Suunto VYTEC DS - Manuals

10 1.1.2. Dive Computer Limitations While the dive computer is based on current decompression research and technology, you must realize that the computer cannot monitor the actual physiological functions of an individual diver. All decompression schedules currently known to the authors, including th...

11 The timekeeping display is the default display of the instrument (Fig. 2.1.). If a button is not pressed within 5 minutes, the dive com puter beeps and returns to the timekeeping display automatically (except in Diving and Simula-tion modes). The timekeeping display shuts off after two hours, but...

13 2.4. WIRELESS CYLINDER PRESSURE TRANSMISSION The Vytec can be used together with an optional wireless cylinder pressure transmitter that can easily be attached to the high-pres-sure port of the regulator (Fig. 2.5). By using the transmitter the diver can bene fi t from cylin- der pressure and rem...

14 2.4.2. Pairing and Code Selection In order to receive wireless data the transmitter and the Vytec wrist unit need to be paired. During the pairing procedure the transmitter and wrist unit select a common transmission code. The transmitter turns on when the pressure exceeds 15bar [218 psi] and it ...

15 The selected transmission code can later be veri fi ed via the alternative display, by pressing the “TIME” button twice. If needed, the stored code can be manually erased in this display by pressing the “PLAN” (up) button and then pressing “MODE” (select). The Vytec will now erase the stored code...

17 QUIT 3. DIVING WITH THE VYTEC This section contains instructions on how to operate the dive computer and interpret its displays. You will fi nd that this dive computer is easy to use and read. Each display shows only the data relevant to that speci fi c diving situation. 3.1. BEFORE DIVING 3.1.1....

20 If the battery symbol is displayed in the Surface mode or if the display is faded or weak, the battery may be too low to operate the dive computer and battery replacement is recommended. NOTE! For safety reasons the backlight cannot be activated when the low battery warning is indicated by the ba...

21 The surface interval must be at least 5 minutes for a dive to be considered a repetitive dive. Otherwise, it is considered a continuation of the same dive. The dive number will not change and the dive time will continue, where it left off (see also section 3.6.2. “Dive Numbering”). 3.1.4. User De...

24 • the Personal Adjustment setting on the left side of the center window with a diver symbol and + signs (P0, P1, or P2) (see Table 3.5.) • the Diver Attention Symbol if attenuated RGBM has been set (see Table 3.3.) • blinking Diver Attention Symbol if surface interval should be prolonged (see Tab...

27 3.3.6. Safety Stops and Deep Stops If Deep Stops are not used a 3 minute Recom-mended Safety Stop is prompted after every dive to 10m depth ( fi g. 3.11). Continuous ascent rate violations will result in Mandatory Safety Stops ( fi g. 3.14). When enabled, Deep stops are calculated. The length of ...

28 plus • the time needed to reach the surface after the ceiling and safety stops have been completed. WARNING! YOUR ACTUAL ASCENT TIME MAY BE LONGER THAN DISPLAYED BY THE INSTRUMENT! The ascent time will increase if you: • remain at depth • ascend slower than 10 m/min [33 ft/min] or • make your dec...

29 lift you above the ceiling. Suunto recommends that decompression takes place deeper than 4 m [13 ft], even if the indicated ceiling is shallower. NOTE! It will take more time and more air to decompress below the ceil- ing than at the ceiling. WARNING! NEVER ASCEND ABOVE THE CEILING! You must not ...

30 DISPLAY ABOVE THE CEILING If you ascend above the ceiling during a de-compression stop, a downward pointing arrow will appear and a continuous beeping starts (Fig. 3.19.). In addition, an error warning Er reminds you that you have only three minutes to correct the situation. You must immediately ...

31 on Nitrox use result in longer no-decompression times and shallower maximum depths than div-ing with air. As a safety precaution the oxygen calculations in the computer are made with an oxygen per-centage of 1% + setO 2 % . When the dive computer is set in Nitrox mode the Dive Planning and Dive S...

33 After fi ve seconds the display will automatically revert to the original display. 3.4.3. Oxygen Limit Fraction (OLF) In addition to tracking the diver’s exposure to nitrogen, the instrument tracks the exposure to oxygen, if set to Nitrox mode. These calculations are treated as entirely separate ...

39 You are able to preset alarms before the actual dive. The user program-mable alarms can be set for maximum depth, dive time and time. The alarms activate when: • The preset maximum depth is reached • continuous beep series for 24 seconds or until any button is pressed. • the maximum depth blinks ...

40 3.8. HIGH ALTITUDE DIVES AND PERSONAL ADJUSTMENT The dive computer can be adjusted both for diving at altitude and also to increase the conservatism of the mathematical nitrogen model. 3.8.1. Altitude Adjustment When programming the instrument for the correct altitude, you need to select the corr...

42 mode (RGB50). See Table 3.6. To advise the diver that attenuated RGBM has been set, the Diver Attention Symbol is constantly displayed (Table 3.3.) TABLE 3.6. RGBM MODEL SETTINGS 3.9. ERROR CONDITIONS The dive computer has warning indicators that alert the user to react to certain situations that...

44 EXIT / QUIT! By pressing the SMART button for more than 1 second, any menu based function or submode can be quit and the dive computer will return directly to the Dive Mode. THE LIST OF THE MENU BASED MODES 1. MEMORIES AND DATA TRANSFER [1 MEMORY] 1. Logbook and Dive Pro fi le Memory [1 LOGBOOK] ...

