TP-Link d9 - Manuals

Safety Information  When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source.  Don’t disassemble the product, or make r...

TP-LINK TECHNOLOGIES CO., LTD DE CLA R AT ION OF CONFOR M IT Y For the following equipment: Product Description: AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router Model No.: Arche r D9 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical re...

CONTENTS Package Contents ................................................................................................................ 1 Chapter 1. Product Overview ............................................................................................ 2 1.1 Overview of the Modem Router ......

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Package Contents The following contents should be found in your package:  One Archer D9 AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router  One Power Adapter for Archer D9 AC1900 Wireless Dual Band Gigabit ADSL2+ M...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Chapter 1. Product Overview Thank you for choosing the Arche r D9 AC1900 Wire less Dual Band Gigabit ADSL2+ M ode m Route r . 1.1 Overview of the Modem Router The Archer D9 AC1900 Wireless Dual Band Gigabit ADSL2+ Modem...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide (Internet) On The network is available with a successful Internet connection. Off There is no successful Internet connection or the modem router is operating in Bridge mode. Please refer to Note 2 for troubleshooting. (...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide 1.3.2 The Back Panel Figure 1-2 The following parts are located on the rear panel (View from left to right).  ADSL : Through the port, you can connect the telephone to the modem router. Or you can connect them by an ex...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Method one : With the modem router powered on, use a pin to press and hold the RESET button for at least 8-10 seconds. And the modem router will reboot to its factory default settings. Method two : Restore the default s...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Chapter 2. Connecting the Modem Router 2.1 System Requirements  Broadband Internet Access Service (DSL/Cable/Ethernet).  PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors.  TCP/IP protoco...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Chapter 3. Quick Installation Guide This chapter will show you ho w to configure the basic functions of your Archer D9 AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router using Quick Se tup Wizard within minutes. 3.1 ...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide The LEDs of LAN port which you link to the device and the LEDs on your PC's adapter should be lit. 2) Is the TCP/IP configuration for your PC corre ct? If the router's IP address is 192.168.1.1, your PC's IP address mus...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Figure 3-7 Step 7. Configure the basic parameters for 2.4GHz wireless network, and then click Ne xt . Figure 3-8 Step 8. Configure the basic parameters for 5GHz wireless network and then click Ne xt . Figure 3-9 Step 9....

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Figure 3-10 Step 10. You will see the Comple te screen below. Click Finish to complete these settings. Figure 3-11 The basic settings for your modem router are completed. Please open the web browser and try to log on to...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Chapter 4. Configuring the Modem Router This chapter will show configuration for the key functions on the Web-based management page. 4.1 Login After your successful login, you will see the twenty-three main menus on the...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide 4.2 Status Choose “ Status ”, you can see the corresponding information about Device Information , DSL , WAN , LAN and Wire le ss . 16

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide 4.3 Quick Setup Please refer to 3.2 Quick Installation Guide . 4.4 Operation Mode Choose “ Operation M ode ”, and you will see the screen as shown in Figure 4-2. Select your desired mode and then click Sav e . Figure 4-...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide 4.5.1 WAN Settings Choose “ Network ”  “ WAN Se ttings ”, and you will see the WAN Port Information Table in the screen similar to Figure 4-3. There are six different configurations for the connection types, which are ...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Figure 4-8 4.5.1.5 IPoA If your ISP provides an IPoA connection, select IPoA option for the Conne ction Type on the screen. 26

