Stanton VRM-10 - Manuals

INPUTS AND OUTPUTS (Rear) Aside from the headphone output and microphone jacks,all connections are on the rear of the VRM10. A Mains plug with fuse and voltage selector. Changing the fuse: The lid for the housing of both fuses caneasily be opened by pressing both sides of the lid simulta-neously. Af...

U BOOTH The output value of the BOOTH is set at 0dBu. It can beadjusted via the control knob BOOTH (49) NOTE : BOOTH output is not affected by any balance/pansetting (50). V MASTER 2 The output MASTER 2 is identical to MASTER 1. It has anoutput impedance of +6dBu, which can be adjusted by theMASTER ...

MICROPHONE CHANNEL 3 DJ MIC 2 4 DJ MIC 1 Both mic inputs can be used as symmetrical or non- sym-metrical (balanced or non-balanced) channels with eitherXLR or 1/4” jacks, with the provided combo connectors THE XLR jack are set as follows: 1 GND 2 +SIGNAL 3 -SIGNAL THE 1/4” Jacks are set as follows:T...