Trane LS-90 - Manuals

Trane LS-90 – Manual in PDF format online.

Manuals:

Manual

Manual Trane LS-90

Summary

Page 2 - TOOLS; Good; REMOVE OLD UNIT; Caution

2 PG 2 You will need a small Phillips screwdriver and a drill with 3/16-in. (4.8mm) bit for wall mounts. Replacement installations - mount the LS-90 in place of the thermostat. You must have a “C” wire or other 24VAC power available at the LS-90 location. A new location will require moving your wiri...

Page 3 - What wires do you have?; Connect your wires

4 PG 4 What wires do you have? Make sure your wires are labeled. This may require you to nd the ‘other end’ connection for each wire on your heating or air conditioning equipment and read the label there. Refer to the Wire Reference page 13 for better understanding of wire labels from different HVAC...

Page 4 - Mount the LS-90 to wall; Wall; HVAC Set-up on screen menu

6 PG 6 Mount the LS-90 to wall 1. Hold the LS-90 against the wall, with the wires coming over the top above terminal block. The LS-90 will cover the hole in the wall. 2. Position LS-90 for best appearance. Use the optional stand- offs if more space for wires is needed behind the LS-90.3. Attach the ...