page 37 - show vlan; Spanning Tree Commands Set; Command

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 30 [TaggedVID List] switch(vlan)# vlan 8021q trunk 3 hybrid-link untag 5 tag 6-8 show vlan [GroupID] or show vlan V Show VLAN information switch(vlan)# show vlan 23 no vlan group [GroupID] V Dele...

Page 38 - time

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 31 spanning-tree hello- time [seconds] G Use the spanning-tree hello-time global configuration command to specify the interval between hello bridge protocol data units (BPDUs). switch(config)# sp...

Page 39 - show spanning-tree; QOS Commands Set; qos policy

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 32 into the forwarding state. stp-path-priority [Port Priority] I Use the spanning-tree port-priority interface configuration command to configure a port priority that is used when two switches t...

Page 40 - IGMP Commands Set

Page 41 - Mac / Filter Table Commands Set

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 34 no igmp-query G Disable IGMP query switch# no igmp-query Mac / Filter Table Commands Set Command Level Description Example mac-address-table static hwaddr [MAC] I Configure MAC address table o...

Page 44 - Port Mirroring Commands Set

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 37 match-rule [Exact|Prifix] views [Read View Name] [Write View Name] [Notify View Name] no snmpv3 mibview view [View Name] type [Excluded|Included] sub-oid [OID] G Remove specified mibview table...

Page 45 - no monitor

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 38 switch(config-if)# no monitor 802.1x Commands Set Command Level Description Example 8021x enable G Use the 802.1x global configuration command to enable 802.1x protocols. switch(config)# 8021x...

Page 46 - quietperiod 10

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 39 the NAS ID 8021x misc quietperiod [sec.] G Use the 802.1x misc quiet period global configuration command to specify the quiet period value of the switch. switch(config)# 8021x misc quietperiod...

Page 47 - portstate; TFTP Commands Set; backup

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 40 8021x portstate [disable | reject | accept | authorize] I Use the 802.1x port state interface configuration command to set the state of the selected port. switch(config)# interface fastetherne...

Page 48 - SystemLog, SMTP and Event Commands Set

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 41 SystemLog, SMTP and Event Commands Set Command Level Description Example systemlog ip [IP address] G Set System log server IP address. switch(config)# systemlog ip 192.168.1.100 systemlog mode...

Page 49 - SNTP Commands Set

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 42 [Systemlog|SMTP|Both] event ring-topology- change [Systemlog|SMTP|Both] G Set X-ring topology changed event type switch(config)# event ring- topology-change both event systemlog [Link-UP|Link-...

Page 52 - Web-Based Management; About Web-based Management; and presenting an easy viewing screen.; Preparing for Web Management; username and password are as follows:

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 45 Web-Based Management This section introduces the configuration and functions of the Web-Based management. About Web-based Management On the CPU board of the switch there is an embedded HTML we...

Page 53 - System Login; Launch the Internet Explorer on the PC

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 46 System Login 1. Launch the Internet Explorer on the PC 2. Key in “http:// “+” the IP address of the switch”, and then Press “ Enter ”. 3. The login screen will appear right after 4. Key in the...

Page 54 - Main Page

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 47 Main Page The home page of the Web-based screen mainly consists of a treeview control item. For more details about each function, please click the ‘+’ symbol of each node to expand the tree st...

Page 55 - System Information

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 48 System Information Assign the system name, location and view the system information. System Name: Assign the name of switch. The maximum length is 64 bytes. System Description: Displays the de...

Page 56 - IP Configuration

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 49 IP Configuration User can configure the IP Settings and DHCP client function DHCP Client: Enable or disable the DHCP client function. When DHCP client function is enabled, the industrial switc...

Page 57 - DHCP Server—System configuration

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 50 DHCP Server—System configuration The system provides the DHCP server function. Enable the DHCP server function, the switch system will be a DHCP server. DHCP Server: Enable or Disable the DHCP...

Page 58 - DHCP Client—Client Entries; information and display it here.

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 51 DHCP Client—Client Entries When the DHCP server function is active, the system will collect the DHCP client information and display it here. DHCP Client Entries interface

Page 59 - DHCP Server—Port and IP Bindings

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 52 DHCP Server—Port and IP Bindings You can assign the specific IP address that is the IP in the dynamic IP assign range to the specific port. When the device is connected to the port and asks fo...

