Timex W236 - Manuals - manualsarea.com

Page 3 - Congratulations on purchasing your TIMEX

TIMEX ® WATCHES Congratulations on purchasing your TIMEX ® watch. Please read these instructions carefully to understand how to operate your Timex timepiece.Your watch may not have all of the features described in this booklet. For more information, and to register your product please visit: www.tim...

Page 5 - Water-Resistance Depth

WATER AND SHOCK RESISTANCE If your watch is water-resistant, meter marking (WR_M) is indicated. *pounds per square inch absolute WARNING: TO MAINTAIN WATER-RESISTANCE,DO NOT PRESS ANY BUTTONS OR PULL OUT THE CROWN UNDER WATER UNLESS YOURWATCH IS INDICATED AS 200 METER WATER-RESISTANT. 1. Watch is wa...

Page 6 - DATE MODELS; E N G L I S H

DATE MODELS TO SET TIME: 1) PULL crown all the way out and turn to correct time. 2) Push crown in to restart. For screw-in setting crown, push crown in while turning CLOCKWISE to tighten. Watches with date: Note correct time of day (A.M or P.M.) for proper date function. TO SET DAY: 1) PULL crown to...

Page 7 - TO SET QUICK DATE

DAY/DATE/AM/PM/SUN/MOON MODELS TO SET TIME: 1) PULL out crown to “C” position.2) TURN crown clockwise to correct time. Day/am/pm/moon will also change. 3) Push in crown to “A” position. NOTE: Remember to set time for am or pm (sun or moon.) 7 E N G L I S H TO SET QUICK DATE ® FEATURE: 3-Position Cro...

Page 8 - PERPETUAL CALENDAR; TO SET TIME

PERPETUAL CALENDAR Your Perpetual Calendar watch accurately keeps track of how many days are in each month. It also adjusts for leap years. The date on your watch (including the month and year) was preset at the fac- tory to Eastern Standard Time, Greenwich Mean Time or Hong Kong Standard Time (depe...

Page 9 - BASIC OPERATIONS; • 2 o’clock eye shows “1/20 seconds elapsed” for; turned, date display will change temporarily, but date

CHRONOGRAPH WITH INDIGLO ® NIGHT-LIGHT THIS CHRONOGRAPH HAS TWO FUNCTIONS:TIME & STOPWATCH BASIC OPERATIONS • 6 o’clock eye shows seconds.• 10 o’clock eye shows “minutes elapsed” for chronograph. • 2 o’clock eye shows “1/20 seconds elapsed” for chronograph. 11 E N G L I S H for setting day or da...

Page 10 - TO ADJUST TO A NEW TIME ZONE:

3. PUSH crown in to “A” position. NOTE: The date changes automatically every 24 hours. CHRONOGRAPHTHE CHRONOGRAPH IS CAPABLE OFMEASURING: • 1/20 seconds elapsed up to 1 second (2 o’clock eye). • Seconds elapsed up to 1 minute (chronograph second hand). • Minutes elapsed up to 30 minutes (10 o’clock ...

Page 11 - BEFORE USING THE CHRONOGRAPH,; TO ADJUST CHRONOGRAPH HANDS:

STANDARD CHRONOGRAPH MEASUREMENT: 1. PRESS pusher “A” to start timing.2. PRESS pusher “A” to stop timing.3. PRESS pusher “B” to reset. SPLIT TIME MEASUREMENT: 1. PRESS pusher “A” to start timing.2. PRESS pusher “B” to split.3. PRESS pusher “B” to resume timing.4. PRESS pusher “A” to stop timing.5. P...

Page 12 - CHRONOGRAPH; DISPLAYS AND BUTTONS; FEATURE

CHRONOGRAPH DISPLAYS AND BUTTONS SETTING THE TIME 1) PULL the crown out to the 2nd position “C”.2) Turn the crown to set hour and minute hands.3) When the crown is pushed back to the normal position “A”, small second hand begins to run. 17 E N G L I S H NIGHT-MODE ® FEATURE TO USE NIGHT-MODE ® FEATU...

Page 13 - SETTING THE DATE; TIME MEASUREMENT

minute hand, and chronograph hour hand return to zero position. CHRONOGRAPH RESET (INCL. AFTERREPLACING BATTERY) This procedure should be performed when the chronograph second hand does not return to zero position after the chronograph has been reset, and including after the battery has been replace...

Page 14 - TACHYMETER FUNCTION

TACHYMETER FUNCTION The tachymeter will only determine speeds greater than 60 units per hour using this method; slower speeds can be measured by decreasing the unit of measurement. The function performed by a tachymeter is independent of the unit of distance (e.g. statute miles, nautical miles, kilo...

Page 15 - SLIDING CLASP BRACELET

FOLDOVER CLASPBRACELET 1. Find spring bar that con- nects bracelet to clasp. 2. Using a pointed tool, push in spring bar and gently twist bracelet to disen- gage. 3. Determine wrist size, then insert spring bar in correct bottom hole. 4. Push down on spring bar, align with top hole and release to lo...

Page 17 - TIMEX INTERNATIONAL WARRANTY; FOR ALL OTHER MODELS:

TIMEX INTERNATIONAL WARRANTY Your TIMEX ® watch is warranted against manufacturing defects by Timex Group USA, Inc. for a period of ONE YEAR from the original purchase date. Timex and its worldwide affiliates will honor this International Warranty. Please note that Timex may, at its option, repair y...