TP-Link TL-PS310U - Manual - manualsarea.com

Page 3 - III; CONTENTS; APPENDIX

III CONTENTS 1 INTRODUCTION.......................................................................................................... 1 1.1 Product Overview ...................................................................................................... 1 1.2 Network Management ..................

Page 4 - Introduction; Product Overview; indicate USB status; Hardware Installation

1 1 Introduction 1.1 Product Overview MFP and Storage Server enhance capability by letting you place your USB devices at convenient locations directly on the Ethernet network. It’s designed to connect your USB printers, MFP and USB storage devices to your network, allowing all network users access t...

Page 5 - and Storage Server is correctly connected to the network.; The Software Installation; the

2 2) Connect the MFP and Storage Server to the router or switch/HUB with the Ethernet cable. 3) Connect the power adapter to the MFP and Storage Server. When the Link LED lights up, the MFP and Storage Server is correctly connected to the network. 2 The Software Installation 2.1 For Windows 2000/XP ...

Page 6 - Finish; ” to close the installation wizard.

3 3) Choose your operating system to install all software programs. 4) When the installation completed, click “ Finish ” to close the installation wizard.

Page 8 - Search; ” button to refresh the list.

5 2.1.1 Connecting to an USB Device a) Connect the USB cable on your USB device to the USB port of the MFP and Storage Server, and make sure both the USB device and the MFP and Storage Server are powered on. The USB device will then show up on the MFP and Storage Server utility as a green icon. The ...

Page 9 - Connect; ” button at the bottom.

6 b) Select the USB device that you will want to connect and click on the “ Connect ” button at the bottom. Note: If your USB device does not show up on the list, please try to disconnect and reconnect the USB device to the USB port of the MFP and Storage Server. Also, please make sure the MFP and S...

Page 11 - Connecting to an USB Printer or Multi-functional Printer

8 2.1.2 Connecting to an USB Printer or Multi-functional Printer a) Connect the USB cable on your printer or multi-functional printer to the MFP and Storage Server and make sure your printer is powered on. You will then see the connected printer show up in the MFP and Storage Server setup utility. S...

Page 14 - Storage Server setup utility, and press the “; Disconnect; ” button. The device will then no longer stay

11 2.1.4 Disconnecting an USB Device a) To disconnect an USB device, simply click on the connected USB device on the list of the MFP and Storage Server setup utility, and press the “ Disconnect ” button. The device will then no longer stay connected to your computer, however, you may reconnect the U...

Page 16 - Request Disconnect

13 b) To send the courteous message, right-click on the USB device and select “ Request Disconnect ”. A message will then be sent to the user requesting that they disconnect from the USB device.

Page 19 - Setting the MFP and Storage Server by Setup Utility; and select “

16 2.1.6 Setting the Polling Interval a) The polling interval will allow the setup utility to pull information from your network to find out the status of all connected MFP and Storage Server and USB devices. To configure the polling interval, in the utility, click on File -> Settings -> Polli...

Page 21 - For Windows Vista Users

18 2.2 For Windows Vista Users 1) Insert the setup CD into your CD-drive. The auto-run program will be started. 2) Click the TL-PS310U to begin the setup. 3) Choose your operating system to install all software programs.

Page 22 - ” to complete the installation process.

19 4) During the driver installation, a Windows Vista security message will appear. Select “ Install this driver software anyway ” to continue. 5) Click on “ Finish ” to complete the installation process.

Page 23 - please choice “Unblock”.

20 6) Once the installation process has been completed, an “Launch MFP and Storage Server” icon will be shown on Desktop. 7) Double click on it for the first time execution. Windows Vista will pop up a firewall setup window, please choice “Unblock”. 8) After finishing Firewall setup, MFP and Storage...

Page 26 - WEB Management Interface; WEB Page Description

22 3 WEB Management Interface 3.1 For Windows 2000/XP/Vista Users To Access WEB management interface in Windows 2000/XP/Vista, in the MFP and Storage Server setup utility, select the “TL-PS310U-2B5111(192.168.0.10)” and double click, OS will open the browser automatically and load the management web...

Page 28 - Disable; DHCP in the “; DHCP Setting; ” button to reboot the MFP and Storage Server.

24 Setup: You can add or change any existing password on the MFP and Storage Server in this window. By default, the MFP and Storage Server does not come with a default password. You can change the network settings according to your network specification. If you would like to give the MFP and Storage...

Page 29 - ” to begin the update.

25 Please note that if the MFP and Storage Server has a set password, you will need to enter it into the password field box. Misc: Allow you to restore the MFP and Storage Server back to factory default. And, the firmware link will allow you to upload the latest firmware on the MFP and Storage Serve...

Page 31 - Troubleshooting; Frequently Asked Questions

28 4 Troubleshooting 4.1 Frequently Asked Questions 1) Why can’t I connect my USB device to my computer through MFP and Storage Server? ¾ Make sure the USB device functions normally when you plug it into your computer via USB cable. ¾ If the USB device, such as USB printer or multi-functional printe...

Page 32 - MY Network Places; and choose; ) Right click the icon that showed below, select; Properties; on the prompt page.

29 Appendix Configuring the PCs In this section, we’ll introduce how to configure the TCP/IP correctly in Windows 2000/XP and Vista. 1. For Windows 2000/XP Users 1) Right click MY Network Places and choose Properties . 2) Right click the icon that showed below, select Properties on the prompt page. ...

TP-Link TL-PS310U - Manual

Table of Contents:

Summary

Other TP-Link Models