Trane CONT8501 - User Manual

032-5091-01 page 5 The Temperature Control Panel is where target temperatures are manually set and adjusted. Press in the INdoor TeMPeraTUre area to reveal the Temperature Control Panel. Use the UP and doWN arrows to manually adjust the target temperature. Press in the INdoor TeMPeraTUre area again ...

page 6 XL850 User Guide Menu Screen 4:19 PM Tue, Dec 16 Home Back Disables the touch screen for 30 seconds for cleaning - use only a soft damp cloth to clean screen Press to display your Dealer’s contact information Press to use Z-Wave bridge/repeater functions (see Nexia™ Home Intelligence section ...

032-5091-01 page 7 Settings Screen 4:19 PM Tue, Dec 16 Home Back 78° 82° $ Initiate User Setup Wizard Press to manually upgrade sofware. See Software Upgrades for more information Restore all user settings to factory defaults Press to set Temperature Scale, Deadband, Calibration* and Displayed Outdo...

page 8 XL850 User Guide Scheduling Schedule Screen Schedule Mon Tue Wed Thu Fri Sat Sun 6:00 am 8:00 am 6:00 pm 10:00 pm 78º 70º 85º 78º 70º 82º 62º 62º Wake Add Period Day Delete Period Away Home Sleep Copy Day Home Guided Schedule Back Press here to add a period Press the Time to change start or s...

032-5091-01 page 9 Changing Period Start or end Times 1. Press anywhere in the Period to make it active. Other Periods will dim and the Start and End times for this Period will be in a black box. 2. Press the TIMe STarT or TIMe eNd and adjust the time using the UP and doWN arrows. Note: The XL850 us...

page 10 XL850 User Guide The XL XL850 Smart Control is capable of adjusting the temperature settings throughout the day according to a user-programmable schedule. Each day of the week can have its own unique schedule, and each day can have a maximum of six Periods.Important: Scheduling must be enabl...

032-5091-01 page 11 deleting Periods 1. From the Schedule Screen press deLeTe PerIod, the Delete Periods Screen is displayed. 2. Press the TraSH CaN icon in the Period(s) you wish to delete. Note that each day must have at least one Period. 3. Press aPPLY to save your changes and return to the Sched...

page 12 XL850 User Guide Note: These functions require Scheduling to be enabled. To enable Scheduling, go to MeNU>SeTTINGS>SCHedULeS and select eNabLe. Hold Until Follow these steps to override a schedule until a specified time. 1. Press in the INdoor TeMPeraTUre area to reveal the Temperature...

032-5091-01 page 13 1-Touch Presets provide predetermined Heating and Cooling Set Points for Home, Away and Sleep time periods.Note: 1-Touch Presets requires Scheduling to be disabled. To disable Scheduling, go to MeNU>SeTTINGS>SCHedULeS and select dISabLe.When scheduling is disabled, heating ...

page 14 XL850 User Guide When enrolled to a Nexia™ Home Intelligence account, the XL850 is a Z-Wave security-enabled device that can serve as a central hub for an entire network of home automation devices and can display local weather conditions, five-day forecasts and National Weather Service warni...

032-5091-01 page 15 Including/excluding Z-Wave devices Your XL850 is designed to integrate seamlessly with Nexia™ Home Intelligence as part of a complete Z-Wave home automation system. If you do not have a Z-Wave bridge on your account, the XL850 will automatically configure itself as your Z-Wave br...

page 16 XL850 User Guide In existing Z-Wave networks already configured with a Z-Wave bridge, the XL850 Control will automatically configure itself as a Z-Wave repeater. See the section titled Including/Excluding Z-Wave Devices for additional information on using the XL850 Control as a Z-Wave bridge...

032-5091-01 page 17 Security Settings Security setting options on the 850 Control are Off, On and Guest Access. To access the Security Settings, press MeNU>SCreeN LoCk. Screen Lock off The Control and all settings are accessible. Screen Lock on After applying Screen Lock and after one minute of i...

page 18 XL850 User Guide automatic Upgrades When the XL850 is connected to a Nexia™ Home Intelligence account, software upgrades will occur automatically and do not require user intervention. Manual Upgrades The software may also be manually upgraded. This procedure requires a computer with an Inter...

032-5091-01 page 19 FCC Notice INFORMATION TO USERThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may ca...