TANDBERG 1500MXP - Manuals
TANDBERG 1500MXP – Manual in PDF format online.
Manuals:
Manual TANDBERG 1500MXP
Summary
ii Table Of Contents User Manual ........................................................................................................................... 1 Trademarks and Copyright .................................................................................................... 1 Environmental...
1 Trademarks and Copyright All rights reserved. This document contains information that is proprietary to TANDBERG. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, electronically, mechanically, by photocopying, or otherwise, ...
TANDBERG 1500 MXP 2 Environmental Issues Thank you for buying a product, which contributes to a reduction in pollution, and thereby helps save the environment. Our products reduce the need for travel and transport and thereby reduce pollution. Our products have either none or few consumable parts (c...
User Manual 3 Operator Safety Summary For your protection, please read these safety instructions completely before operating the equipment and keep this manual for future reference. The information in this summary is intended for operators. Carefully observe all warnings, precautions and instruction...
5 1 Introduction The TANDBERG 1500 MXP system offers superior audio and video quality in a fully featured unit. MXP stands for Media Experience and indicates the new TANDBERG platform. Main Features: Supports videoconferencing via both IP and ISDN networks. Selection of up to 1,1 Mbps call qua...
TANDBERG 1500 MXP 8 1.2 Menu Structure The menu structure is divided in two. The Main Menu is available for all users and contains all functionality of the system. The Administrator Menu contains all the settings of the system. Enter Administrator Settings from Main Menu - Control Panel. Making chan...
10 2 Installation Precautions: Never install communication wiring during a lightning storm. Never install jacks for communication cables in wet locations unless the jack is specifically designed for wet locations. Never touch uninstalled communication wires or terminals unless the telephone...
TANDBERG 1500 MXP 12 2.2 Connecting Cables Connect the cables according to the figure below:
2 Installation 13 2.3 Monitor Configuration Before you start using the system, make sure that your monitor uses your desired language. Also, make sure that surround sound is OFF. How to change the monitor language: 1. Press the menu key on the monitor to bring up the monitor menu. The menu key is th...
TANDBERG 1500 MXP 14 2.4 System Configuration The system must be configured for each installation. Configuration settings can be made via the system menu. Navigate through the menu system using the arrow keys and OK. Remember to press the Save button on the bottom of each menu to save your changes. ...
16 3 General Use Wake up the system When the system is not in use, it is in standby mode and the screen is black. Wake up the system by picking up the remote control. An incoming call or pressing any key on the remote will also wake up the system. If the system does not respond: Make sure that th...
3 General Use 17 3.1 The Welcome Screen When the system is switched on, you will see the welcome screen. The welcome screen presents the Main Menu and displays your Main Camera image in the background (Main Camera is system default). Your dial in numbers and system name are displayed in the upper ri...
TANDBERG 1500 MXP 18 3.2 Using the Remote Control The system is controlled with a remote control. Think of the remote control as a mobile phone with number keys and call keys. Use the arrow keys and OK to navigate the menu. The system ’ s most commonly used functions are also accessible directly fro...
TANDBERG 1500 MXP 24 3.3 On Screen Indicators The system has a number of icons signaling different settings: Microphone Off This indicator is shown when the microphone is turned off. Press the Mic off button again to turn the microphone back on. Volume Off This indicator is shown when the volume is ...
3 General Use 25 3.4 Using the Menu Main menu. The menu is the Interface you will use to control the system. The main menu contains: Make a Call, Standby, Phone Book, Presentation, MultiSite Services and Control Panel. When you are in a call, Add another Call and End Call will be available via the g...
3 General Use 31 3.6 Answer an incoming Call You can receive calls anytime, even when the system is in standby mode. But remember to switch the system on using the On/Off switch located at the rear of the system as described in chapter 3 General Use. How to answer an incoming call: 1. To accept an i...
3 General Use 47 3.12 MultiSite Services A Multipoint Control Unit (MCU) enables several sites to participate in the same conference. In TANDBERG's embedded MCU, MultiSite, you can have a maximum of 4video- and 3 telephone-participants including yourself (the host). The participants are tiled up on ...
