Smeg SR804SEA4 - Manuals

Smeg SR804SEA4 Hob – User Manual in PDF format online.

Manuals:

User Manual

User Manual Smeg SR804SEA4

Summary

Page 2 - General instructions; INSTRUCTIONS FOR SAFETY AND USE; EEC DIRECTIVES

General instructions 28 1 INSTRUCTIONS FOR SAFETY AND USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE. IT MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE HOB. WE ADVISE YOU TO READ THIS MANUAL AND ALL THE INFORMATION IT CONTAINS CAREFULLY BEFORE USING T...

Page 4 - SAFETY PRECAUTIONS

General instructions 30 2 SAFETY PRECAUTIONS REFER TO THE INSTALLATION INSTRUCTIONS FOR THE SAFETYREGULATIONS FOR ELECTRIC OR GAS APPLIANCES ANDVENTILATION FUNCTIONS. IN YOUR INTERESTS AND FOR YOUR SAFETY THE LAWREQUIRES THAT THE INSTALLATION AND SERVICING OF ALLELECTRICAL APPLIANCES IS CARRIED OUT ...

Page 5 - DO NOT MODIFY THIS APPLIANCE.

General instructions 31 IMMEDIATELY AFTER INSTALLATION, CARRY OUT A QUICK TESTON THE APPLIANCE FOLLOWING THE INSTRUCTIONS PROVIDEDLATER IN THIS MANUAL. SHOULD THE APPLIANCE NOTFUNCTION, DISCONNECT IT FROM THE POWER SUPPLY ANDCALL THE NEAREST TECHNICAL ASSISTANCE CENTRE. NEVERATTEMPT TO REPAIR THE AP...

Page 6 - Instructions for disposal; ENVIRONMENTAL RESPONSIBILITY; Your environmental responsibility

Instructions for disposal 32 3 ENVIRONMENTAL RESPONSIBILITY Our product's packing is made of non-polluting materials, which are therefore compatible with the environment and recyclable. Please help by disposing of the packaging correctly. You can obtain the addresses of collection, recycling and dis...

Page 7 - Instructions for the installer; POSITIONING OF THE HOB; Attachment to support structure; figure 4

Instructions for the installer 33 4 POSITIONING OF THE HOB The following operation requires building and/or carpentry work so must be carried out by a competent tradesman. Installation can be carried out on various materials such as masonry, metal, solid wood or plastic laminated wood as long as the...

Page 9 - ELECTRICAL CONNECTION; The plug on the end of the supply cable and the wall socket must be

Instructions for the installer 35 5 ELECTRICAL CONNECTION Make sure that the voltage and capacity of the power line conform to the data shown on the plate located under the casing. Do not remove this plate for any reason. The plug on the end of the supply cable and the wall socket must be the same t...

Page 10 - GAS CONNECTION; rigid copper

Instructions for the installer 36 6 GAS CONNECTION Connection to the gas mains may be made with a rigid copper pipe or with a flexible pipe and conforming to the provisions defined by standard regulations in force. To facilitate connection, fitting A on the rear of the appliance may be adjusted late...

Page 11 - Connection to LPG; Use a pressure regulator and make the connection to the tank; Ventilation of rooms; Discharge of combustion products may be guaranteed by means of

Instructions for the installer 37 6.1 Connection to LPG Use a pressure regulator and make the connection to the tank according to the provisions of standards regulations in force. Make sure that feed pressure conforms to the levels shown in the table in paragraph “ 0 Regulation for LPG”. 6.2 Ventila...

Page 12 - ADAPTATION TO DIFFERENT TYPES OF GAS; appliance from the electrical socket.; natural gas; Removing the separable control panel

Instructions for the installer 38 7 ADAPTATION TO DIFFERENT TYPES OF GAS Before performing any cleaning or maintenance work, disconnect the appliance from the electrical socket. The hob has been inspected for G20 (2H) natural gas at a pressure of 20 mbar. For functioning with other types of gas the ...

Page 13 - Regulation for LPG

Instructions for the installer 39 7.3 Regulation for LPG Check that the connection has been made as described in the “Gas connection” section. Undo the screw “ D ” and push the air regulator “ C ” fully down. Use a spanner to remove the nozzles “ B ” and fit those of suitable type following the inst...