Page 60 - TFTP—Update Firmware; TFTP Server IP Address:

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 53 TFTP—Update Firmware TFTP allows the user to update the switch firmware remotely, via the network. Before updating, make sure you have your TFTP server ready and the firmware image is on the T...

Page 61 - TFTP—Restore Configuration

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 54 TFTP—Restore Configuration You can restore the switch configuration from the TFTP server, but you must put the image file on TFTP server first. The switch will then download the flash image. 1...

Page 62 - TFTP—Backup Configuration

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 55 TFTP—Backup Configuration You can save the current switch configuration from the switch to TFTP server, then go to the TFTP restore configuration page to restore the switch configuration. 1. T...

Page 63 - System Event Log—Syslog Configuration; Select the system log mode – client only, server only, or both; to refresh the events log.; to clear all current events log.

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 56 System Event Log—Syslog Configuration Configure the system events that you want to record and the system log server IP. 1. Syslog Client Mode: Select the system log mode – client only, server ...

Page 64 - System Event Log—SMTP Configuration; Email Alert

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 57 System Event Log—SMTP Configuration You can set up the mail server IP, mail account, account password, and forwarded email account for receiving the event alert. 1. Email Alert: enable or disa...

Page 66 - System Event Log—Event Configuration; System event selection:

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 59 System Event Log—Event Configuration You can select the system log events and SMTP events. When selected events occur, the system will send out the log information. Also, per port log and SMTP...

Page 68 - Fault Relay Alarm

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 61 Fault Relay Alarm The Fault Relay Alarm function provides the mechanism for warning when power or port faults are detected. There is a set of relay contacts in the switch, and the contacts are...

Page 69 - SNTP Configuration; Daylight Saving Time:

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 62 SNTP Configuration You can configure the SNTP (Simple Network Time Protocol) settings. The SNTP allows you to synchronize switch clocks via the Internet. 1. SNTP Client: Enable or disable SNTP...

Page 71 - Daylight Saving Period:

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 64 Standard NZT - New Zealand 4. SNTP Sever URL: Set the SNTP server IP address. 5. Daylight Saving Period: Set up the Daylight Saving beginning time and Daylight Saving ending time. Both will be...

Page 72 - IP Security; Enable HTTP Server

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 65 IP Security The IP security function allows the user to assign 10 specific IP addresses that have permission to access the switch through the web browser for managing the switch. IP Security M...

Page 74 - User Authentication; Key in the new user name (The default is “root”)

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 67 User Authentication Here you can change login user name and password for management security. 1. User name: Key in the new user name (The default is “root”) 2. Password: Key in the new passwor...

Page 75 - Port Statistics; Up

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 68 Port Statistics The following information provides the current port statistic information. Port: The port number. Type: Displays the current speed of connection to the port. Link: The status o...

Page 76 - Port Control; Enable

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 69 Port Control In Port control, you can view every port status that depended on user setting and the negotiation result. 1. Port: select the port that you want to configure. 2. State: Current po...

Page 77 - Port Trunk; LACP operation requires full-duplex; Aggregator setting; Group ID; LACP State Activity

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 70 Port Trunk The Link Aggregation Control Protocol (LACP) provides a standardized means for exchanging information between Partner Systems on a link to allow their Link Aggregation Control insta...

Page 79 - Aggregator Information; static trunk group information in here.

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 72 Aggregator Information When you have setup the aggregator setting with LACP disabled, you will see the local static trunk group information in here. 1. Group Key: Displays the trunk group ID. ...

Page 80 - State Activity; Passive

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 73 State Activity Having set up the LACP aggregator on the tab of Aggregator Setting, you can configure the state activity for the members of the LACP trunk group. You can tick or cancel the chec...

Page 81 - Port Mirroring; There is only one port that can be selected to be the destination

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 74 Port Mirroring The Port mirroring is a method for monitoring traffic in switched networks. Traffic through ports can be monitored by one specific port. That means traffic going in or out monit...

