TP-Link TL-MR3020 - Manuals

Page 2 - COPYRIGHT & TRADEMARKS; Specifications are subject to change without notice.

COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form ...

Page 4 - 당해; NCC Notice & BSMI Notice; 注意!; 依據低功率電波輻射性電機管理辦法

CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subj...

Page 5 - 安全諮詢及注意事項; Safety Information

第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通行；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業之無線電信。低功率射頻電機需忍受合法通信或工業、科學以及醫療用電波輻射性電機設備之干擾。安全諮詢及注意事項 ●請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。 ●清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。 ●注意防潮，請勿將水或其他液體潑灑到本產品上。  ●插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。 ●請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不...

Page 6 - DECLARATION OF CONFORMITY; For the following equipment:; The product carries the CE Mark:; Yang Hongliang

TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: Portable 3G/4G Wireless N Router Model No.: TL-MR3020 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the p...

Page 7 - CONTENTS

CONTENTS Package Contents .......................................................................................................................... 1 Chapter 1. Introduction................................................................................................................. 2 1.1 Overvi...

Page 12 - Portable 3G/4G Wireless N Router; Package Contents; missing, please contact your distributor.

TL-MR3020 Portable 3G/4G Wireless N Router Package Contents The following items should be found in your package: ¾ Portable 3G/4G Wireless N Router TL-MR3020 ¾ Power Adapter for Portable 3G/4G Wireless N Router TL-MR3020 ¾ USB Cable ¾ Ethernet cable ¾ Quick Installation Guide ¾ Resource CD for Porta...

Page 13 - Chapter 1. Introduction; Overview of the Router; Flexible Network Connection; outside on business.; Excellent Compatibility; Router TL-MR3020 without any explanation.

TL-MR3020 Portable 3G/4G Wireless N Router Chapter 1. Introduction 1.1 Overview of the Router TP-LINK understands the need for sharing the 3G/4G connection on the go and so we’ve realized the convenience with our latest Portable Wireless N 3G/4G Router TL-MR3020 ----- it gives you the freedom to qui...

Page 15 - Figure 1-1 Front Panel sketch; Name

TL-MR3020 Portable 3G/4G Wireless N Router 1.4 Panel Layout 1.4.1 The Front Panel Figure 1-1 Front Panel sketch The Router’s LEDs are located on the front panel (View from top to bottom). Name Status Indication On Power is on. Power Off Power is off. On The router is connected to the Internet, but t...

Page 16 - Figure 1-2 Rear Panel sketch

TL-MR3020 Portable 3G/4G Wireless N Router 1.4.2 The Rear Panel Figure 1-2 Rear Panel sketch The following parts are located on the rear panel (View from left to right). ¾ 3G/4G USB Port: This port is used to plug a 3G/4G modem/card. ¾ Mini USB Port: This port is used to connect the provided power a...

Page 17 - Chapter 2. Connecting the Router; System Requirements; TCP/IP protocol on each PC; Installation Environment Requirements; Avoid direct irradiation of any strong light (such as sunlight); Connecting the Router; take the following steps for different modes.

TL-MR3020 Portable 3G/4G Wireless N Router Chapter 2. Connecting the Router 2.1 System Requirements ¾ 3G/4G Mobile Broadband Internet Access Service (With a LTE /HSPA+ /HSUPA /HSDPA /UMTS /EVDO USB dongle) ¾ PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors ¾ TCP/IP prot...

Page 18 - can connect to the Router for Internet connection.

TL-MR3020 Portable 3G/4G Wireless N Router 1. Switch the mode of the Router on 3G/4G Router mode. 2. Connect the notebook/PC to the Ethernet port of TL-MR3020 Router with an Ethernet cable. 3. Connect the 3G/4G modem/card to the 3G/4G USB port of the Router. 4. Connect one end of the provided USB ca...

Page 20 - Mode

TL-MR3020 Portable 3G/4G Wireless N Router d) Client Mode In this mode, the Router will act as a wireless card to connect with wireless network. -9-

Page 21 - Chapter 3. Quick Installation Guide

TL-MR3020 Portable 3G/4G Wireless N Router Chapter 3. Quick Installation Guide This chapter will show you how to configure the basic functions of your Portable 3G/4G Wireless N Router using Quick Setup Wizard within minutes. 3.1 3G/4G Router Mode The default IP address of the Portable 3G/4G Wireless...

Page 25 - After the rebooting, please reconnect to the network according to

TL-MR3020 Portable 3G/4G Wireless N Router Figure 3-8 Quick Setup – Finish ) Note: After the rebooting, please reconnect to the network according to 3.1.2 Connect to Network . If Wireless Security is enabled, you need to enter the password you’ve just set to successfully finish the connecting. 3.2 W...

Page 27 - Figure 3-13 Quick Setup – PPPoE

TL-MR3020 Portable 3G/4G Wireless N Router 4. Choose your WAN Connection type and click Next to continue. Figure 3-12 Quick Setup – WAN Connection Type ¾ If the connection type is PPPoE , the next screen will appear as shown in Figure 3-13. Figure 3-13 Quick Setup – PPPoE z User Name and Password - ...

Page 28 - Figure 3-14 Quick Setup – MAC Clone; Yes; click; Clone MAC Address; computer, please select; WAN MAC Address; Figure 3-15 Quick Setup – MAC Clone

TL-MR3020 Portable 3G/4G Wireless N Router Figure 3-14 Quick Setup – MAC Clone z If you are visiting the Router from the main computer, please select Yes , and then click Clone MAC Address . z If you are visiting the Router from another computer, rather than the main computer, please select No , and...

Page 29 - Figure 3-17 Quick Setup – Wireless

TL-MR3020 Portable 3G/4G Wireless N Router z IP Address - This is the WAN IP address seen by external users on the Internet (including your ISP). Enter the IP address into the field. z Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually 255.255.255.0. z Default Gateway - Ente...

Page 32 - Figure 3-23 Quick Setup – AP; MYSSID

TL-MR3020 Portable 3G/4G Wireless N Router Figure 3-22 Quick Setup – Wireless Operation Mode ¾ If you choose Access Point (AP) , the next screen will appear as shown in Figure 3-23. This operation mode allows wireless stations to access. Figure 3-23 Quick Setup – AP z Wireless Network Name (SSID) - ...

Page 33 - Figure 3-24 Quick Setup – Repeater; Survey

TL-MR3020 Portable 3G/4G Wireless N Router z Region - Select your region from the pull-down list. This field specifies the region where the wireless function of the Router can be used. It may be illegal to use the wireless function of the Router in a region other than one of those specified in this ...