Page 14 - Regulation for natural gas

Instructions for the installer 40 7.4 Regulation for natural gas The hob has been inspected for G20 (2H) natural gas at a pressure of 20 mbar. To allow the unit to work with this type of gas, perform the same operations described in paragraph “ 0 Regulation for LPG”, but choose the nozzles and regul...

Page 15 - Regulation of primary air; Referred to distance “; 0 cm hobs with separable control panel.

Instructions for the installer 41 7.5 Regulation of primary air Referred to distance “ A ” in mm. 60 cm hobs with separable control panel. Burner G20 20 mbar G30/G31 28/37 mbar Auxiliary (1) 3.0 4.0 Semirapid r (2) 1.0 2.0 Semirapid l (3) 1.0 2.0 Rapid large (4) 1.0 3.5 Ultrarapid (5) 1.0 5.0 90 cm ...

Page 16 - FINAL OPERATIONS; Regulation of minimum for natural gas; Regulation for LPG”.

Instructions for the installer 42 8 FINAL OPERATIONS Having carried out the above adjustments, reassemble the appliance following, backwards, the instructions in paragraph “7.1 Removing the separable control panel / 7.2 Removing the hob”. 8.1 Regulation of minimum for natural gas Reposition the comp...

Page 17 - Arrangement of the burners on the hob; BURNERS

Instructions for the installer 43 8.3 Arrangement of the burners on the hob (Hob with separable control panel) 60 cm. hob BURNERS 1. Auxiliary 2. Semirapid r 3. Semirapid l 4. Rapid large 5. Ultrarapid 90 cm. hob BURNERS 1. Auxiliary 2. Semirapid 3. Rapid 4. Fish burner 5. Ultrarapid

Page 18 - Auxiliary; Lubrication of gas taps; This operation must be done

Instructions for the installer 44 8.4 Arrangement of the burners on the hob (Hob with built-in control panel). 60 cm. hob BURNERS 1. Auxiliary 2. Semirapid r 3. Semirapid l 4. Rapid 5. Ultrarapid 8.5 Lubrication of gas taps With time it may happen that the gas taps get blocked and hard to turn. Clea...

Page 19 - Instructions for the user; USING THE HOB; Ignition of the burners; In models with safety valve, the knob; Practical advice for using the burners; To avoid overcooking or damage to the surface top

Instructions for the user 45 9 USING THE HOB Before turning on the burners, make sure that the burner rings, caps and grids have been fitted correctly. In the ultrarapid burner, notch A must be aligned with pin B . Grid C provided is intended for use with woks (Chinese pans). Adapter D comes only wi...

Page 20 - Diameter of the pans; Electric elements

Instructions for the user 46 while cooking, all pans or griddles must be positioned within the cooking hob perimeter and must be a minimum distance of 3-4 cm from the knobs. 9.3 Diameter of the pans Burners Ø min. and max. (en cm.) Auxiliary 12-14 Semirapid 16-20 Rapid medio 22-26 Rapid large 22-26 ...

Page 21 - WARNING; Using a griddle plate

Instructions for the user 47 or fish. 5 Strong For roasts, steaks and large boiled joints. 6 Very strong To boil large amounts of water, to fry. WARNING When switching on the electric element for the first time, or if the electric element has not been used for a long time, to remove any humidity fro...

Page 22 - CLEANING AND MAINTENANCE; Never use a steam jet to clean the appliance.; Cleaning; Regular daily cleaning of the hob; pour the product on a damp cloth and wipe the surface,; Food stains or residues

Instructions for the user 48 10 CLEANING AND MAINTENANCE Never use a steam jet to clean the appliance. Before any intervention, disconnect the power supply of the device. 10.1 Cleaning Clean the cooking top regularly every time you use it, obviously after it has cooled. 10.1.1 Regular daily cleaning...

Page 23 - Cleaning of cooking hob components; CAUTION: do not wash these components in a dishwasher.; Ignition plugs and safety devices

Instructions for the user 49 10.2 Cleaning of cooking hob components CAUTION: do not wash these components in a dishwasher. In normal use of the hob, the stainless steel burner caps and pan- stands tend to be burnished by the high temperature. Clean these parts using very fine abrasive sponges or si...