Page 2 - COPYRIGHT & TRADEMARKS; Specifications are subject to change without notice.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form ...
Page 3 - FCC STATEMENT; cause undesired operation.; CE Mark Warning; which case the user may be required to take adequate measures.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. Thi...
Page 4 - Package Contents; ) The provided power cord may be different due to; local power specifications; or missing, please contact with your distributor.; Conventions
Package Contents The following items should be found in your box: ¾ One TL-R470T+ Load Balance Broadband Router ¾ One power cord for TL-R470T+ Load Balance Broadband Router ¾ One Resource CD for TL-R470T+ Load Balance Broadband Router, including: • This User Guide • Other Helpful Information ) Note:...
Page 5 - CONTENTS
CONTENTS Chapter 1. Introduction ........................................................................................ 1 1.1 Overview of the Router .................................................................................................. 1 1.2 Features.............................
Page 7 - Load Balance Broadband Router User Guide; Chapter 1. Introduction; Overview of the Router
TL-R470T+ Load Balance Broadband Router User Guide 1 Chapter 1. Introduction Thank you for choosing TL-R470T+ Load Balance Broadband Router! 1.1 Overview of the Router The TL-R470T+ Load Balance Broadband Router possesses excellent throughput and driving load capability, which consumedly meets the r...
Page 9 - Chapter 2. Hardware installation
TL-R470T+ Load Balance Broadband Router User Guide Chapter 2. Hardware installation 2.1 Panel Layout 2.1.1 The Front Panel The Router’s LEDs are located on the front panel (View from left to right). Figure 2-1 LED Descriptions: Name Status Indication Not lit The router is power off. PWR Lit up (Gree...
Page 10 - Ensure the router is powered on before it restarts completely.; System Requirements; shock from lightning.; Connect to Ground
TL-R470T+ Load Balance Broadband Router User Guide 4 Method two: With the router powered on, use a pin to press and hold the Reset button (about 5 seconds) until the SYS LED lights up and flashes. And then release the button and wait the router to reboot to its factory default settings. ) Note: Ensu...
Page 11 - The Router can be grounded via the PE; Connecting the Router; and keep your hands dry.
TL-R470T+ Load Balance Broadband Router User Guide 5 Connecting to the Ground via the power supply The Router can be grounded via the PE （ Protecting Earth ） cable of the AC power supply as shown in the following figure. ) Note: If you intend to connect the Router to the ground via the PE （ Protecti...
Page 12 - the
TL-R470T+ Load Balance Broadband Router User Guide 6 2. Connect the PC(s) and all Switches/Hubs on your LAN to the LAN Ports on the router, shown in figure 2-3. 3. Connect the DSL/Cable modem to the WAN port on the router, shown in figure 2-3. 4. Connect the AC power adapter to the AC power socket o...
Page 13 - Chapter 3. Quick Installation Guide; immediately after it has been successfully configured.; Start; menu on your desktop, right click; My Network Places; In the next screen, right click; Local Area Connection
TL-R470T+ Load Balance Broadband Router User Guide Chapter 3. Quick Installation Guide After connecting the TL-R470T+ router into your network, you should configure it. This chapter describes how to configure the basic functions of your TL-R470T+ Load Balance Broadband Router. These procedures only ...
Page 14 - In the next screen, select; General; click the; Properties
TL-R470T+ Load Balance Broadband Router User Guide 8 Figure 3-2 Step 3: In the next screen, select General tab, highlight Internet Protocol (TCP/IP), and then click the Properties button. Figure 3-3
Page 15 - Configure the IP address as shown in Figure 3-4. After that, click; OK; You can c; Obtain an IP address; ” and “; Obtain DNS server address automatically; ” in the screen above. For; menu on your desktop, select; run; in the field, and then type; Enter
TL-R470T+ Load Balance Broadband Router User Guide 9 Step 4: Configure the IP address as shown in Figure 3-4. After that, click OK . Figure 3-4 ) Note: You can c onfigure the PC to get an IP address automatically, select “ Obtain an IP address automatically ” and “ Obtain DNS server address automati...