Page 34 - Figure 3-25 Quick Setup – Bridge with AP; Region

TL-MR3020 Portable 3G/4G Wireless N Router z Region - This field determines which operating frequency will be used. To achieve more information, you can read the same glossary in Access Point part. ¾ If you choose Bridge with AP , the next screen will appear as shown in Figure 3-25. This operation m...

Page 36 - After the rebooting, please change the PC’s TCP/IP settings to “; Obtain an IP address; ” and “; Obtain DNS server address automatically; ” according to

TL-MR3020 Portable 3G/4G Wireless N Router Key Type - You can select the WEP key length ( 64-bit , or 128-bit , or 152-bit .) for encryption. “ Disabled " means this WEP key entry is invalid. For 64-bit encryption - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, and null ...

Page 37 - configuration

TL-MR3020 Portable 3G/4G Wireless N Router configuration , and then reconnect to the network according to 3.3.2 Connect to Network . If Wireless Security is enabled, you need to enter the password you’ve just set to successfully finish the connecting. -26-

Page 39 - Figure 4-1 Router Status; WPS

TL-MR3020 Portable 3G/4G Wireless N Router Figure 4-1 Router Status 4.3 Quick Setup Please refer to Chapter 3: "Quick Installation Guide." 4.4 WPS This section will guide you add a new wireless device to an existing network quickly by WPS (Wi-Fi Protected Setup) function. -28-

Page 40 - ”, and you will see the next screen (shown in; PBC

TL-MR3020 Portable 3G/4G Wireless N Router a). Choose menu “ WPS ”, and you will see the next screen (shown in Figure 4-2 ). Figure 4-2 WPS ¾ WPS Status - Enable or disable the WPS function here. ¾ Current PIN - The current value of the Router's PIN displayed here. The default PIN of the Router can ...

Page 41 - Step 3: Wait for a while until the next screen appears. Click; Finish; to complete the WPS

TL-MR3020 Portable 3G/4G Wireless N Router Step 2: Press and hold the WPS button of the adapter directly for 2 or 3 seconds. Step 3: Wait for a while until the next screen appears. Click Finish to complete the WPS configuration. The WPS Configuration Screen of Wireless Adapter -30-

Page 42 - in the; Next; The WPS Configuration Screen of Wireless Adapter

TL-MR3020 Portable 3G/4G Wireless N Router Method Two: Step 1: Press the WPS/RESET button on the front panel of the Router for less than 5 seconds. Step 2: For the configuration of the wireless adapter, please choose Push the button on my access point in the configuration utility of the WPS as below...

Page 43 - Enabled; and click the; Add device; button in Figure; Figure 4-3 Add A New Device; Press the button of the new device; in two minutes and click; Connect

TL-MR3020 Portable 3G/4G Wireless N Router The WPS Configuration Screen of Wireless Adapter Method Three: Step 1. Keep the default WPS Status as Enabled and click the Add device button in Figure 4-2, then the following screen will appear. Figure 4-3 Add A New Device Step 2. Choose Press the button o...

Page 44 - Figure

TL-MR3020 Portable 3G/4G Wireless N Router Step 4. Wait for a while until the next screen appears. Click Finish to complete the WPS configuration. The WPS Configuration Screen of Wireless Adapter II. By PIN If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the ne...

Page 47 - Figure 4-5 Internet Access Mode; to WAN access immediately.; WAN Only; Click the; Save; button to save your settings.; WAN Preferred

TL-MR3020 Portable 3G/4G Wireless N Router Figure 4-5 Internet Access Mode ¾ 3G/4G Only (Recommended) In this mode, the router will try 3G/4G access only. WAN access is disabled. ¾ 3G/4G Preferred In this mode, the router will try 3G/4G access first. When 3G/4G access fails and WAN access is valid, ...

Page 48 - Choose menu “; Network; ”, you can configure parameters for 3G/4G function on the screen; Identified; shown in; Advanced Settings; Note; change settings on

TL-MR3020 Portable 3G/4G Wireless N Router 4.5.2 3G/4G Choose menu “ Network → 3G/4G ”, you can configure parameters for 3G/4G function on the screen below. To use the 3G/4G function, you should first insert your USB modem on the USB port of the Router. There is already much 3G/4G USB modem informat...

Page 52 - Dynamic IP

TL-MR3020 Portable 3G/4G Wireless N Router 1. Download a most recent 3G/4G USB modem configuration file from our website (http://www.tp-link.com). 2. Click the Add New... button in Figure 4-11, and then you will see Figure 4-12. 3. Click Browse… to select the path name where you save the downloaded ...

Page 53 - If you get Address not found error when you access a Web site,

TL-MR3020 Portable 3G/4G Wireless N Router Figure 4-13 WAN - Dynamic IP This page displays the WAN IP parameters assigned dynamically by your ISP, including IP address, Subnet Mask, Default Gateway, etc. Click the Renew button to renew the IP parameters from your ISP. Click the Release button to rel...

Page 56 - Only when you have configured the system time on; Time-based Connecting; function can take effect.

TL-MR3020 Portable 3G/4G Wireless N Router ¾ Time-based Connecting - The connection will only be established in the period from the start time to the end time (both are in HH:MM format). ) Note: Only when you have configured the system time on System Tools -> Time page, will the Time-based Connec...

Page 61 - button to; PPPoE; Connections which use dynamic IP address assignment.; Static IP; Connections which use static IP address assignment.

TL-MR3020 Portable 3G/4G Wireless N Router ¾ Dynamic IP/ Static IP - Choose either as you are given by your ISP and enter the ISP’s IP address or the domain name. If you choose static IP and enter the domain name, you should also enter the DNS assigned by your ISP. And click the Save button. Click t...

Page 62 - Only the PC on your LAN can use the; MAC Address Clone

TL-MR3020 Portable 3G/4G Wireless N Router The Router can not detect PPTP/L2TP/BigPond connections with your ISP. If your ISP uses one of these protocols, then you must configure your connection manually. 4.5.4 MAC Clone Choose menu “ Network → MAC Clone ”, you can configure the MAC address of the W...

Page 63 - while the Virtual Server and DMZ

TL-MR3020 Portable 3G/4G Wireless N Router Figure 4-21 LAN ¾ MAC Address - The physical address of the Router, as seen from the LAN. The value can't be changed. ¾ IP Address - Enter the IP address of your Router or reset it in dotted-decimal notation (factory default: 192.168.0.254). ¾ Subnet Mask -...

Page 64 - TEST

TL-MR3020 Portable 3G/4G Wireless N Router Figure 4-23 Wireless Settings ¾ Wireless Network Name - Enter a value of up to 32 characters. The same name of Wireless Network Name must be assigned to all wireless devices in your network. Considering your wireless network security, the default Wireless N...

Page 65 - If

TL-MR3020 Portable 3G/4G Wireless N Router 11n only - Select if all of your wireless clients are 802.11n. 11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients. 11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients. Select the desired wireless...