TANDBERG 1500 MXP 48 Chair Control If you take Chair control, you get the following services: Release Chair Assign Floor To Participant/Release Floor From Participant Disconnect Participant Terminate Meeting Using an external MCU that does not support Chair Control With an external MC...
4 Administrator Settings 59 4.1 General Settings When installing the system, go through the General Settings menu to ensure that you have the right settings for your system, see chapter 2.4 System Configuration . General Settings contain: Language System Name Autoanswer Max Call Length ...
4 Administrator Settings 71 4.3 Presentation Settings Presentation Settings contain: Presentation Start H.239 Call Video Source Presentation Source Snapshot Source Auto-Display Snapshot PIP Appearance PIP Placing VNC Settings 4.3.1 Presentation Start If your system has Duo...
4 Administrator Settings 89 4.8 Network The network menu contain: ISDN-BRI Settings LAN Settings Network Profiles Data Port 4.8.1 ISDN-BRI Settings To make sure your system will work properly using ISDN-BRI, make the following settings: 1. Set ISDN switch type 2. Enter ISDN line numbers ...
TANDBERG 1500 MXP 90 Example: Numbers SPIDS ISDN BRI 1: 67838498 67838498 016783849800 016783849810 ISDN BRI 2: 23478060 23478070 012347806000 012347807000 ISDN BRI 3: 23478420 23478430 012347842000 012347843000 ISDN BRI 4: 23478520 23478530 012347852000 012347853000 4.8.1.3 Advanced ISDN Settings S...
TANDBERG 1500 MXP 92 Ethernet Speed Auto The codec will auto-detect the speed/duplex on the LAN. 10/Half The codec will connect to the LAN using 10Mbps speed/Half Duplex. 10/Full 10 Mbps speed/Full Duplex. 100/Half 100 Mbps speed/Half Duplex. 100/Full 100 Mbps speed/Full Duplex. IP Access Password B...
4 Administrator Settings 93 use a gatekeeper for making H.323 calls and hence an IP-address must be specified manually. Manual The system will use a specific gatekeeper identified by Gatekeeper IP-address. 4.8.2.2.4 Gatekeeper IP This is the gatekeeper IP-address that is used if you specify H.323 Ca...
106 5 Peripheral Equipment Using the optional peripheral devices outlined in this chapter and the many others available, you will be able to build your own applications for use with the system, thereby better integrating the system into your business environment. This chapter will explain how to con...
TANDBERG 1500 MXP 108 5.2 Document Camera A document camera can be used for showing text, diagrams and a variety of graphical material as well as small three-dimensional objects. How to use a document camera with your system: 1. Connect the document camera to the Doc Cam input on the system. 2. Open...
5 Peripheral Equipment 111 5.5 Additional Cameras Extra fixed Cameras You can connect extra fixed cameras to your system, for example, a whiteboard camera. Connect the video output of the additional camera to one of the available Video inputs on the system.
TANDBERG 1500 MXP 112 5.6 Additional Microphones (not for TANDBERG 1500 MXP) If your environment is such that you require more than one microphone for your room, e.g. you have a whiteboard at a distance from your table microphone; it is possible to connect additional microphones to your system. See ...
5 Peripheral Equipment 115 5.9 XGA Monitors and Projectors (Optional) The system can be delivered with optional single or dual TV/XGA monitors. It can also be connected to any DVI/VGA/PAL or NTSC display. Note that the unit supports VESA Display Power Management on the DVI/VGA output (see chapter 5....
TANDBERG 1500 MXP 116 5.10 Stereo Speaker Kit (not for TANDBERG 1500 MXP and 2000 MXP) The Stereo Speaker Kit provides an pair of floor-standing loudspeakers in addition to the built-in DNAM . Using these speakers will enable stereo functionality in your system and thereby enhance the sound experien...
119 6 Appendices Appendices: Appendix 1: Technical Specification Appendix 2: Bandwidth Information Appendix 3: Environmental considerations Appendix 4: Guidelines for setting up videoconferencing rooms Appendix 5: Security Appendix 6: Connecting the system to PRI/T1 Appendix 7: ...