Page 17 - that appears, cancel the; Quick Setup
TL-R470T+ Load Balance Broadband Router User Guide 11 Figure 3-7 ) Note: If the above screen (Figure 3-7) does not prompt, it means that your web-browser may be set to a proxy. Choose Tools menu → Internet Options → Connections → LAN Settings , in the screen that appears, cancel the Using Proxy chec...
Page 19 - Chapter 4. Configuring the Router; Save; Choose “; Status
TL-R470T+ Load Balance Broadband Router User Guide 13 Chapter 4. Configuring the Router This User Guide recommends using the “Quick Installation Guide” for first-time installation. For advanced users, if you want to know more about this device and make use of its functions adequately, you need to re...
Page 20 - Figure; LAN; “IP address” and “Subnet Mask”.; Network; ” page. Dual WAN ports; Disconnect; button will be
TL-R470T+ Load Balance Broadband Router User Guide 14 Figure 4-1 ¾ LAN - This field displays the current information for the LAN, including the “MAC address”, “IP address” and “Subnet Mask”. ¾ WAN - This field displays the parameters applied to the WAN ports of the router, including “MAC address”, “...
Page 21 - button. If you have not connected to the Internet, a; Connect; button will be shown, and you can
TL-R470T+ Load Balance Broadband Router User Guide 15 button. If you have not connected to the Internet, a Connect button will be shown, and you can then establish the connection by clicking the button. ¾ Traffic Statistics: This field displays the traffic statistics of WAN ports. ¾ System Up Time: ...
Page 22 - WAN Number; Choose menu “; ”, you can configure the IP parameters of the LAN on the screen; MAC Address
TL-R470T+ Load Balance Broadband Router User Guide 16 Figure 4-3 ¾ WAN Number – Here allows you to select the total number of WAN ports at your need. And the Router will adjust the physical ports accordingly, which can be illustrated on the following port sketch. ) Note: 1) By default, TL-R470T+ is ...
Page 24 - MTU Size; If your ISP gives you one or two DNS addresses, select; Use These DNS Servers; and enter the primary and secondary addresses into the correct
TL-R470T+ Load Balance Broadband Router User Guide 18 Figure 4-5 ¾ WAN Port: Here allows you to select the WAN port to configure. ¾ Interior network: When the WAN is connecting with a LAN, you can select the option, and enter the LAN IP addresses in the field, then the WAN port will only transmit th...
Page 35 - to restore the MAC address of WAN port to the factory; MAC Address Clone; ) After you finish the configuration, click the; button, and the router will prompt you to
TL-R470T+ Load Balance Broadband Router User Guide 29 ¾ DNS Server IP Address - Enter the correct DNS IP address that really existed on the WAN network. For example: 202.96.134.133. 4.3.5 MAC Clone Choose menu “ Network → MAC Clone ”, you can configure the MAC address of the WAN on the screen below ...
Page 37 - The; Intelligent Balance; mode will only be effective until the; Ingress Bandwidth; of the WAN port; In; Manual Balance
TL-R470T+ Load Balance Broadband Router User Guide 31 ) Note: The Intelligent Balance mode will only be effective until the Ingress Bandwidth of the WAN port has been set in “ Network → WAN ” screen. ¾ Manual Balance - In Manual Balance mode, the traffic will be transmitted to the WAN port according...
Page 38 - How to set an extra IP address dispatch rule?
TL-R470T+ Load Balance Broadband Router User Guide 32 • Current - Current flow usage of each WAN port. ¾ Current Statistics / Overall Statistics- Here displays the information about the router's traffic status of WAN ports. When finished, click the Save button to apply your settings. Click the Refre...
Page 40 - - Obliged timeouts for the entries in; button to apply your settings.
TL-R470T+ Load Balance Broadband Router User Guide 34 Figure 4-15 ¾ On Existed-IP-Pair - If host A in LAN has connected to host B in WAN, then all the packages coming from host A to host B will be forwarded by the same WAN port. • Age for IP-Pairs-Table - Normal timeouts for the entries in IP-Pairs-...