Page 66 - - This option should be chosen if the key type is WEP(ASCII) or

TL-MR3020 Portable 3G/4G Wireless N Router ¾ WEP Index - This option should be chosen if the key type is WEP(ASCII) or WEP(HEX).It indicates the index of the WEP key. ¾ Auth Type - This option should be chosen if the key type is WEP(ASCII) or WEP(HEX).It indicates the authorization type of the Root ...

Page 69 - Figure 4-28 Wireless MAC address Filtering

TL-MR3020 Portable 3G/4G Wireless N Router • WEP Key- Select which of the four keys will be used and enter the matching WEP key that you create. Make sure these values are identical on all wireless stations in your network. • Key Typ e - You can select the WEP key length (64-bit, or 128-bit, or 152-...

Page 73 - This page will be refreshed automatically every 5 seconds.

TL-MR3020 Portable 3G/4G Wireless N Router ¾ MAC Address - The connected wireless station's MAC address ¾ Current Status - The connected wireless station's running status, one of STA-AUTH / STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN / Disconnected ¾ Received Packets -...

Page 78 - service, and enter the same IP Address for that computer or server.; page to be any other value except 80 such as 8080.

TL-MR3020 Portable 3G/4G Wireless N Router Figure 4-39 Add or Modify a Virtual Server Entry ) Note : If your computer or server has more than one type of available service, please select another service, and enter the same IP Address for that computer or server. To modify or delete an existing entry...

Page 80 - connection of other hosts on LAN will be refused.

TL-MR3020 Portable 3G/4G Wireless N Router 6. Click the Save button to save the new rule. Figure 4-41 Add or Modify a Triggering Entry To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete . 2. Modify the informa...

Page 87 - Parental Control

TL-MR3020 Portable 3G/4G Wireless N Router 4.10 Parental Control Choose menu “ Parental Control ”, and you can configure the parental control in the screen as shown in Figure 4-49. The Parental Control function can be used to control the internet activities of the child, limit the child to access ce...

Page 90 - Figure 4-53 Access Control Rule Management

TL-MR3020 Portable 3G/4G Wireless N Router Figure 4-53 Access Control Rule Management ¾ Enable Internet Access Control - Select the check box to enable the Internet Access Control function, so the Default Filter Policy can take effect. ¾ Rule Name - Here displays the name of the rule and this name i...

Page 91 - Figure 4-54 Quick Setup – Create a Host Entry

TL-MR3020 Portable 3G/4G Wireless N Router There are two methods to add a new rule. Method One: 1. Click Setup Wizard button and the next screen will appear as shown in Figure 4-54. Figure 4-54 Quick Setup – Create a Host Entry ¾ Host Description - In this field, create a unique description for the ...

Page 93 - Figure 4-56 Quick Setup – Create an Advanced Schedule Entry

TL-MR3020 Portable 3G/4G Wireless N Router Figure 4-56 Quick Setup – Create an Advanced Schedule Entry ¾ Schedule Description - In this field, create a description for the schedule. Note that this description should be unique (e.g. Schedule_1). ¾ Day - Choose Select Days and select the certain day (...

Page 94 - Figure 4-58 Add Internet Access Control Entry

TL-MR3020 Portable 3G/4G Wireless N Router ¾ Rule - In this field, create a name for the rule. Note that this name should be unique (e.g. Rule_1). ¾ Host - In this field, select a host from the drop-down list for the rule. The default value is the Host Description you set just now. ¾ Target - In thi...

Page 100 - Advanced Routing

TL-MR3020 Portable 3G/4G Wireless N Router Click the Next button to go to the next page, or click the Previous button return to the previous page. Figure 4-66 Advanced Schedule Settings For example : If you desire to restrict the internet activities of host with MAC address 00-11-22-33-44-AA to acce...

Page 102 - Bandwidth Control

TL-MR3020 Portable 3G/4G Wireless N Router 4. Click the Save button to make the entry take effect. Other configurations for the entries: Click the Delete button to delete the entry. Click the Enable All button to enable all the entries. Click the Disable All button to disable all the entries. Click ...

Page 106 - Figure 4-78 Find IP & MAC Binding Entry

TL-MR3020 Portable 3G/4G Wireless N Router 2. Enter the MAC Address or IP Address. 3. Click the Find button in the page as shown in Figure 4-78. Figure 4-78 Find IP & MAC Binding Entry Click the Enable All button to make all entries enabled. Click the Delete All button to delete all entries. 4.1...

Page 107 - interference to the IP & MAC Binding list.

TL-MR3020 Portable 3G/4G Wireless N Router Click the Bind All button to bind all the current items, available after enable. Click the Load All button to load all items to the IP & MAC Binding list. Click the Refresh button to refresh all items. ) Note: An item could not be loaded to the IP &...

Page 111 - Figure 4-84 Time settings

TL-MR3020 Portable 3G/4G Wireless N Router Password, System Log and Statistics. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.16.1 Time Settings Choose menu “ System Tools → Time Setting ”, and then y...

Page 112 - Figure 4-85 Time settings; The time will be lost if the router is turned off.

TL-MR3020 Portable 3G/4G Wireless N Router To set time manually: 1. Select your local time zone. 2. Enter the Date in Month/Day/Year format. 3. Enter the Time in Hour/Minute/Second format. 4. Click Save . To set time automatically: 1. Select your local time zone. 2. Enter the address or domain of th...

Page 114 - function. Option “Tracert Hops” are used for; Tracert

TL-MR3020 Portable 3G/4G Wireless N Router Click Start to check the connectivity of the Internet. The Diagnostic Results page displays the result of diagnosis. If the result is similar to the following screen, the connectivity of the Internet is fine. Figure 4-87 Diagnostic Results ) Note: Only one ...

Page 115 - configuration, you can try to upgrade the firmware.

TL-MR3020 Portable 3G/4G Wireless N Router ) Note: 1) New firmware versions are posted at http://www.tp-link.com and can be downloaded for free. There is no need to upgrade the firmware unless the new firmware has a new feature you want to use. However, when experiencing problems caused by the Route...

Page 116 - upgrading process to prevent any damage.

TL-MR3020 Portable 3G/4G Wireless N Router Figure 4-90 Backup & Restore Configuration ¾ Click the Backup button to save all configuration settings as a backup file in your local computer. ¾ To upgrade the Router's configuration, follow these instructions. • Click the Browse… button to locate the...

Page 117 - spaces. Enter the new Password twice to confirm.

TL-MR3020 Portable 3G/4G Wireless N Router 4.16.7 Password Choose menu “ System Tools → Password ”, you can change the factory default user name and password of the Router in the next screen as shown in Figure 4-92. Figure 4-92 Password It is strongly recommended that you should change the factory d...