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Figure 4-9  IP Addre ss/Subnet Mask: Enter the IP Address and Subnet Mask provided by ISP.  DNS Se rv e r/Secondary DNS Se rv er: Type in your preferred DNS server.  De fault Gate way: Select a WAN Interface from the...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide  Note : After you finish the Internet configuration, please click Sav e to make the settings take effect. 4.5.2 Interface Grouping Choose “ Network ”  “ Interface Grouping ”, you can view all the current groups on thi...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Figure 4-12 Click Sav e to make the entry effective immediately 4.5.3 LAN Settings Choose “ Network ”  “ LAN Se ttings ” menu, and you will see the LAN screen (shown in Figure 4-13). Please configure the parameters for...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide 4.5.5 MAC Clone Choose menu “ Ne twork ”  “ M AC Clone ”, you can configure the MAC address of the WAN Interface as shown below. The WAN Interface List displays the WAN Interfaces you have configured on the section 4.5...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Figure 4-21 This section will guide you to configure a VPN tunnel between two Archer D9s. The topology is as follows.  Note : You could also use other VPN Routers to set VPN tunnels with Archer D9. Archer D9 supports u...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Click Show Advanced Se ttings and then you can configure the Advanced Settings. We re comme nd you le ave the Adv anced Se ttings as de fault v alue. Figure 4-23  Mode : Select M ain Mode to configure the standard nego...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Figure 4-25  Group/ IP Address/ Subne t M ask: Displays group name, IP address and subnet mask. The parameters can be configured on the Interface Grouping page and LAN Settings page.  DHCP Se rver: If enabled, the mod...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide  Note : 1) To use the DHCP server function of the modem router, you must configure all computers on the LAN as "Obtain an IP Address automatically". 2) You have to disable NAT of the WAN connections, or the DHC...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Figure 4-29 To add a v e ndor class: 1. Click the Add Ne w button. Then Figure 4-30 will pop up. 2. Enter parameters for the vendor class. Click the Sav e button. Figure 4-30 To modify or de le te an e xisting e ntry: 1...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide 11g only: Select if all of your wireless clients are 802.11g. 11n only: Select only if all of your wireless clients are 802.11n. 11bg mixe d: Select if you are using both 802.11b and 802.11g wireless clients. 11bgn mixe...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Step 2: The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup process. Step 3: When the WPS LED is on, the client device has successfully connected to the modem router. Step 4: Refer bac...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide • Ke y Type : You can select the WEP key length (64-bit, or 128-bit.) for encryption. "Disabled" means this WEP key entry is invalid. 64-bit: You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Figure 4-41  SSID: Wireless network name. Enter a desired SSID which is case-sensitive and must not exceed 32 characters.  Region: Select your region from the drop-down list. This field specifies the region where the ...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Figure 4-44 Step 2: Enter the PIN number from the client device in the field on the above WPS screen. Then click Conne ct button. Step 3: “ Conne ct succe ssfully ” will appear on the screen of Figure 4-44, which means ...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Figure 4-60 2. Click the Browse button, and then select the Se le ct Volume from the drop-down list. 3. Enter the display name of the share folder in Share Name filed. 4. Click the Apply button to apply the settings. Yo...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide b) Enter the name of the share folder in Share Name field. c) Click the Apply button to apply the configuration. Figure 4-64 Click the Scan now to scan all the share folders immediately. You can also select the Auto-sca...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Syste m Tools –> Manage Control page to be any other value except 80 such as 8080. Otherwise there will be a conflict to disable the virtual server. 4.14.2 Port Triggering Choose menu “ Forwarding ” → “ Port Triggeri...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide  Note : 1. When the trigger connection is released, the corresponding opened ports will be closed. 2. Each rule can only be used by one host on the LAN at a time. The trigger connection of other hosts on the LAN will b...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide  Current UPnP Status: UPnP can be enabled or disabled by clicking the Enable or Disable button. This feature is enabled by default.  Curre nt UPnP Se ttings List: This table displays the current UPnP information. • Ap...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Figure 4-99  WAN Connection: Select a WAN connection from the drop-down list. Only the connected WAN connections can be shown in the drop-down list.  Configuration Type : Select a configuration type for this tunnel. A...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide 4.19 Bandwidth Control Choose menu “ Bandwidth Control ”, and then you can configure the Upstream Band width and Downstream Bandwidth in the next screen. The values you configure should be less than 1000000Kbps. For opt...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide 2) When upgrade the modem router's firmware, you may lose its current configurations, so please write down some of your customized settings before upgrading the firmware. 3) Do not turn off the modem router or press the...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Ope ration Re se t Reset the value of the entry to zero. De le te Delete the existing entry in the table. 4.24 Logout Choose “ Logout ”, and you will back to the login screen as shown in Figure 4-119. Figure 4-119 109

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Appendix A: Specifications Ge ne ral Standards and Protocols ANSI T1.413, ITU G.992.1, ITU G.992.3, ITU G.992.5, IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, IEEE 802.3, IEEE 802.3u, IEEE802.3a...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Appendix B: Troubleshooting T1. How do I restore my modem router’s configuration to its factory default settings? With the modem router powered on, press and hold the RESET button on the side panel for 8 to 10 seconds b...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Now, try to log on to the Web-based configuration page again after the above settings have been configured. If you still cannot access the configuration page, please restore your modem router’s factory default settings ...

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Appendix C: Technical Support Technical Support  For m ore troubles hooting help, go to: http://www.tp-link.com/en/support/faq  To download the lates t Firm ware, Driver, Utility and Us er Guide, go to: http://www.tp-...