Stanton VRM-10 - Manual
Stanton VRM-10 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – The XLR’s are set as follows:
- Page 3 – After pressing the VRM10’s power switch, the blue power
- Page 4 – INTERNAL DSP EFFECTS
- Page 6 – DJ FILTER
- Page 7 – TECHNICAL CHARACTERISTICS
- Page 8 – BLOCK DIAGRAM
OWNER’S M A N U A L
VRM-10
Professional Valve DJ mixer
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
INPUTS AND OUTPUTS (Rear) Aside from the headphone output and microphone jacks,all connections are on the rear of the VRM10. A Mains plug with fuse and voltage selector. Changing the fuse: The lid for the housing of both fuses caneasily be opened by pressing both sides of the lid simulta-neously. Af...
U BOOTH The output value of the BOOTH is set at 0dBu. It can beadjusted via the control knob BOOTH (49) NOTE : BOOTH output is not affected by any balance/pansetting (50). V MASTER 2 The output MASTER 2 is identical to MASTER 1. It has anoutput impedance of +6dBu, which can be adjusted by theMASTER ...
MICROPHONE CHANNEL 3 DJ MIC 2 4 DJ MIC 1 Both mic inputs can be used as symmetrical or non- sym-metrical (balanced or non-balanced) channels with eitherXLR or 1/4” jacks, with the provided combo connectors THE XLR jack are set as follows: 1 GND 2 +SIGNAL 3 -SIGNAL THE 1/4” Jacks are set as follows:T...