Page 119 - The router will reboot automatically after you click the

TL-MR3020 Portable 3G/4G Wireless N Router ¾ Standard AP - In this mode, the device enables multiusers to access, and provides several wireless modes, such as AP, Client, Repeater and so on. ¾ 3G/4G Router - In this mode, the device enables multiusers to share Internet via ADSL/Cable Modem. The wire...

Page 121 - Chapter 5. Router Configuration—WISP Mode

TL-MR3020 Portable 3G/4G Wireless N Router Chapter 5. Router Configuration—WISP Mode This chapter will show each Web page's key functions and the configuration way on WISP Mode. 5.1 Login After your successful login, you will see the main menus on the left of the Web-based utility. On the right, the...

Page 122 - Figure 5-1 Router Status; Please refer to

TL-MR3020 Portable 3G/4G Wireless N Router Figure 5-1 Router Status 5.3 Quick Setup Please refer to Chapter 3: "Quick Installation Guide." 5.4 WPS This section will guide you to add a new wireless device to an existing network quickly by WPS (Wi-Fi Protected Setup) function. a). Choose menu ...

Page 123 - Enable or disable the WPS function here.; By PBC

TL-MR3020 Portable 3G/4G Wireless N Router Figure 5-2 WPS ¾ WPS Status - Enable or disable the WPS function here. ¾ Current PIN - The current value of the Router's PIN displayed here. The default PIN of the Router can be found in the label or User Guide. ¾ Restore PIN - Restore the PIN of the Router...

Page 124 - Step 3. Wait for a while until the next screen appears. Click; to complete the WPS

TL-MR3020 Portable 3G/4G Wireless N Router Method One: Step 1. Press the WPS/RESET button on the front panel of the Router for less than 5 seconds. Step 2. Press and hold the WPS button of the adapter directly for 2 or 3 seconds. Step 3. Wait for a while until the next screen appears. Click Finish t...

Page 125 - in the configuration utility of the WPS as below, and click; Step 6. Wait for a while until the next screen appears. Click

TL-MR3020 Portable 3G/4G Wireless N Router Method Two: Step 4. Press the WPS/RESET button on the front panel of the Router for less than 5 seconds. Step 5. For the configuration of the wireless adapter, please choose Push the button on my access point in the configuration utility of the WPS as below...

Page 126 - Figure 5-3 Add A New Device

TL-MR3020 Portable 3G/4G Wireless N Router The WPS Configuration Screen of Wireless Adapter Method Three: Step 1. Keep the default WPS Status as Enabled and click the Add device button in Figure 4-2, then the following screen will appear. Figure 5-3 Add A New Device Step 2. Choose Press the button o...

Page 128 - Enter the PIN from my Router; Enter a PIN from my; of the Router into the field behind Access Point PIN. Then click

TL-MR3020 Portable 3G/4G Wireless N Router The WPS Configuration Screen of Wireless Adapter ) Note: In this example, the default PIN code of this adapter is 16952898 as the above figure shown. Method Two: Enter the PIN from my Router Step 1. Get the Current PIN code of the Router in Figure 5-2 (each...

Page 129 - Figure 5-4 the Network menu; WAN

TL-MR3020 Portable 3G/4G Wireless N Router Step 3. You will see the following screen when the new device successfully connected to the network. ) Note: 1) The status LED on the Router will light green all the time if the device has been successfully added to the network. 2) The WPS function cannot b...

Page 133 - Figure 5-8 PPPoE Advanced Settings

TL-MR3020 Portable 3G/4G Wireless N Router ¾ Connect Automatically - The connection can be re-established automatically when it was down. ¾ Time-based Connecting - The connection will only be established in the period from the start time to the end time (both are in HH:MM format). ) Note: Only when ...

Page 134 - Figure 5-9 WAN – BigPond Cable

TL-MR3020 Portable 3G/4G Wireless N Router ¾ ISP Specified IP Address - If your ISP does not automatically assign IP addresses to the Router during login, please click “ Use IP address specified by ISP ” check box and enter the IP address provided by your ISP in dotted-decimal notation. ¾ Detect Onl...

Page 137 - Figure 5-11 WAN –PPTP

TL-MR3020 Portable 3G/4G Wireless N Router ¾ Connect Manually - You can configure the Router to make it connect or disconnect manually. After a specified period of inactivity ( Max Idle Time ), the Router will disconnect from your Internet connection, and you will not be able to re-establish your co...

Page 139 - Figure 5-12 MAC Address Clone

TL-MR3020 Portable 3G/4G Wireless N Router The Router can not detect PPTP/L2TP/BigPond connections with your ISP. If your ISP uses one of these protocols, then you must configure your connection manually. 5.5.2 MAC Clone Choose menu “ Network → MAC Clone ”, and then you can configure the MAC address...

Page 140 - The physical address of the Router, as seen from the LAN. The value; Figure 5-14 Wireless menu; and

TL-MR3020 Portable 3G/4G Wireless N Router Figure 5-13 LAN ¾ MAC Address - The physical address of the Router, as seen from the LAN. The value can't be changed. ¾ IP Address - Enter the IP address of your Router or reset it in dotted-decimal notation (factory default: 192.168.0.254). ¾ Subnet Mask -...

Page 141 - Figure 5-15 Wireless Settings

TL-MR3020 Portable 3G/4G Wireless N Router Figure 5-15 Wireless Settings ¾ SSID - The SSID of the AP your Router is going to connect to as a client. You can also use the search function to select the SSID to join. ¾ BSSID - The BSSID of the AP your Router is going to connect to as a client. You can ...

Page 143 - Be sure to click the; button to save your settings on this page.; Wireless; ”, and then you can configure the security

TL-MR3020 Portable 3G/4G Wireless N Router ) Note: If you know the SSID of the desired AP, you can also input it into the field "SSID" manually. Be sure to click the Save button to save your settings on this page. ) Note: 1) The operating distance or range of your wireless connection varies ...

Page 144 - If you check the

TL-MR3020 Portable 3G/4G Wireless N Router Figure 5-18 ¾ Disable Security - If you do not want to use wireless security, select this check box, but it’s strongly recommended to choose one of the following modes to enable security. ¾ WPA/WPA2 – Personal (Recommended) - It’s the WPA/WPA2 authenticatio...

Page 147 - Figure 5-22 Wireless MAC address Filtering

TL-MR3020 Portable 3G/4G Wireless N Router Figure 5-22 Wireless MAC address Filtering To filter wireless users by MAC Address, click Enable . The default setting is Disable . ¾ MAC Address - The wireless station's MAC address that you want to filter. ¾ Status - The status of this entry either Enable...

