Trane 9125051 - User Manual

Andersen® VeriLock™ to Z-Wave

Translator Module

The Andersen VeriLock to Z-Wave Translator Module enables door/

window status monitoring, alerts and complete home automation

integration with Nexia.

For help with this product, please call Andersen Customer Service:

855-337-8806. For help with your Nexia account, please call Nexia

Customer Service: 877-451-7278.

Required Components

The following are required components in a VeriLock system with Nexia™ Home

Intelligence integration.

Begin Here

Before starting,

please watch

the “VeriLock Translator Setup” video on the Nexia™

Home Intelligence YouTube Channel.

Create Your Nexia Account

1. Use your web browser to visit www.mynexia.com.

2. Select Sign Up Now.

3. Complete all information on the Create Your Account page.

4. On the Choose Your Device page, select:

✔

Bridge

✔

VeriLock Translator

Enroll Your Bridge

5. Proceed through the Bridge preparation steps. Ensure that you have a Nexia

Bridge, Bridge power supply and Ethernet cable. DO NOT connect the Bridge to

power until prompted.

6. When prompted online, enter the 12-digit MAC address printed on the yellow label

on the Nexia Bridge.

7. When prompted online, connect the Bridge to power and Connect the Bridge to

your router using an Ethernet cable.

8. Allow the Bridge setup to complete.

Add Your VeriLock Translator

9. Proceed online through the preparation steps for your VeriLock Translator.

10. While the 4-minute timer is running, plug your VeriLock Translator into an outlet

within 30 feet of your Nexia Bridge. If a success message is not shown within one

minute, try pressing and releasing the VeriLock Translator round Z-Wave button

while the 4-minute timer is still running.

NEXIA

NEXIA

Nexia

Bridge

Your Nexia Account

Nexia Bridge transmits information between your Nexia account and your

home’s Z-Wave devices

VeriLock Translator listens to VeriLock sensors and transmits information

to the Nexia bridge

VeriLock Sensors transmit locked/unlocked and opened/closed information for

doors and windows

VeriLock

Translator

VeriLock

Sensors

For detailed setup instructions, please go to www.MyNexia.com and click Help, then

click Andersen VeriLock.

Technical Specifications

For Indoor Use only, 120VAC, 60Hz, Audible Buzzer: 70 dB @3m max

Visual Indicators: Green, Yellow, Red LEDs

Basic Troubleshooting

With any wireless system, variables in home construction and environment can impact

communications quality. If your system is not working as expected, please start with

the following troubleshooting tips.

• If you have any other wireless transmitters, such as a baby monitor, temporarily

disable the transmitter and re-test Nexia operation.

• In the Nexia web portal, go to Edit Home, Advanced. Press Test Connection for

the VeriLock Translator. Communications quality should be at least 70%. If not, try

locating your VeriLock Translator closer to the Nexia bridge. Optimal performance is

usually achieved when the translator is within 30 feet of your Nexia bridge. Additional

Z-Wave repeaters can be used to improve Z-Wave communications quality.

• Use the VeriLock Translator diagnostics mode to confirm sensor communications

are recognized by the translator. Honeywell 5800 series repeaters can be used to

improve sensor to translator communication.

• Ensure VeriLock sensor battery pull strips have been removed.
• Ensure VeriLock sensor batteries are fresh.

Prepare the Nexia Mobile App

11. Download the Nexia™ Home Intelligence app onto your mobile device (Android,

iOS or Windows Phone are currently supported).

12. Open the Nexia app.

13. Select Sign In. Enter the same username and password you created for your

Nexia account.

14. Create a 4-digit PIN.

Add VeriLock Sensors

15. From the app, select Add VeriLock Sensor.

16. After adding all sensors, use Nexia to monitor sensor status and send alerts for

each of your VeriLock Sensors.

© 2014 Ingersoll Rand

Printed in USA

18-HD76D1-1 10/14