Stanton RM-80 - Manual
Stanton RM-80 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PLEASE READ CAREFULLY BEFORE USE OF THIS PRODUCT; Problem; T RO U B LE S H O O T I N G
- Page 3 – D E S C R I P T I O N O F F U N C TI O N S
- Page 4 – FOR THE WA R R A N TY TO BE VA LID, PLEASE CO M PLE TE THE
RM-80
Professional performance mixer
STANTON MAGNETICS, LLC
[email protected]
OWNER’S M A N U A L
F A D E R C L E A N I N G
The RM-80 faders may need lubrication from time to time. This will extend the
fader life and eliminate any potential damage due to extended heavy usage.
Cleaning Instructions
1. Remove the fader and disconnect the cable coming from the mixer. To remove
the crossfader, unsecrew the outer screws (removing the 2 inner screws will
detach the fader from the fader plate). To remove the line faders, remove all 4
screws.
2. Spray a small amount of cleaner or lubricant into both ends of the fader and
slide the fader back and forth a few times to spread the fluid evenly throughout
the fader.
3. Shake and wipe off excess fluid before re-assembling the fader.
F A D E R R E P L A C E M E N T
To replace the cross or channel faders, follow step 1 of the cleaning instructions.
Replacement parts are available from Stanton or your local Stanton dealer.
CF-RM19
Crossfader
LF-RM80
Line input fader
RF-RM80
Line input rotary (dial) fader
PS-RM19US
US Power Supply (110v)
PS-RM19EU
European Power Supply (220v)
PS-RM19UK
UK only Power Supply (240v)
©
2001
, Stanton Magnetics, LLC
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PLEASE READ CAREFULLY BEFORE USE OF THIS PRODUCT FA I LU R E TO FO LLOW T H E I N ST RU C TI O N S P R I N TE D B E LOW M AY VO I D WA R R A N T Y • Follow all security advice printed on your mixer • When removing the unit's AC plug from the power source, grasp and pull the plug, NEVER the cord itse...
D E S C R I P T I O N O F F U N C TI O N S 9. Headphone output : Connection for 1/4 inch headphone. Recommended headphone impedance is 32-200 ohms for maximum volume. 10. Cue pan: Fades the headphone output between the channel(s) selected by the cue assign switches (15) and the master one output, ef...
T E C H N I C A L S P E C I FI C AT I O N S Line inputs: 8 (RCA), 150 mV / 27 K ohm Phono inputs: 4 (RCA), 3 mV / 47 K ohm DJ mic input: 3 (XLR, 1/4“), 2.45 mV / 3 K ohm Master output: 1 (RCA), 1.2 V / 1K ohm Record output: 1 (RCA), 245 mV / 10 K ohm Headphone output: 1 (1/4”), 32 - 200 ohms recomme...