Page 151 - Figure 5-26 The DHCP menu

TL-MR3020 Portable 3G/4G Wireless N Router 5.7 DHCP Figure 5-26 The DHCP menu There are three submenus under the DHCP menu (shown in Figure 5-26 ): DHCP Settings , DHCP Clients List and Address Reservation. Click any of them, and you will be able to configure the corresponding function. 5.7.1 DHCP S...

Page 152 - Figure 5-28 DHCP Clients List

TL-MR3020 Portable 3G/4G Wireless N Router ¾ Address Lease Time - The Address Lease Time is the amount of time a network user will be allowed connection to the Router with their current dynamic IP Address. Enter the amount of time in minutes and the user will be "leased" this dynamic IP Addr...

Page 153 - Figure 5-29 Address Reservation

TL-MR3020 Portable 3G/4G Wireless N Router 5.7.3 Address Reservation Choose menu “ DHCP → Address Reservation ”, and then you can view and add a reserved address for clients via the next screen (shown in Figure 5-29). When you specify a reserved IP address for a PC on the LAN, that PC will always re...

Page 154 - Figure 5-31 The Forwarding menu

TL-MR3020 Portable 3G/4G Wireless N Router Click the Enable/ Disable All button to make all entries enabled/disabled Click the Delete All button to delete all entries Click the Next button to go to the next page and click the Previous button to return to the previous page. 5.8 Forwarding Figure 5-31...

Page 155 - Figure 5-33 Add or Modify a Virtual Server Entry

TL-MR3020 Portable 3G/4G Wireless N Router ¾ Internal Port - The Internal Service Port number of the PC running the service application. You can leave it blank if the Internal Port is the same as the Service Port , or enter a specific port number when Service Port is a single one. ¾ IP Address - The...

Page 157 - Figure 5-35 Add or Modify a Triggering Entry

TL-MR3020 Portable 3G/4G Wireless N Router 5. Select Enable in Status field. 6. Click the Save button to save the new rule. Figure 5-35 Add or Modify a Triggering Entry ¾ Trigger Port - The port for outgoing traffic. An outgoing connection using this port will trigger this rule. ¾ Trigger Protocol -...

Page 158 - other hosts on the LAN will be refused.; Incoming Ports; ranges cannot overlap each other.

TL-MR3020 Portable 3G/4G Wireless N Router Once the Router is configured, the operation is as follows: 1. A local host makes an outgoing connection to an external host using a destination port number defined in the Trigger Port field. 2. The Router records this connection, opens the incoming port or...

Page 159 - Figure 5-37 UPnP Setting

TL-MR3020 Portable 3G/4G Wireless N Router 5.8.4 UPnP Choose menu “ Forwarding → UPnP ”, and then you can view the information about UPnP in the screen (shown in Figure 5-37). The Universal Plug and Play (UPnP) feature allows the devices, such as Internet computers, to access the local host resource...

Page 160 - Figure 5-38 The Security menu

TL-MR3020 Portable 3G/4G Wireless N Router 5.9 Security Figure 5-38 The Security menu There are four submenus under the Security menu as shown in Figure 5-38: Basic Security , Advanced Security , Local Management and Remote Management. Click any of them, and you will be able to configure the corresp...

Page 162 - Dos Protection will take effect only when the; Traffic Statistics; in “; System Tool

TL-MR3020 Portable 3G/4G Wireless N Router Figure 5-40 Advanced Security ¾ Packets Statistics Interval (5~60) - The default value is 10. Select a value between 5 and 60 seconds from the drop-down list. The Packets Statistics Interval value indicates the time section of the packets statistics. The re...

Page 163 - Figure 5-41 Local Management

TL-MR3020 Portable 3G/4G Wireless N Router ¾ UDP-FLOOD Packets Threshold (5~3600) - The default value is 500. Enter a value between 5 ~ 3600. When the current UPD-FLOOD Packets number is beyond the set value, the Router will startup the blocking function immediately. ¾ Enable TCP-SYN-FLOOD Attack Fi...

Page 164 - Figure 5-42 Remote Management

TL-MR3020 Portable 3G/4G Wireless N Router access the Setup page of the Router's Web-Based Utility locally from inside the network, check the radio button “ Only the PCs listed can browse the built-in web pages to perform Administrator tasks ”, and then enter each MAC Address in a separate field. Th...

Page 165 - Parental Control; ”, and then you can configure the parental control in the screen; Figure 5-43 Parental Control Settings; To add a new entry, please follow the steps below.; the; Add New...; button and the next screen will pop-up as shown in

TL-MR3020 Portable 3G/4G Wireless N Router used is 8080, please enter http://202.96.12.8:8080 in your browser. Later, you may be asked for the Router's password. After successfully entering the username and password, you will be able to access the Router's web-based utility. 2) Be sure to change the...

Page 166 - Figure 5-44 Add or Modify Parental Control Entry

TL-MR3020 Portable 3G/4G Wireless N Router Figure 5-44 Add or Modify Parental Control Entry ¾ Parental Control - Check Enable if you want this function to take effect; otherwise, check Disable . ¾ MAC Address of Parental PC - In this field, enter the MAC address of the controlling PC, or you can mak...

Page 167 - Figure 5-45 Parental Control Settings

TL-MR3020 Portable 3G/4G Wireless N Router 4. Enter the allowed domain name of the website, either the full name or the keywords (e.g. google) in the Allowed Domain Name field. Any domain name with keywords in it ( www.google.com , www.google.com.cn ) will be allowed. 5. Select from the Effective Ti...

Page 168 - Figure 5-46 Access Control

TL-MR3020 Portable 3G/4G Wireless N Router 5.11 Access Control Figure 5-46 Access Control There are four submenus under the Access Control menu as shown in Figure 5-46: Rule , Host , Target and Schedule . Click any of them, and you will be able to configure the corresponding function. 5.11.1 Rule Ch...

Page 169 - Figure 5-48 Quick Setup – Create a Host Entry

TL-MR3020 Portable 3G/4G Wireless N Router ¾ Enable - Here displays the status of the rule, enabled or not. Check this option to enable a specific entry. ¾ Modify - Here you can edit or delete an existing rule. ¾ Setup Wizard - Click the Setup Wizard button to create a new rule entry. ¾ Add New... -...

Page 171 - Figure 5-50 Quick Setup – Create an Advanced Schedule Entry

TL-MR3020 Portable 3G/4G Wireless N Router 3. Click Next when finishing creating the access target entry, and the next screen will appear as shown in Figure 4-51. Figure 5-50 Quick Setup – Create an Advanced Schedule Entry ¾ Schedule Description - In this field, create a description for the schedule...

Page 172 - Figure 5-52 Add Internet Access Control Entry

TL-MR3020 Portable 3G/4G Wireless N Router ¾ Rule - In this field, create a name for the rule. Note that this name should be unique (e.g. Rule_1). ¾ Host - In this field, select a host from the drop-down list for the rule. The default value is the Host Description you set just now. ¾ Target - In thi...

