Transition Networks N-FX-ST-01 - Manuals

Page 2 - ADAPTER HARDWARE INSTALLATION; Technical Support

ADAPTER HARDWARE INSTALLATION Follow Instructions outlined in the indicated personal computer user’s guide for installing PCI Bus add-in cards into a PCI slot that supports bus mastering. CAUTION: Heed the warnings in the PC user ‘s guide in regard to proper protection against staticdischarge. Alway...

Page 3 - PCI NETWORK INTERFACE CARDS; LED Indicators

PCI NETWORK INTERFACE CARDS TRANSITION Networks Fiber-Optic PCI Network Interface Cards (Adapters) are 32-bit bus-mastering PCIcards that support both half-duplex and full-duplex operation and that comply with PCI Specifications,revision 2.1 and 2.2, and with both IEEE 802.3 10BASE-FL,100BASE-SX, an...

Page 6 - MICROSOFT WINDOWS 95 - SOFTWARE UPGRADE

MICROSOFT WINDOWS 95 - SOFTWARE UPGRADE 1. Power up the computer, and start Windows 95. 2. The following instruction is to update the driver for LANart network card. 3. Update the driver for Transition Networks / LANart (EFA020X) - open the control panelby clicking "Start," then "Setting...

Page 7 - MICROSOFT WINDOWS 98 - NEW INSTALLATION

MICROSOFT WINDOWS 98 - NEW INSTALLATION 1. Copy the appropriate device install script For NDIS3 MAC driver type copy A:\Win98\Nids3\Mac\Netamd.inf C:\Windows\Inf For NDIS4 MINIPORT driver type copy A:\Win98\Nids4\Mini\Netamd.inf C:\Windows\Inf 2. Shutdown Windows 98 and power-off the machine. 3. Ins...

Page 9 - MICROSOFT WINDOWS 98 - SOFTWARE UPGRADE

MICROSOFT WINDOWS 98 - SOFTWARE UPGRADE 1. Power up the computer and start Windows 98. 2. Update the driver for the PCI card - open the control panel by clicking "Start," then"Settings," then "Control Panel." 3. Double Click "system" 4. Click "Device Manager" ...

Page 10 - MICROSOFT WINDOWS NT 4.0 - NEW INSTALLATION

MICROSOFT WINDOWS NT 4.0 - NEW INSTALLATION 1. Install the Transiton (EFA020X series) Adapter card in accordance with your personalcomputer user's manual. Again, follow all handling procedures to avoid electro-staticdischarges. 2. Start Windows NT, and open the control panel by clicking "Start,&...

Page 11 - MICROSOFT WINDOWS NT 4.0 - SOFTWARE UPGRADE

MICROSOFT WINDOWS NT 4.0 - SOFTWARE UPGRADE 1. Start Windows NT, and open the control panel by clicking "Start," then "Settings," then"Control Panel." 2. Double Click on "Network." 3. Click on the Adapters tab. 4. Highlight the existing Transition LANart adapter, and ...

Page 13 - LOAD INSTALL

NOVELL NETWARE 4.X/ 5.X - SOFTWARE UPGRADE/ADDINGNETWORK CARD TO AN EXISTING SYSTEM. 1. Shutdown Netware Server and power-off the machine. 2. Install the Transiton / LANart (EFA020X series) Adapter card in accordance with yourpersonal computer user's manual. Again, follow all handling procedures to ...

Page 14 - MICROSOFT WINDOWS NT 4.0 - PERMANET SERVER

MICROSOFT WINDOWS NT 4.0 - PERMANET SERVER The PermaNet Server feature allows users to configure a pair of LANart PCI device based NIC asprimary and secondary, and provides the ability to automatically fail-over from primary adapter tothe secondary adapter should the link status of the primary go do...

Page 16 - COMPLIANCE INFORMATION; Canadian Regulations

COMPLIANCE INFORMATION CISPR/EN55022 Class AFCC Regulations This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 ofthe FCC rules. These limits are designed to provide reasonable protection against harmful interference when theequipment ...