Transition Networks E-TBT-HB-0802 - Manuals

Page 2 - LANMaster T8

LANMaster T8 Compliance InformationUL Listed FCC RegulationsThis equipment has been tested and found to comply with thelimits for a Class A digital device, pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable protectionagainst harmful interference when the equipment i...

Page 3 - Table of Contents; LANMaster T8 SPECIFICATIONS; Policy And Procedure; B. Limitations and Exclusions

LANMaster T8 Table of Contents 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . 1 The LANMaster T8 8-Port Ethernet Hub w/SIC Slot . . . . . . . .1 LANMaster T8 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1Networking the LANMaster T8 . . . . . . . . . . . . ....

Page 4 - The LANMaster T8 Hub w/SIC Slot; LANMaster T8 8-Port Ethernet Hub w/SIC Slot Features; 0BaseT Cable Specifications; Segment Distance

LANMaster T8 18 1 8-Port Ethernet Hub w/SIC Slot 1. INTRODUCTION This guide is intended for the system or network administratorresponsible for installing and monitoring a TRANSITION NetworksLANMaster T8 8-Port Ethernet Hub w/SIC Slot. A workingknowledge of local area network (LAN) operations, includ...

Page 5 - LANMaster T8 Specifications; Dimensions; Humidity; Cable Specifications; 0Base2 Cable Specifications; The 15 pin AUI cable must be IEEE approved.; 0BaseFL Cable Specifications; The IEEE 802.3 standard for fiber optic segments are:

LANMaster T8 2 17 8-Port Ethernet Hub w/SIC Slot Networking the LANMaster T8 8-Port Ethernet Hubw/SIC Slot 10BaseT connections can be made to terminal equipment and toother LANMaster T8s. Additionally, optional Slide-In cards (SICs) can be installed at theback of the LANMaster T8 to provide a connec...

Page 6 - Connectors, Indicators and Switches; Connectors; Technical Support; or your local distributor.

LANMaster T8 16 3 8-Port Ethernet Hub w/SIC Slot Connectors, Indicators and Switches Connectors Eight (8) RJ-45 10BaseT connectors are located on the front of theLANMaster T8 Hub. One (1) power connector is located on the backof the LANMaster T8 Hub. NOTE: Slide-In cards (SICs) can provide optional ...

Page 7 - steady green; SITE CONSIDERATIONS

LANMaster T8 4 15 8-Port Ethernet Hub w/SIC Slot 4. OPERATION The LANMaster T8 8-Port Ethernet Hub w/SIC Slot normallyrequires no intervention beyond occasionally monitoring the Powerand Port Indicator LEDs. Monitoring Power LED The green Power LED is illuminated when the LANMaster T8 8-PortEthernet...

Page 8 - Ensuring Compliance with 5-Segment Rule; Powering the LANMaster T8

LANMaster T8 14 5 8-Port Ethernet Hub w/SIC Slot Ensuring Compliance with 5-Segment Rule To conform to the Ethernet 802.3 specification, when connectingLANMaster T8 Hubs, the transmission path between any two DataTerminating Equipment (DTE) devices can consist of no more thanfive segments. NOTE: A s...

Page 9 - Ensuring Correct 10BaseT Configuration; BNC Connector/10Base2 Connection; Straight Through Cable

LANMaster T8 6 13 8-Port Ethernet Hub w/SIC Slot Ensuring Correct 10BaseT Configuration The 10BaseT cable and RJ-45 connectors for Hub to Terminalconnections must be configured as straight through. The 10BaseTcable and RJ-45 connectors for Hub to Hub connections must beconfigured as crossover. NOTE:...

Page 10 - Unpacking the LANMaster T8; Item; Female AUI Connector/10Base5 Connection

LANMaster T8 12 7 8-Port Ethernet Hub w/SIC Slot 3. INSTALLATION To install the LANMaster T8 Hub: • Unpack the LANMaster T8 Hub.• Install on flat surface. • Connect 10BaseT Cable at Front. • Optionally install Slide-In Cards. • Optionally install Slide-In Card cable. • Connect LANMaster T8 Hub to po...

Page 11 - Installing LANMaster T8 on Flat Surface; Connecting Cable to Slide-In Cards; Twisted Pair Connector/10BaseT Connection; crossover; OR

Installing LANMaster T8 on Flat Surface To install the LANMaster T8 on table, shelf, or other flat surface: 1. Carefully turn LANMaster T8 to side. 2. Install four (4) rubber feet: • Remove protective paper from adhesive surface of rubberfoot. • Position rubber foot at bottom corner of LANMaster T8....

Page 12 - Installing Slide-In Cards

Installing Slide-In Cards CAUTION: Wear a grounding device and observe electrostaticdischarge precautions when installing Slide-In Cards. Failure toobserve this caution could result in circuit board failure. NOTE: Slide-in Cards can be hot-swapped. To install a Slide-In Card: 1. Determine if the Sli...