45 4.1. MEMORIES AND DATA TRANSFER [1 MEMORY] The memory options (Fig. 4.5.) for this dive computer include the combined Logbook and Dive Pro fi le Memory (Fig. 4.6. – 4.12.), Dive History Memory (Fig. 4.13. – 4.14.) and the Data Transfer and PC-Interface functions (Fig. 4.15.). The dive entry time ...

46 When Select is displayed next to the mode but-ton the scroll buttons will scroll through the four pages of the selected dive.The END text is displayed between the oldest and most recent dive. (Fig. 4.12.)Note that chronological sequence in the log-book is determined by the date, not by the dive n...

56 NOTE! When the backlight turned OFF, it does not illuminate when an alarm is given. 4.3.3.2. Dive Computer Units Setting [2 UNITS] To enter the Dive Computer Units Setting mode, select MODE- 3 SET- 3 SET PREF- 2 UNITS. This will enable you to choose between metric and imperial units (Fig. 4.34.)....

57 5. CARE AND MAINTENANCE This SUUNTO dive computer is a sophisticated precision instrument. Though designed to withstand the rigors of scuba diving you must treat it with proper care and caution as any other precision instrument. 5.1. IMPORTANT INFORMATION WATER CONTACTS AND PUSH BUTTONS Contamina...

59 computer, there is a leak. A leak must be corrected without delay, as mois-ture will seriously damage the unit, even beyond repair. SUUNTO does not take any responsibility for damage caused by moisture in the dive computer, if the instructions of this manual are not carefully followed. In case of...

60 TOOLS REQUIRED • A fl at 1.5 mm screwdriver or a special tool for spring bars (K5857). • Soft cloth for cleaning. • Needlenose pliers or large screwdriver for turning securing ring. BATTERY REPLACEMENT The battery and the buzzer are located in the back of the instrument in a separate compartment,...

62 • Assemble the shorter part of the strap. Use the spring bar tool or small screwdriver to compress the spring bars. Make sure that the spring bars get fully seated so they will not come off their holes. Console model: • Re fi t the dive computer in the console according the instructions of the co...

64 NOTE! It is imperative to wait at least 30 seconds before re-installing the transmitter battery. When the battery is re-installed the transmitter sends an overpressure (“---“) signal on code 12 for 10 seconds, after which it goes to normal operation, and shuts down after 5min. 9. Check that the n...

65 TABLE 6.1. NO-DECOMPRESSION TIME LIMITS (MIN) FOR VARI-OUS DEPTHS (M) FOR THE FIRST DIVE OF A SERIES TABLE 6.2. NO-DECOMPRESSION TIME LIMITS (MIN) FOR VARI-OUS DEPTHS [FT] FOR THE FIRST DIVE OF A SERIES ALTITUDE DIVING The atmospheric pressure is lower at high altitudes than at sea level. After t...

66 Before high altitude diving, the instrument must be set to the Altitude Adjustment mode to adjust the calculations for the new altitude. The maximum partial pressures of nitrogen allowed by the mathematical model of the dive computer are reduced according to the lower ambient pressure. As a resul...

69 Other displays: • Dive time: 0 to 999 min, counting starts and stops at 1.2 m [4 ft] depth. • Surface time: 0 to 99 h 59 min. • Dive counter: 0 to 99 for repetitive dives. • No-decompression time: 0 to 199 min (- - after 199). • Ascent time: 0 to 99 min (- - after 99). • Ceiling depths: 3.0 to 10...

70 and dive violations. The “M” values are tracked up to 100 hours after a dive. • The EAN and oxygen exposure calculations are based on recommendations by R.W. Hamilton, PhD and currently accepted exposure time limit tables and principles. Battery Vytec: • One 3 V lithium battery: CR 2450 (K5597) a...

73 8.2. SUUNTOSPORTS.COM SECTIONS SuuntoSports.com includes three sections with several functions. The following paragraphs describe only the basic functions of SuuntoSports.com. You can fi nd detailed descriptions of all the site functions and ac- tivities and step-by-step instructions for using th...

74 All groups have a home page that displays information about group events and includes news, noticeboard and other information. Group members can also use group-speci fi c bulletin boards, chat rooms and group calendars, and add links and create group activities. Sport Forums SuuntoSports.com has ...

79 Tissue group Theoretical concept used to model bodily tis-sues for the construction of decompression tables or calculations. Whole-Body Toxicity Another form of oxygen toxicity, which is caused by prolonged exposure to high oxygen partial pressures. The most com-mon symptoms are irritation in the...

80 DISPOSAL OF THE DEVICE Please dispose of the device in an appropriate way, treating it as electronic waste. Do not throw it in the garbage. If you wish, you may return the device to your nearest Suunto dealer.

5 MODEL MENU BASED SUBMODE 1 MENU BASED SUBMODE 2 MODES AND OPERA TIONS MENU BASED MAIN MODE Activate the timekeeping display LCD & battery check nitrox / gauge display Plan ON MODE Backlight (>2 s) 3 SET 1 MEMOR Y 2 SIMUL 3 MODE OPTIONS simulate diving ascend descend Add surface interval hou...

www.suunto.com Made in Finland © Suunto Oy 01 / 2004, 08 / 2005