Page 178 - Advanced Routing; Figure 5-61 Advanced Routing

TL-MR3020 Portable 3G/4G Wireless N Router Figure 5-60 Advanced Schedule Settings For example : If you desire to restrict the internet activities of host with MAC address 00-11-22-33-44-AA to access www.google.com only from 18:00 to 20:00 on Saturday and Sunday , you should first follow the settings...

Page 179 - Figure 5-62 Static Routing

TL-MR3020 Portable 3G/4G Wireless N Router 5.12.1 Static Routing List Choose menu “ Advanced Routing → Static Routing List ”, and then you can configure the static route in the next screen (shown in Figure 5-62). A static route is a pre-determined path that network information must travel to reach a...

Page 180 - Figure 5-64 System Routing Table; Bandwidth Control; Figure 5-65 Bandwidth Control

TL-MR3020 Portable 3G/4G Wireless N Router Click the Delete button to delete the entry. Click the Enable All button to enable all the entries. Click the Disable All button to disable all the entries. Click the Delete All button to delete all the entries. Click the Previous button to view the informa...

Page 181 - Figure 5-66 Bandwidth Control Settings

TL-MR3020 Portable 3G/4G Wireless N Router There are two submenus under the Bandwidth Control menu as shown in Figure 5-65: Control Settings and Rules List . Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below...

Page 182 - Figure 5-68 Bandwidth Control Rule Settings

TL-MR3020 Portable 3G/4G Wireless N Router ¾ Egress bandwidth - This field displays the max and mix upload bandwidth through the WAN port, the default is 0. ¾ Ingress bandwidth - This field displays the max and mix download bandwidth through the WAN port, the default is 0. ¾ Enable - This displays t...

Page 183 - Figure 5-70 Binding Setting

TL-MR3020 Portable 3G/4G Wireless N Router Figure 5-70 Binding Setting ¾ MAC Address - The MAC address of the controlled computer in the LAN. ¾ IP Address - The assigned IP address of the controlled computer in the LAN. ¾ Bind - Check this option to enable ARP binding for a specific device. ¾ Modify...

Page 184 - Figure 5-72 Find IP & MAC Binding Entry

TL-MR3020 Portable 3G/4G Wireless N Router 1. Click the Find button as shown in Figure 5-70. 2. Enter the MAC Address or IP Address. 3. Click the Find button in the page as shown in Figure 5-72. Figure 5-72 Find IP & MAC Binding Entry Click the Enable All button to make all entries enabled. Clic...

Page 186 - button, then input your new username and password and click the; Login

TL-MR3020 Portable 3G/4G Wireless N Router Figure 5-74 Comexe.cn DDNS Settings To set up for DDNS, follow these instructions: 1. Enter the Domain Name your dynamic DNS service provider gave. 2. Enter the User Name for your DDNS account. 3. Enter the Password for your DDNS account. 4. Click the Login...

Page 188 - Figure 5-77 The System Tools menu

TL-MR3020 Portable 3G/4G Wireless N Router Figure 5-76 No-ip.com DDNS Settings To set up for DDNS, follow these instructions: 1. Enter the User Name for your DDNS account. 2. Enter the Password for your DDNS account. 3. Enter the Domain Name you received from dynamic DNS service provider. 4. Click t...

Page 189 - Figure 5-78 Time settings

TL-MR3020 Portable 3G/4G Wireless N Router Choose menu “ System Tools ”, and you can see the submenus under the main menu: Time Settings , Diagnostic , Firmware Upgrade , Factory Defaults, Backup & Restore, Reboot, Password, System Log and Statistics. Click any of them, and you will be able to c...

Page 190 - Figure 5-79 Time settings

TL-MR3020 Portable 3G/4G Wireless N Router ¾ End - The time to end the Daylight Saving. Select the month in the first field, the week in the second field, the day in the third field and the time in the last field. ¾ Daylight Saving Status - Displays the status whether the Daylight Saving is in use. ...

Page 192 - ) Only one user can use the diagnostic tools at one time.; Figure 5-82 Firmware Upgrade

TL-MR3020 Portable 3G/4G Wireless N Router The Diagnostic Results page displays the result of diagnosis. If the result is similar to the following screen, the connectivity of the Internet is fine. Figure 5-81 Diagnostic Results ) Note: 1) Only one user can use the diagnostic tools at one time. 2) &#...

Page 193 - Figure 5-83 Restore Factory Default; All changed settings will be lost when defaults are restored.

TL-MR3020 Portable 3G/4G Wireless N Router ) Note: 1) New firmware versions are posted at http://www.tp-link.com and can be downloaded for free. There is no need to upgrade the firmware unless the new firmware has a new feature you want to use. However, when experiencing problems caused by the Route...

Page 194 - Figure 5-84 Backup & Restore Configuration

TL-MR3020 Portable 3G/4G Wireless N Router Figure 5-84 Backup & Restore Configuration ¾ Click the Backup button to save all configuration settings as a backup file in your local computer. ¾ To upgrade the Router's configuration, follow these instructions. • Click the Browse button to find the co...

Page 195 - Figure 5-86 Password; spaces. Enter the new Password twice to confirm it.

TL-MR3020 Portable 3G/4G Wireless N Router 5.16.7 Password Choose menu “ System Tools → Password ”, and then you can change the factory default user name and password of the Router in the next screen as shown in Figure 5-86. Figure 5-86 Password It is strongly recommended that you should change the ...

Page 196 - Figure 5-87 System Log

TL-MR3020 Portable 3G/4G Wireless N Router Figure 5-87 System Log ¾ Log Type - By selecting the log type, only logs of this type will be shown. ¾ Log Level - By selecting the log level, only logs of this level will be shown. ¾ Refresh - Refresh the page to show the latest log list. ¾ Save Log - Clic...

Page 197 - Figure 5-89 Statistics

TL-MR3020 Portable 3G/4G Wireless N Router ¾ Standard AP - In this mode, the device enables multiusers to access, and provides several wireless modes, such as AP, Client, Repeater and so on. ¾ 3G/4G Router - In this mode, the device enables multiusers to share Internet via ADSL/Cable Modem. The wire...

Page 199 - Chapter 6. Router Configuration—AP Mode; Selecting; Status

TL-MR3020 Portable 3G/4G Wireless N Router Chapter 6. Router Configuration—AP Mode This chapter will show each Web page's key functions and the configuration way on AP Mode. The Portable 3G/4G Wireless N Router is easy to configure and manage with the Web-based (Internet Explorer, Netscape ® Navigat...

Page 200 - Figure 6-1 Device Status; This field displays the current firmware version of the AP.; MAC address; Subnet Mask; This field displays the AP's traffic statistics.