Page 44 - ) If you want to add more than one reserved IP, please go to
TL-R470T+ Load Balance Broadband Router User Guide 38 ¾ Assigned IP Address - This field displays the IP address of the router reserved. ¾ Status - This field displays the status of the virtual server entry. Enabled means that the entry will take effect, Disabled means that the entry will not take e...
Page 46 - System Tools –> Remote Management; screen to be any value except 80 such as 8080. Or else
TL-R470T+ Load Balance Broadband Router User Guide 40 configure the IP address for the virtual server; If the “ Common Service Port ” does not contain the service that you want, please configure the Service Port, IP Address and Protocol manually. Figure 4-24 Step 3: After that, select Enable to make...
Page 58 - Scan Attack Defence
TL-R470T+ Load Balance Broadband Router User Guide 52 Figure 4-41 ¾ Region - This option used to select the specifically area from which the packets will be monitored by the next settings. ¾ Scan Attack Defence • IP Scan: During the specific time, if a computer (identified by a particular source IP ...
Page 59 - This means during a second, when the Region is LAN, if a source IP
TL-R470T+ Load Balance Broadband Router User Guide 53 IP address) ten different ports, then the source IP address will be deemed to make Port Attacks. And the Router will start up the blocking function immediately. • IP Snoop - If you select this option, the Router will monitor whether the packets f...
Page 61 - If you want to add more than one static route, please go to
TL-R470T+ Load Balance Broadband Router User Guide 55 Figure 4-42 ¾ Destination IP Address - The “Destination IP Address” is the address of the network or host that you want to assign to a static route. ¾ Subnet Mask - The “Subnet Mask” determines which portion of an IP address is the network portio...
Page 63 - You can click the; Refresh; to update the information.; QoS
TL-R470T+ Load Balance Broadband Router User Guide 57 Step 2: Enter the appropriate LAN IP Address, Max Session and then select the status. Figure 4-46 Step 3: Click the Save button. 4.8.2 Session List Choose menu “ Session Limit → Session List ”, you can view the information about the number of con...
Page 67 - You can click “to page” to edit the entry in the corresponding screen.
TL-R470T+ Load Balance Broadband Router User Guide 61 Step 4: Click Back to return the previous screen. ) Note: You can click “to page” to edit the entry in the corresponding screen. Other configurations for the entries as shown in Figure 4-53 : Click the Delete button to delete the entry. Click the...
Page 69 - Connection Status; Connection Status
TL-R470T+ Load Balance Broadband Router User Guide 63 Step 4: Enable DDNS, and click Save to save the current configuration. Click Login to login the DDNS service. Click Logout to logout the DDNS service. The status of the DDNS service connection is displayed in the Connection Status field. 4.11.2 P...
Page 71 - Switch Settings
TL-R470T+ Load Balance Broadband Router User Guide 65 Figure 4-60 To set up for No-IP DDNS, follow these instructions: Step 1 Select the WAN port to configure. Step 2 Type the “ User Name ” and “ Password ” for your DDNS account. Step 3 Enter the Domain Name your dynamic DNS service provider offered...
Page 72 - Before you view the information, please click the; button to update it.; Switch Settings
TL-R470T+ Load Balance Broadband Router User Guide 66 4.12.1 Port Statistics Choose menu “ Switch Settings → Port statistics ”, you can view the statistics information about the LAN port in the next screen (shown in Figure 4-62). Figure 4-62 ) Note: Before you view the information, please click the ...
Page 74 - Click the; button, the information in the table above will be updated.
TL-R470T+ Load Balance Broadband Router User Guide 68 Figure 4-65 ¾ Port - Here displays the Router's LAN Disabled. Enabled (default status) means the abled means the Flow Control f Duplex, 10M Full Duplex, 4.12.5 Port Status Settings → Port Status ”, you can view the status of the LAN port in the P...
