TP-Link TD-W8951NB - Manuals

Page 2 - COPYRIGHT & TRADEMARKS; Specifications are subject to change without notice.

COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form ...

Page 3 - FCC STATEMENT; Reorient or relocate the receiving antenna.; FCC RF Radiation Exposure Statement

FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses a...

Page 4 - 당해

CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. This device has been designed to operate with the antennas listed below, and having a maximum gain of 5dBi. Antennas not ...

Page 5 - Safety Information

NCC Notice: 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та ви...

Page 6 - DECLARATION OF CONFORMITY; For the following equipment:; The product carries the CE Mark:; Person responsible for marking this declaration:; Yang Hongliang

TP-LINK TECHNOLOGIES CO., LTD TP-LINK TECHNOLOGIES CO., LTD. Building 24 (floors 1, 3, 4, 5), and 28 (floors 1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China DECLARATION OF CONFORMITY For the following equipment: Product Description: 150Mbps Wireless N ADSL2+ Modem Rout...

Page 7 - CONTENTS

CONTENTS Package Contents .................................................................................................... 1 Chapter 1. Introduction......................................................................................... 2 1.1 Product Overview ......................................

Page 9 - Package Contents; The following contents should be found in your package:

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 1 Package Contents The following contents should be found in your package: ¾ One TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) ¾ One Power Adapter for TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) ¾ Qu...

Page 10 - Chapter 1. Introduction; Product Overview; ADSL

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 2 Chapter 1. Introduction Thank you for choosing the TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) . 1.1 Product Overview The device is designed to provide a simple and cost-effective ADSL Internet connection for a ...

Page 12 - Chapter 2. Hardware Installation; The Front Panel; Name

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 4 Chapter 2. Hardware Installation 2.1 The Front Panel Figure 2-1 The LEDs locate on the front panel. They indicate the device’s working status. For details, please refer to LED Explanation. LED Explanation: Name Status Indicatio...

Page 13 - the Modem Router; please refer to; POWER; : The Power plug is where you will connect the power adapter.; WPS; : This button is for WPS settings. For details, please refer to; RESET; : There are two ways to reset the Router's factory defaults.; Method one

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 5 ) Note: 1. If the ADSL LED is off, please check your Internet connection first. Refer to 2.4 Connecting the Modem Router for more information about how to make Internet connection correctly. If you have already made a right con...

Page 14 - Connecting the Modem; Antenna; Installation Environment

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 6 least 5 seconds. And the Router will reboot to its factory default settings. Method two : Restore the default setting from “Maintenance-SysRestart” of the Router's Web-based Utility. ¾ WiFi : Press this button to enable or disa...

Page 15 - Connecting the Modem Router; Connect the ADSL Line.; Method two; • LINE: Connect to the wall jack

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 7 Figure 2-3 Wall-mount Install ) Note: The diameter of the screw, 3.5mm<D<7.8mm, and the distance of two screws is 107.5mm. The screw that project from the wall need around 4mm based, and the length of the screw need to be...

Page 17 - Chapter 3. Quick Installation Guide; Click the; Start; menu on your desktop, right click; My Network Places; Right click; Local Area Connection

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 9 Chapter 3. Quick Installation Guide 3.1 Configure PC After you directly connect your PC to the TD-W8951NB or connect your adapter to a Hub/Switch which has connected to the Router, you need to configure your PC’s IP address. Fo...

Page 18 - Select; General

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 10 Figure 3-2 Step 3: Select General tab, highlight Internet Protocol (TCP/IP), and then click the Properties button. Figure 3-3

Page 21 - Select the; Quick Start; Configure the time for the Router, and then click the; NEXT; Select the connection type to connect to the ISP (We select; NEXT

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 13 Figure 3-7 Step 1: Select the Quick Start tab, then click RUN WIZARD , and you will see the next screen. Click the NEXT button. Figure 3-8 Step 2: Configure the time for the Router, and then click the NEXT button. Figure 3-9 S...

Page 23 - Click; to finish the Quick Start.

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 15 Figure 3-12 ) Note: If the Access Point is activated, the wireless function will be available even without the external antenna because of an additional printed antenna. To adopt the wireless security protection measures, plea...