TL-MR3020 Portable 3G/4G Wireless N Router Figure 6-1 Device Status ¾ Firmware Version - This field displays the current firmware version of the AP. ¾ Hardware Version - This field displays the current hardware version of the AP ¾ Wired - This field displays the current settings or information for t...

Page 202 - of the new device for WPS function meanwhile.

TL-MR3020 Portable 3G/4G Wireless N Router To add a new device: If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless connection between wireless adapter and device using either Push Button Configuration (PBC) method or PIN method. ) Note: To build a successful c...

Page 203 - Push the button on my

TL-MR3020 Portable 3G/4G Wireless N Router The WPS Configuration Screen of Wireless Adapter Method Two: Step 1: Press the WPS/RESET button on the front panel of the Router for less than 5 seconds. Step 2: For the configuration of the wireless adapter, please choose “ Push the button on my access poi...

Page 205 - Figure 6-3 Add A New Device

TL-MR3020 Portable 3G/4G Wireless N Router Method Three: Step 1. Keep the default WPS Status as Enabled and click the Add device button in Figure 4-2, then the following screen will appear. Figure 6-3 Add A New Device Step 2. Choose Press the button of the new device in two minutes and click Connect...

Page 206 - the following figure.

TL-MR3020 Portable 3G/4G Wireless N Router The WPS Configuration Screen of Wireless Adapter II. By PIN If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the network by PIN with the following two methods. Method One: Enter the PIN into my AP Step 1: Keep the defau...

Page 208 - added to the network.; LAN

TL-MR3020 Portable 3G/4G Wireless N Router ) Note: The default PIN code of the AP can be found in its label or the WPS configuration screen as Figure 6-2. You will see the following screen when the new device has successfully connected to the network. ) Note: 1) The WPS LED on the AP will light gree...

Page 212 - To apply any settings you have altered on the page, please click the; button, and then you; SSID

TL-MR3020 Portable 3G/4G Wireless N Router ) Note: To apply any settings you have altered on the page, please click the Save button, and then you will be reminded to reboot the device. 2) Client: This mode allows the device to act as a wireless station to enable wired host(s) to access an AP. Figure...

Page 217 - button to detect the SSIDs in the local area.; will enable you to configure wireless security for your; Figure 6-11 Wireless Security - Access Point; Operation Mode; Shows the current operation mode.

TL-MR3020 Portable 3G/4G Wireless N Router Click the Survey button to detect the SSIDs in the local area. ) Note: To apply any settings you have altered on the page, please click the Save button, and then you will be reminded to reboot the device. 6.6.2 Wireless Security Selecting Wireless > Wire...

Page 219 - Shared Key as Authentication Type.

TL-MR3020 Portable 3G/4G Wireless N Router • WEP Key Format - You can select ASCII or Hexadecimal format. ASCII format stands for any combination of keyboard characters in the specified length. Hexadecimal format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified lengt...

Page 220 - Figure 6-12 Wireless Security – Client

TL-MR3020 Portable 3G/4G Wireless N Router 2) Client Figure 6-12 Wireless Security – Client ¾ Operation Mode - Shows the current operation mode. ¾ Disable Security - Check this box radio button to disable wireless security. If disabled, the wireless stations will be able to connect this device witho...

Page 222 - Figure 6-13 Wireless Security – Repeater

TL-MR3020 Portable 3G/4G Wireless N Router 3) Repeater Figure 6-13 Wireless Security – Repeater ¾ Operation Mode - Shows the current operation mode. ¾ Disable Security - Check this box radio button to disable wireless security. If disabled, the wireless stations will be able to connect this device w...

Page 224 - Figure 6-14 Wireless Security – Bridge with AP

TL-MR3020 Portable 3G/4G Wireless N Router 4) Bridge with AP Figure 6-14 Wireless Security – Bridge with AP ¾ Operation Mode - Shows the current operation mode. ¾ Disable Security - Check this box radio button to disable wireless security. If disabled, the wireless stations will be able to connect t...

Page 225 - selected Shared Key as Authentication Type.; Figure 6-15 Wireless MAC address Filtering

TL-MR3020 Portable 3G/4G Wireless N Router • Key Type - You can select the WEP key length ( 64-bit , or 128-bit , or 152-bit .) for encryption. "Disabled" means this WEP key entry is invalid. 1) For 64-bit encryption - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, ze...

Page 226 - Figure 6-16 Add or Modify Wireless MAC Address Filtering entry

TL-MR3020 Portable 3G/4G Wireless N Router The Wireless MAC Address Filtering feature allows you to control wireless stations accessing the device, which depend on the station's MAC addresses. ¾ Operation Mode - Shows the current operation mode. ¾ Wireless MAC Filtering - Click the Enable button to ...

Page 227 - If you enable the function and select the “; Deny the stations not specified by any enabled; ” for; Filtering Rules; and there are not any enabled entries in the list,

TL-MR3020 Portable 3G/4G Wireless N Router 4. Click the Save button to save this entry. To add additional entries, repeat steps 1-4. To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete . 2. Modify the informati...

Page 228 - Figure 6-17 Wireless Advanced; Fragmentation Threshold -

TL-MR3020 Portable 3G/4G Wireless N Router 6.6.4 Wireless Advanced Selecting Wireless > Wireless Advanced will allow you to do some advanced settings for the device in the following screen shown in Figure 6-17. As the configuration for each operation mode is almost the same, we take Access Point ...

Page 229 - Figure 6-18 Statistics of the device attached wireless stations

TL-MR3020 Portable 3G/4G Wireless N Router ¾ Enable AP Isolation - Isolates all connected wireless stations so that wireless stations cannot access each other through WLAN. This function will be disabled if WDS/Bridge is enabled. 6.6.5 Wireless Statistics Selecting Wireless > Wireless Statistics ...

Page 230 - Figure 6-19 The DHCP menu

TL-MR3020 Portable 3G/4G Wireless N Router management and allows new wireless devices to receive IP addresses automatically without the need to manually assign new IP addresses. There are three submenus under the DHCP menu (shown as Figure 6-19): DHCP Settings , DHCP Clients List and Address Reserva...

Page 231 - the device reboots.; DHCP; Figure 6-21 DHCP Clients List

TL-MR3020 Portable 3G/4G Wireless N Router ¾ End IP Address - This field specifies the last address in the IP Address pool. 192.168.0.199 is the default end IP address. ¾ Address Lease Time - Enter the amount of time for the PC to connect to the AP with its current assigned dynamic IP address. The t...

Page 232 - Figure 6-22 Address Reservation

TL-MR3020 Portable 3G/4G Wireless N Router ¾ MAC Address - Here displays the MAC address of the DHCP client. ¾ Assigned IP - Here displays the IP address that the AP has allocated to the DHCP client. ¾ Lease Time - Here displays the time of the DHCP client leased. Before the time is up, DHCP client ...