TANDBERG 1500 MXP 120 6.1 Appendix 1 Technical Specification Contanct your TANDBERG representative for a Technical Specification for TANDBERG 1500 MXP or download from www.tandberg.net .
6 Appendix 121 6.2 Appendix 2 Bandwidth Information for TANDBERG endpoints Model 8000MXP, 7000MXP 6000MXP, Maestro Bandwidth Point to point ISDN / IP Standard: 1920 / 4096 Standard: 768 / 3072 Option: 1920 / 4096 MultiSite Total: 6144kbps6x1152 video + 5 audio5x1536 video + no audio4x1920 video + 5 ...
6 Appendix 123 6.3 Appendix 3 Environmental considerations This section explains how to carry out basic adjustments and simple tests to ensure that you send and receive the best possible image and audio quality when using your system. Iris control and lighting By default the system camera will use a...
TANDBERG 1500 MXP 126 6.5 Appendix 5 Security The system has several features both to protect from unauthorized use and system access: Access Code: When Access Code is enabled, the user will be asked to enter an access code before he/she is able to make a call. The system will verify if the entered ...
TANDBERG 1500 MXP 130 6.7 Appendix 7 Using the file system It is possible to access a file system within the TANDBERG system by using ftp: DOS-window: ftp <IP-address of system>, or Web-browser: ftp:// <IP-address of system> Description of the different files: all.prm all settings in the...
6 Appendix 133 6.10 Appendix 10 (Not for set top systems) Pinouts and Connectors WAVE II Camera: 8-PIN RJ (shielded modular jack): This connector is used for the power and control signals to the main camera. Pin-8 +12V (presence when connected in daisy chain) Pin-7 GND Pin-6 GND Pin-5 RXD (in) Pin-4...
6 Appendix 135 6.11 Appendix 11 Cisco CallManager registration Configuring an H.323 client on the CallManager 4.0 The registration of a H.323 client in CallManager is supported on the CallManager (CCM) 4.0 software and forward. 1. To configure the CallManager with an H.323 client, log on to the admi...
TANDBERG 1500 MXP 136 6.12 Appendix 12 Diagnostic Tools for IP To use these tools, will require using a PC and setting up a telnet session towards the system. Q.931 To show Q.931 trace during a call you need to issue the command ‘ syslog on ’ .One can get traces for RAS, Q.931 and H.245 with this co...
TANDBERG 1500 MXP 138 6.13 Appendix 13 Declaration of Conformity Contact your TANDBERG representative for a Declaration of Conformity.
139 Index A Access Code...........................................61 Add Another Call.....................................27 Additional microphone ..........................111 Administrator Password ..........................70 Alert Tones and Volume .........................82 Allowance .............
141 Glossary # 199 AV1: External input for the TANDBERG/LOEWE monitor. 2nd monitor: The second monitor of your videoconferencing system. The second monitor is normally placed on the right side of the first monitor. 4CIF: 4 times CIF, 704x576 pixels 4SIF: 4 times SIF, 704x480 pixels A AACLD: Advanced...
TANDBERG Manuals
-
TANDBERG 7000
Manual
-
TANDBERG EX90
Manual
-
TANDBERG E5740
Manual
-
TANDBERG D11624
Manual
-
TANDBERG MXP
Manual
-
TANDBERG Intern MXP
Manual
-
TANDBERG D13922.06
Manual
-
TANDBERG 2000MXP
Manual
-
TANDBERG 880 MXP
Manual
-
TANDBERG MSE 8510
Manual
-
TANDBERG D14306.01
Manual
-
TANDBERG Utility
Manual
-
TANDBERG 6000 MXP
Manual
-
TANDBERG D1440902
Manual
-
TANDBERG D13751.01
Manual
-
TANDBERG D12809
Manual
-
TANDBERG D1392602
Manual
-
TANDBERG MPS 200
Manual
-
TANDBERG TC2.1
Manual
-
TANDBERG F1 D13353.02
Manual