TP-Link TL-POE150S - Manual

Page 2 - COPYRIGHT & TRADEMARKS; Specifications are subject to change without notice.

COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form ...

Page 3 - FCC STATEMENT; Reorient or relocate the receiving antenna.

FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses a...

Page 4 - CE Mark Warning

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be require...

Page 5 - CONTENTS; Chapter 1

CONTENTS Package Contents.................................................................... 1 Chapter 1 Introduction .......................................................... 1 1.1 Overview of the Production ......................................... 1 1.2 Features ...................................

Page 6 - Overview of the Production; TL-POE150S PoE Injector

1 Package Contents The following items should be found in your package. ¾ TL-POE150S PoE Injector ¾ One Power Adapter ¾ One Ethernet (CAT5 UTP) Cable ¾ This User Guide ) Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact with ...

Page 7 - Chapter 2; Connect to the PD or PoE Splitter

2 1.2 Features ¾ Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3af standards ¾ Compatible with PoE compliant PDs and PoE Splitters ¾ Transmits electrical power along with data in one single cable ¾ External 48V DC power supply ¾ Supports Plug-and-Play for the devices, without any configuration ¾ E...

Page 8 - LAN IN

3 Chapter 3 Connecting the PoE Injector You can use TL-POE150S PoE Injector with PD or PoE Splitter to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc. The following steps will tell you how to connect the PoE I...

Page 9 - If the device does not support PoE, it is necessary to have a

4 Scheme 1 2. If the device does not support PoE, it is necessary to have a PoE Splitter to separate the power and data, transmitting them detached in one UTP cable and one power cable. Here we take TP-LINK TL-POE10R Splitter for example. You can use following topology. Scheme 2

Page 10 - Appendix: Specifications; Normal

5 ) Note: ¾ Do not mistake the power port of the TL-POE150S and TL-POE10R when choosing the Scheme 2, or else it will cause serious damage to your network device. ¾ If you want to know more details about TL-POE10R Splitter, please refer to “TL-POE10R User Guide” on our website http://www.tp-link.com...

TP-Link TL-POE150S - Manual

Table of Contents:

Summary

Other TP-Link Models