Stanton RM.416 - Manual

connecting the RM.416 2. connecting the RM.416 Before starting to connect the RM.416, please read the Important Safety Instructions page and study this setup diagram (Figure 2.1). Make sure all faders are at "zero,” the Master Volume is turned all the way counterclockwise, and all devices are Off...

RM.416 Description (Front Panel) 3. RM.416 Description 3.1 Front Panel (Figure 3.1) 3 1. Mic gain (gain): These rotary knobs control the output volume of the Mic channels. 2. Mic eQ: These knobs control the frequency response of MIC 1/2 separately. Range -12 dB to +12 dB. HI: Adjusts the High freque...

RM.416 Description (Front Panel) - continuation 4 12. Zone (Zone): This knob controls the level of the ZONE output located on the Rear Panel (5). The ZONE level is not affected by the MASTER VOLUME and MASTER BALANCE. The ZONE output is essentially a second Master output and can be used to drive a bo...

RM.416 Description (Rear Panel) 5 3.2 Rear Panel (Figure 3.2) 1. Power connector (ac in): While the power is switched OFF, plug the included power cord into the mixer first, and then plug it into the outlet. 2. uSB Port (uSB): After hooking up your computer with the USB 1.1 connections, your computer...

troubleshooting 4. troubleshooting 6 Problem / Symptom Possible cause / Solution no Sound. Is the power ON? Based on your connections, check that youhave properly set the INPUT SELECTOR SWITCH. Make sure thatthe GAIN, CHANNEL FADER, and MASTER VOLUME are turnedup. Make sure the channels are properly...

Specifications Specifications 7 1. geneRal Section: PRODUCT Professional Mixer POWER SOURCE AC 100 - 240V, 50/60 Hz POWER CONSUMPTION 21 W DIMENSIONS (H x W x D) 136.8 mm x 482 mm x 177 mm WEIGHT 4.5 kg 2. inPut/outPut iMPeDance & SenSitiVitY: (EQ FLAT, MAXIMUM GAIN, CUE MIXING CENTER, LOAD=100 k ...

Specifications - continuation 8 9. eQ MIC 1/2 12 +/- 3 dB, -12 +/- 3 dB, at 100 Hz 12 +/- 3 dB, -12 +/- 3 dB, at 1 kHz 12 +/- 3 dB, -12 +/- 3 dB, at 10 kHz MIC 3/CHANNEL 10 +/- 2 dB, below -25 dB at 70 Hz 10 +/-2 dB, below -25 dB at 1 kHz 10 +/-2 dB, below -15 dB at 13 kHz 10. channel Balance Within ...

notes ........................................................................................................................... ........................................................................................................................... .................................................

Registration card thank you for choosing Stanton! Your satisfaction is extremely important to us. We proudly stand behind the quality of our work and appreciate that you put your trust in us.Registering your product will help us guarantee that you are kept up to date on our latest advances. Warranty...

Stanton Warranty Stanton Warranty Through Stanton's authorized dealers around the World, Stanton, or one of Stanton's authorized distributors outside the U.S., will, without charge,repair or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement,...