Page 82 - Rate Limiting; Ingress Limit Frame type:

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 75 Rate Limiting You can set up every port’s bandwidth rate and frame limitation type. Ingress Limit Frame type: Select the frame type that you expect to filter. The frame types have 4 options fo...

Page 83 - VLAN configuration; configuration of VLAN operation mode is “

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 76 VLAN configuration A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain. This enables isolation of network traffic, so only the members of the VLAN will receive ...

Page 84 - VLAN configuration—Port-based VLAN; such as the protocol.; Click; to add a new VLAN group(The maximum VLAN group is up to 256

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 77 VLAN configuration—Port-based VLAN Packets can go among only members of the same VLAN group. Note all unselected ports are treated as belonging to another single VLAN. If port-based VLAN is en...

Page 85 - Note

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 78 VLAN—Port Based Add interface You will see the VLAN displays. Use Delete button to delete unwanted VLAN. Use Edit button to modify existing VLAN group. Note Remember to execute the ‘Save Confi...

Page 87 - Group Configuration

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 80 802.1Q Configuration 1. Enable GVRP Protocol: check the check box to enable GVRP protocol. 2. Select the port that you want to configure. 3. Link Type : There are 3 types of link type. Access ...

Page 88 - You can Change the VLAN group name and VLAN ID.

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 81 Group Configuration interface 3. You can Change the VLAN group name and VLAN ID. 4. Click Apply . Group Configuration interface

Page 89 - Rapid Spanning Tree; RSTP - System Configuration

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 82 Rapid Spanning Tree The Rapid Spanning Tree Protocol (RSTP) is an evolution of the Spanning Tree Protocol and provides for faster spanning tree convergence after a topology change. The system ...

Page 91 - RSTP - Port Configuration; True

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 84 RSTP - Port Configuration You can configure path cost and priority of every port. 1. Path Cost: The cost of the path to the other bridge from this transmitting bridge at the specified port. En...

Page 93 - SNMP Configuration; System Configuration; Community Strings

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 86 SNMP Configuration Simple Network Management Protocol (SNMP) is the protocol developed to manage nodes (servers, workstations, routers, switches and hubs etc.) on an IP network. SNMP enables n...

Page 95 - Trap Configuration; Enter the IP address of trap manager.; and click; . You cannot edit the name of the default community string set.

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 88 Trap Configuration A trap manager is a management station that receives traps, the system alerts generated by the switch. If no trap manager is defined, no traps will issue. Create a trap mana...

Page 96 - SNMPV3 Configuration; Context Table; User Profile

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 89 SNMPV3 Configuration Configure the SNMP V3 function. Context Table Configure SNMP v3 context table. Assign the context name of context table. Click Add to add context name. Click Remove to rem...

Page 99 - QoS Configuration; QoS Policy and Priority Type; Use the strict priority scheme:

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 92 QoS Configuration You can configure Qos policy and priority setting, per port priority setting, COS and TOS setting. QoS Policy and Priority Type Qos Policy: select the Qos policy rule. Using ...

Page 101 - Port Base Priority; COS Configuration; TOS Configuration

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 94 Port Base Priority Configure per port priority level. Port: Each port has 4 egress queues – High, Middle, Low, and Lowest. Click Apply . COS Configuration Set up the COS priority level. COS pr...

Page 102 - IGMP Configuration

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 95 IGMP Configuration The Internet Group Management Protocol (IGMP) is an internal protocol of the Internet Protocol (IP) suite. IP manages multicast traffic by using switches, routers, and hosts...

Page 104 - Enable Ring Master:; Ring Port

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 97 X-Ring X-Ring provides a faster redundant recovery than Spanning Tree topology. The action is similar to STP or RSTP, but the algorithms are different. In the X-Ring topology, every switch sho...

Page 105 - Enable Coupling Ring:

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 98 to be the forwarding port of the Ring Master switch. Enable Coupling Ring: To enable the coupling ring function. Marking the check box to enable the coupling ring function. Coupling port: Assi...

Page 106 - LLDP Configuration; LLDP Protocol

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 99 LLDP Configuration Link Layer Discovery Protocol (LLDP) is defined in the IEEE 802.1AB. It is an emerging standard which provides a solution for the configuration issues caused by expanding LA...