Page 24 - Chapter 4. Software Configuration; Choose “

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 16 Chapter 4. Software Configuration This User Guide recommends using the “Quick Installation Guide” for first-time installation. For advanced users, if you want to know more about this device and make use of its functions adequa...

Page 25 - Status; ” menu, and you will be able to query the logs of the Router.

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 17 Figure 4-2 ) Note: Click the other submenus System Log or Statistics in Figure 4-2, and you will be able to view the system log and traffic statistics about the Router. 4.1.2 System Log Choose “ Status → System Log ” menu, and...

Page 28 - WLAN

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 20 ¾ Select ADSL , and you will see the statistics table as below. Statistics Table: Transmit total PDUs The total PDUs transmitted over the ADSL port. Transmit Statistics Transmit total Error Counts The total errors occurred ove...

Page 29 - Interface Setup

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 21 4.3 Interface Setup Choose “ Interface Setup ”, you can see the next submenus: Internet , LAN and Wireless . Figure 4-5 Click any of them, and you will be able to configure the corresponding function. 4.3.1 Internet Choose “ I...

Page 35 - Yes; After you finish the Internet configuration, please click; SAVE; to make the settings take effect.; Interface Setup

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 27 automatically. And once there is traffic send or receive, the connection will be automatically on. ¾ Static/Dynamic IP Address: For PPPoA/PPPoE connection, you need to specify the public IP address for this ADSL Router. The IP...

Page 38 - If; Use Auto Discovered DNS Server Only; is selected in DNS Relay, this router will accept the; Use User Discovered DNS Server Only; is selected in

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 30 be able to obtain IP address automatically although the DHCP function is enabled. All the ports are checked by default. ¾ DHCP Table : The information of the DHCP clients will be displayed here • Hostname: Display the name of ...

Page 39 - DHCP Server IP for Relay Agent:; Enter the DHCP server IP Address runs on WAN; Disabled; , the DHCP function will not take effect.; ” menu, and you will see the Wireless screen (shown in

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 31 Figure 4-13 • DHCP Server IP for Relay Agent: Enter the DHCP server IP Address runs on WAN side. ) Note: If you select Disabled , the DHCP function will not take effect. 4.3.3 Wireless Choose “ Interface Setup → Wireless ” men...

Page 41 - Access point Settings:; These are the settings of the access point. You can configure the; Fragmentation Threshold:; This value specifies the maximum size for a packet before

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 33 ¾ Access point Settings: These are the settings of the access point. You can configure the rules to allow wireless-equipped computers and other devices to communicate with a wireless network. • Access point: Select Activated t...

Page 47 - Finish; to complete the WPS

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 39 The WPS Configuration Screen of Wireless Adapter Step 3: Wait for a while until the next screen appears. Click Finish to complete the WPS configuration. The WPS Configuration Screen of Wireless Adapter

Page 51 - Advanced Setup; ” menu, and you will see the routing information in the next; ADD ROUTE

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 43 Figure 4-25 ¾ Firewall: Select this option can automatically detect and block Denial of Service (DoS) attacks, such as Ping of Death, SYN Flood, Port Scan and Land Attack. ¾ SPI: If you enable SPI, all traffics initiated from ...

Page 52 - Destination IP Address:; This parameter specifies the IP network address of the final

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 44 ¾ Destination IP Address: This parameter specifies the IP network address of the final destination. ¾ IP Subnet Mask: Enter the subnet mask for this destination. ¾ Gateway IP Address: Enter the IP address of the gateway. The g...

Page 55 - IP Address Mapping is only available for VCs with Multiple IPs.

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 47 Click the BACK button to return to the previous screen. Click the CANCEL button to cancel the configuration which is made just now. 4.4.3.3 IP Address Mapping Select Multiple for numbers of IPs in Figure 4-28, and choose “ Adv...

Page 59 - ”, you can activate the VLAN function in the next screen.; ) Assign VLAN PVID for each Interface; Assign VLAN PVID for each Interface; in Figure 4-33, you can assign the PVID for each

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 51 4.4.5 VLAN Choose “ Advanced Setup → VLAN ”, you can activate the VLAN function in the next screen. Virtual LAN (VLAN) is a group of devices on one or more LANs that are configured so that they can communicate as if they were ...