Page 233 - The changes won't take effect until the device reboots.; Figure 6-23 The System Tools menu

TL-MR3020 Portable 3G/4G Wireless N Router Click Next to go to the next page and Click Previous to return the previous page. ) Note: The changes won't take effect until the device reboots. 6.8 System Tools System Tools option helps you to optimize the configuration of your device. SNMP can help you ...

Page 234 - Figure 6-24 Time settings

TL-MR3020 Portable 3G/4G Wireless N Router Figure 6-24 Time settings ¾ Time Zone - Select your local time zone from this pull down list. ¾ Date - Enter your local date in MM/DD/YY into the right blanks. ¾ Time - Enter your local time in HH/MM/SS into the right blanks. ¾ NTP Server I / NTP Server II ...

Page 235 - Figure 6-25 Time settings

TL-MR3020 Portable 3G/4G Wireless N Router To set time automatically: 1. Select your local time zone. 2. Enter the address or domain of the NTP Server I or NTP Server II . 3. Click the Get GMT button to get system time from Internet if you have connected to the Internet. To set Daylight Saving: 1. C...

Page 237 - Figure 6-28 Firmware Upgrade

TL-MR3020 Portable 3G/4G Wireless N Router The Diagnostic Results page displays the result of diagnosis. If the result is similar to the following screen, the connectivity of the Internet is fine. Figure 6-27 Diagnostic Results ) Note: 1) Only one user can use the diagnostic tools at one time. 2) &#...

Page 238 - Figure 6-29 Restore Factory Default

TL-MR3020 Portable 3G/4G Wireless N Router ) Note: 1) New firmware versions are posted at http://www.tp-link.com and can be downloaded for free. There is no need to upgrade the firmware unless the new firmware has a new feature you want to use. However, when experiencing problems caused by the Route...

Page 239 - Figure 6-30 Backup & Restore Configuration

TL-MR3020 Portable 3G/4G Wireless N Router Figure 6-30 Backup & Restore Configuration ¾ Click the Backup button to save all configuration settings as a backup file in your local computer. ¾ To upgrade the Router's configuration, follow these instructions. • Click the Browse button to find the co...

Page 240 - Figure 6-32 Password

TL-MR3020 Portable 3G/4G Wireless N Router 6.8.7 Password Choose menu “ System Tools → Password ”, and then you can change the factory default user name and password of the Router in the next screen as shown in Figure 6-32. Figure 6-32 Password It is strongly recommended that you should change the f...

Page 241 - Figure 6-33 System Log

TL-MR3020 Portable 3G/4G Wireless N Router Figure 6-33 System Log ¾ Log Type - By selecting the log type, only logs of this type will be shown. ¾ Log Level - By selecting the log level, only logs of this level will be shown. ¾ Refresh - Refresh the page to show the latest log list. ¾ Save Log - Clic...

Page 242 - Figure 6-35 Statistics

TL-MR3020 Portable 3G/4G Wireless N Router ¾ Standard AP - In this mode, the device enables multiusers to access, and provides several wireless modes, such as AP, Client, Repeater and so on. ¾ 3G/4G Router - In this mode, the device enables multiusers to share Internet via ADSL/Cable Modem. The wire...

Page 246 - Figure A-4 Virtual Servers; Forwarding; ” menu on the left; DMZ; radio

TL-MR3020 Portable 3G/4G Wireless N Router Figure A-4 Virtual Servers Figure A-5 Add or Modify a Virtual server Entry ) Note: Your opposite side should call your WAN IP, which is displayed on the “Status” page. 4) How to enable DMZ Host: Log in to the Router, click the “ Forwarding ” menu on the lef...

Page 248 - (the Router’s LAN IP address: Web Management Port) in the address

TL-MR3020 Portable 3G/4G Wireless N Router ) Note: If the above configuration takes effect, to configure to the Router by typing http://192.168.0.254:88 (the Router’s LAN IP address: Web Management Port) in the address field of the Web browser. 3) Log in to the Router, click the “ Forwarding ” menu ...

Page 249 - Address of your wireless stations.

TL-MR3020 Portable 3G/4G Wireless N Router 4) If the wireless connection is ready, but you can’t access the Router, check the IP Address of your wireless stations. -238-

Page 250 - Appendix B: Configuring the PCs

TL-MR3020 Portable 3G/4G Wireless N Router Appendix B: Configuring the PCs In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP. First make sure your Ethernet Adapter is working, refer to the adapter’s manual if needed. 1. Install TCP/IP component 1) On th...

Page 252 - Select

TL-MR3020 Portable 3G/4G Wireless N Router Figure B-0-3 ¾ Setting IP address manually 1 Select Use the following IP address radio button, and the following items are available. If the Router's LAN IP address is 192.168.0.254, type 192.168.0.x (x is from 1 to 253) into the IP address field and 255.25...

Page 253 - Now click; OK; to keep your settings.

TL-MR3020 Portable 3G/4G Wireless N Router Figure B-0-4 Now click OK to keep your settings. -242-

Page 254 - Appendix C: Specifications; General

TL-MR3020 Portable 3G/4G Wireless N Router Appendix C: Specifications General Standards IEEE 802.3, 802.3u, 802.11b, 802.11g and 802.11n Protocols TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP Ports One 10/100M Auto-Negotiation LAN/WAN RJ45 port 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568...

Page 255 - Appendix D: Glossary

TL-MR3020 Portable 3G/4G Wireless N Router Appendix D: Glossary ¾ 802.11n - 802.11n builds upon previous 802.11 standards by adding MIMO (multiple-input multiple-output). MIMO uses multiple transmitter and receiver antennas to allow for increased data throughput via spatial multiplexing and increase...

Page 257 - FlyingAngel HSUPA

TL-MR3020 Portable 3G/4G Wireless N Router Appendix E: Compatible 3G/4G USB Modem The UMTS/HSPA/EVDO USB modems we’ve tested in the field are listed below. You can find the latest compatibility list in our website: http://www.tp-link.com. Compatible 3G/4G USB Modem (Tested in the field) HUAWEI E122,...

Page 258 - EVERYWEB HSUPA

TL-MR3020 Portable 3G/4G Wireless N Router E-TOUCH WM78 GLBETRTTER GI0452 HAIER CE100, OLIVE VME110, WM200 HSDC Hsdc-03 MWALKER MBD-100HU MYWAVE FW2012T OPTION iCon 401 PANTECH PX500 QISDA H21 SIERRA WIRELESS AC306, AirCard 881U, Compass 885U, Compass 889, AirCard313U (4G) SPRINT U600 TELSEY EVERYWE...