Page 107 - Security

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 100 Security In this section, you can configure 802.1x and MAC address table. 802.1X/Radius Configuration 802.1x is an IEEE authentication specification that prevents the client from accessing th...

Page 109 - The specified port is required to be held in the Authorized state.

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 102 802.1x Port Configuration You can configure 802.1x authentication state for each port. The State provides Disable, Accept, Reject and Authorize. Reject: The specified port is required to be h...

Page 110 - Misc Configuration

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 103 Misc Configuration 1. Quiet Period: Set the period during which the port doesn’t try to acquire a supplicant. 2. TX Period: Set the period the port wait for retransmit next EAPOL PDU during a...

Page 111 - MAC Address Table; Static MAC Address

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 104 MAC Address Table Use the MAC address table to ensure port security. Static MAC Address You can add a static MAC address; it remains in the switch's address table, regardless of whether the d...

Page 113 - MAC Filtering; Enter the MAC address that you want to filter.; address and click

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 106 MAC Filtering By filtering MAC addresses, the switch can easily filter the pre-configured MAC address and reduce insecurity. You can add and delete filtering MAC address. MAC Filtering interf...

Page 114 - All MAC Addresses; You can view all of the MAC addresses learned by the selected port.; to clear the dynamic MAC addresses information of the

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 107 All MAC Addresses You can view all of the MAC addresses learned by the selected port. Select the port number. The selected port of static & dynamic MAC address information will be display...

Page 115 - MAC Address Table—Multicast Filtering; the registered end stations.; field and click

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 108 MAC Address Table—Multicast Filtering Multicasts are similar to broadcasts. They are sent to all end stations on a LAN or VLAN. Multicast filtering determines which end stations can receive t...

Page 116 - Factory Default; Reset switch to default configuration. Click; to reset all configurations to the

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 109 Factory Default Reset switch to default configuration. Click Reset to reset all configurations to the default value. Factory Default interface

Page 117 - Save Configuration; Save all configurations that you have made in the system. Click; to save the all

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 110 Save Configuration Save all configurations that you have made in the system. Click Save to save the all configuration to the flash memory. Save Configuration interface

Page 118 - System Reboot; Reboot the switch in software reset. Click; to reboot the system.

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 111 System Reboot Reboot the switch in software reset. Click Reboot to reboot the system. System Reboot interface

Page 119 - Troubleshooting; Diagnosing LED Indicators:

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 112 Troubleshooting Verify the switch is using the right power cord/adapter (DC 12-48V), please don’t use the power adapter with DC voltage higher than 48V, or it may damage the switch. Select th...

Page 120 - Technical Specification

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 113 Technical Specification The 6 10/100/1000T + 2 10/100/1000T/ 100/1000 SFP Combo w/ X-Ring Managed Switch technical specification is following. Standard IEEE 802.3 10Base-T Ethernet IEEE 802.3...

Page 121 - K MAC address table

Transition Networks SISGM1040-162D-LR Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 114 Packet Buffer 1Mbits MAC address 8K MAC address table Flash ROM 4Mbytes DRAM 32Mbytes Connector 10/100/1000TX: 6 ports RJ-45 with Auto MDI/MDI-X function 10/100/1000T/Mini-GBIC Combo: 2 x RJ-...

Page 125 - Appendix; RJ-45 Pin Assignments

Transition Networks SISGM1040-162D-LR 118 Appendix 10 /100BASE-TX Pin outs With10/100BASE-TX cable, pins 1 and 2 are used for transmitting data, and pins 3 and 6 for receiving data. RJ-45 Pin Assignments Pin Number Assignment 1 Tx+ 2 Tx- 3 Rx+ 6 Rx- [NOTE] “+” and “-” signs represent the polarity of...

Page 132 - Cabling; Fiber segment using

Transition Networks SISGM1040-162D-LR 125 Cabling Use four twisted-pair, Category 5e/above cabling for RJ-45 port connection. The cable between the switch and the link partner (switch, hub, workstation, etc.) must be less than 100 meters (328 ft.) long. Fiber segment using single-mode connector type...