Page 60 - ) Define VLAN Group; Define VLAN Group; in Figure 4-33, you can define VLAN groups in the next screen (shown

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 52 Figure 4-34 ¾ PVID: Each physical port has a default VID called PVID (Port VID). PVID is assigned to untagged frames or priority tagged frames (frames with null (0) VID) received on this port. 2) Define VLAN Group Click Define...

Page 62 - Access Management; Access Management

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 54 Figure 4-36 ¾ ADSL Mode: Select the ADSL operation mode which your ADSL connection uses. ¾ ADSL Type: Select the ADSL operation type which your ADSL connection uses. 4.5 Access Management Choose “ Access Management ”, you can ...

Page 66 - IP/MAC Filter Set Index; and; IP/MAC Filter Rule Index; If you want to make the rule take effect, please select; to active the rule.

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 58 as follows. Presume the rules are both aimed at the interface PVC0, and their indexes are (1, 1), (1, 2) and (1, 3). Step 1: Select the “IP/MAC Filter” as the Filter Type Selection (show in Figure 4-39). Select the “IP” as the...

Page 73 - ”, you can configure the DDNS function in the screen; DDNS; Activate the DDNS function or not.

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 65 Figure 4-44 ¾ UPnP: Activate or Deactivate the UPnP function. Only when the function is activated, can the UPnP take effect. ¾ Auto-Configure: If you activate the function, then the UPnP network devices can automatically confi...

Page 77 - Manually; Maintenance; ”, you can upgrade the firmware of the Router in the screen; Browse; to find the local hard drive and locate the firmware or romfile

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 69 Figure 4-50 3) Manually Select Manually as the Synchronize time, you need to set the date and time corresponding to the current time. Figure 4-51 4.6.3 Firmware Choose “ Maintenance → Firmware ”, you can upgrade the firmware o...

Page 79 - To restore the Router’s settings:; “New Romfile Location” field.; UPGRADE; button to complete.

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 71 Figure 4-53 Step 2: Save the file as the appointed file (shown in Figure 4-54). TD-W8951NB Figure 4-54 To restore the Router’s settings: Step 1: Click the Browse button to locate the update file for the device, or enter the ex...

Page 80 - ”, you can select to restart the device with current settings or; ”, you can view the test results for the connectivity of the

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 72 4.6.4 SysRestart Choose “ Maintenance → SysRestart ”, you can select to restart the device with current settings or restore to factory default settings in the screen (shown in Figure 4-55). Figure 4-55 4.6.5 Diagnostics Choose...

Page 81 - Help

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 73 Figure 4-56 4.7 Help Choose “ Help ”, you can view the help information for configuration of any function.

Page 83 - Appendix A: Specifications

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 75 Appendix A: Specifications General Standards and Protocols ANSI T1.413, ITU G.992.1, ITU G.992.2, ITU G.992.3, ITU G.992.5, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u, TCP/IP, PPPoA, PPPoE, SNTP, HTTP, D...

Page 84 - Appendix B: Troubleshooting; Note; T2. What can I do if I don’t know or forget my password?

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 76 Appendix B: Troubleshooting T1. How do I restore my Modem Router’s configuration to its factory default settings? With the Modem Router powered on, press and hold the RESET button on the rear panel for 8 to 10 seconds before r...

Page 85 - Change adapter; Properties

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 77 Click Change adapter settings Click Properties Right-click Local Area Connection

Page 86 - Internet; Obtain an IP; Obtain DNS; OK

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 78 Double-click Internet Protocol Version 4 (TCP/IPv4) Select Obtain an IP address automatically Select Obtain DNS server address automatically Click OK

Page 92 - T4. What can I do if I cannot access the Internet?

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 84 2) Configure your IE browser Open your IE browser, click Tools tab and you will see the following screen. Click Internet Options Click OK Select Never dial a connection Now, try to log on to the Web-based configuration page ag...

Page 94 - Appendix C: Technical Support; Technical Support

TD-W8951NB 150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide 86 Appendix C: Technical Support Technical Support For more troubleshooting help, go to: http://www.tp-link.com/en/support/faq To download the latest Firmware, Driver, Utility and User Guide, go to: http://www.tp-link.com/en/...