Page 77 - on these functions will not take effect.
TL-R470T+ Load Balance Broadband Router User Guide 71 Step 2: Click the Get GMT button to get system time from Internet if you have connected to the Internet. Step 3: Click Save to save the configuration. ) Note: 1) This setting will be used for some time-based functions such as firewall. You must s...
Page 78 - ) New firmware versions are posted at
TL-R470T+ Load Balance Broadband Router User Guide 72 ¾ Ping Timeout - Indicates the time before the Ping timeout. ¾ Tracert Hops – Specify the maximum hops of the Tracert here. Click Start to start the test and the result will display in the Diagnostic Result table. ) Note: 1). Only one user can us...
Page 79 - User Name; default; Password; default; IP Address; default; Subnet Mask
TL-R470T+ Load Balance Broadband Router User Guide 73 4.13.4 Factory Defaults Choose menu “ System Tools → Factory Defaults ”, you can restore the configurations of the Router to factory defaults on the screen (shown in Figure 4-71). Figure 4-71 Click the Restore button to reset all configuration se...
Page 81 - ) Static address assignment of DHCP server.
TL-R470T+ Load Balance Broadband Router User Guide 75 4.13.6 Reboot Choose menu “ System Tools → Reboot ”, click the Reboot button to reboot the router via the next screen. Figure 4-75 ) Note: Some settings of the router will take effect only after rebooting, which include: 1) Change LAN IP Address....
Page 82 - for the router's user name and password.; Clean All; button to clean all the configurations.
TL-R470T+ Load Balance Broadband Router User Guide 76 ) Note: 1) It is strongly recommended that you change the factory default user name and password of the router. All users who try to access the router's web-based utility will be prompted for the router's user name and password. 2) The new user n...
Page 83 - you use is 8080, please enter
TL-R470T+ Load Balance Broadband Router User Guide 77 ¾ Web Management Port - Web browser access normally uses the standard HTTP service port 80. This router’s default remote management web port number is 80. For greater security, you can change the remote management web interface to a custom port b...
Page 86 - Appendix A: Specifications
TL-R470T+ Load Balance Broadband Router User Guide 80 Appendix A: Specifications General Standards and Protocols IEEE 802.3, 802.3u TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP,HTTP,DNS Safety & Emission FCC 、 CE Ports One 10/100M Auto-Negotiation WAN RJ45 port Three adjustable WAN/LAN ports One 10/100M...
Page 87 - Appendix B: Preventing Lightning; from lightning better, the following should be considered:
TL-R470T+ Load Balance Broadband Router User Guide 81 Appendix B: Preventing Lightning To avoid damage during a lightning storm and ensure a stable performance, our router has adopted the professional lightning protection technology to prevent the lightning. However, although these measures have bee...
Page 90 - Login to the router, click the menu
TL-R470T+ Load Balance Broadband Router User Guide 84 Figure C-4 ) Note: Your opposite side should call your WAN IP, which is displayed on the “Status” page. Method two: Use DMZ Host Login to the router, click the menu Forwarding → DMZ . On the DMZ screen, select “Enable”, and enter your IP address ...
Page 91 - To add a WEB Server: Login to the router, click the menu; Forwarding; shown in the next screen: configure “80” as the “; Service Port; ”, and enter your IP; Enable
TL-R470T+ Load Balance Broadband Router User Guide 85 Figure C-6 ) Note: If the above configuration takes effect, you should login the Router by entering http://192.168.0.1:88 (the router’s LAN IP address: Web Management Port) in the address field of the web browser. Step 2: To add a WEB Server: Log...
Page 92 - Appendix D: Glossary
TL-R470T+ Load Balance Broadband Router User Guide 86 Appendix D: Glossary ¾ DDNS ( D ynamic D omain N ame S ystem) - The capability of assigning a fixed host and domain name to a dynamic Internet IP address. ¾ DHCP ( D ynamic H ost C onfiguration P rotocol) - A protocol that automatically configure...
