Smeg SAI3964B - Manuals

Instructions 7 EN For this appliance • If cracks or fissures form, or if the glass ceramic cooking surface breaks, turn off the appliance immediately. Disconnect the power supply and call Technical Support. • Avoid hard, solid objects falling on the cooking surface. • Do not use the cooktop if the p...

Instructions 8 • In conformity with the provisions regarding electromagnetic compatibility, the electromagnetic induction cooktop comes under group 2 and class B (EN 55011). • This appliance complies with current safety and electromagnetic compatibility standards and legislation. However, people who...

Instructions 9 EN 1.6 Disposal This appliance conforms to the WEEE European directive (2012/19/EU) and must be disposed of separately from other waste at the end of its service life. The appliance does not contain substances in quantities sufficient to be considered hazardous to health and the envir...

Instructions 10 1.7 How to read the user manual This user manual uses the following reading conventions: 1. Sequence of instructions for use.• Standalone instruction. Instructions General information on this user manual, on safety and final disposal. Description Description of the appliance and its ...

Description 11 EN 2 Description 2.1 General Description 60 cm 90 cm SX = Left cooking zones CNT = Centre cooking zones DX = Right cooking zones

Description 12 2.2 Control panel 1 Special functions buttons 2 Timer display 3 Cooking zones display 4 Slider bar 5 On/Off button 6 Auto-Vent 2.0 function button Maximum power draw table * power levels are indicative only and can vary according to the pan used or the settings. Dimensions H x L (mm) ...

Description 13 EN Advantages of induction cooking • Energy saving thanks to the direct transmission of energy to the pan (suitable magnetisable cookware is required) compared to traditional electric cooking. • Improved safety as the energy is only transmitted to the pan placed on the cooktop. • High...

Use 14 3 Use 3.1 Instructions High temperature Danger of burns • Protect your hands wearing heat-proof gloves during use. • Do not touch or clean the cooktop surface during operation or when the residual heat indicator lights are still on. • Do not put empty saucepans or frying pans on switched on c...

Use 15 EN 3.2 Preliminary operations In order to remove any moisture that could have accumulated during the manufacturing process and for the electronic circuits and control keypad to work properly:1. Remove the protective films from the external surfaces of the appliance and accessories. 2. Remove ...

Use 16 Minimum cookware diameters Make sure that the minimum diameter of pans used are as specified in the following table, for both configurations. Bear the following in mind:• Do not exceed the limits of the zones outlined on the cooktop. • Do not cover the control panel.• Do not place pans near t...

Use 17 EN Limiting the cooking duration The cooktop has an automatic device which limits the duration of use. If the cooking zone settings are not changed, the maximum duration of operation of each zone depends on the power level selected.When the device for limiting the duration of use is activated...

Use 18 Power levels The power in the cooking zone can be adjusted to various levels. The table shows the levels suitable for various types of cooking. * see Booster and Double Booster function Switching the cooktop on/off To activate the cooktop, press and hold the On/Off button for at least 1 secon...

Use 19 EN 2. Slide your finger to the right or left along the slider bar to select the power level from to or enable the Booster function (see “Booster Function”). The display for the zone used indicates the set power level. Switching the cooking zone off 1. Slide your finger towards the left until ...

Use 20 After switching on the cooktop and selecting a cooking zone:1. Place a finger on the left of the slider bar. The display of the cooking zone used turns on: the power level indicated is . 2. Slide your finger to the right of the slider bar to select the Booster function. The display of the coo...

Use 21 EN Multizone Function After having switched on the cooktop:1. Place a finger simultaneously on the buttons of two cooking zones one above the other. After a short beep, the symbol will appear next to the button of the rear zone. The Multizone function is now active.2. Set the required cooking...

Use 22 Example of INCORRECT positioning of pans Griddle position examples To deactivate the Multizone function : Simultaneously press the buttons of the cooking zones on which the Multizone function is active. The symbol disappears and the two zones can be regulated separately. Cooking guidelines Th...

Use 23 EN Residual heat If the cooking zone is still hot after being switched off, the symbol will be displayed on the display. The symbol clears once the temperature drops below 60°C. 3.4 Special functions Pause function To activate the Pause function:1. Switch on at least one cooking zone. 2. Keep...

Use 24 To turn the controls lock off: 1. press and hold the button again for at least one second. Grill Function To activate the Grill function:1. Place a griddle or a long pan on the left zones. 2. Press the button, which will start to flash. The symbol will appear on the front zone display and the...

Use 25 EN This function has an automatic and a manual mode:• The default automatic mode adjusts the hood extractor fan speed according to the total power of the appliance (see “User menu” - option U8 ) • Manual mode allows you to adjust the extractor fan speed by pressing the button. After switching...

Use 26 Rapid heating The rapid heating function heats one cooking zone at maximum power for a limited time, after which it continues cooking at the set power level.After selecting a cooking zone:• Press and hold a power level (from 1 to 8 ) for at least 3 seconds. • The symbol will appear on the coo...

Use 27 EN 2. Use the + and - buttons to modify or reset the timer. 3. After 10 seconds, the timer will start the new countdown or will be deactivated. Timed cooking To activate the timed cooking function, after having activated at least one cooking zone:1. Select a power level.2. Touch the area insi...

Use 28 Recall Function If the appliance is switched off unintentionally, carry out the following procedure within 6 seconds:1. Switch on the appliance. • The button will start to flash. 2. Then immediately press the pause button to restore the previously active functions. 3.7 User menu The user menu...

Use 31 EN Option U9 activates or deactivates the Auto-Vent 2.0 function:• 0 : function off. • 1 : function on. Exiting the user menu There are two ways to exit from the user menu: 1. Press . Any modifications will not be saved and the cooktop will be switched off. Or 2. Press and hold the On/Off but...

Cleaning and maintenance 32 4 Cleaning and maintenance 4.1 Instructions 4.2 Cleaning the surfaces To keep the surfaces in good condition, they should be cleaned regularly after use. Let them cool first. 4.3 Ordinary weekly cleaning Clean and maintain the cooktop once a week using an ordinary glass c...

Cleaning and maintenance 33 EN Changes in colour do not affect the operation and stability of the glass. These are not alterations to the material of the cooktop but just residues which have not been removed and have then carbonised. Shiny surfaces can form due to the bases of pans, especially alumi...

Installation 34 5 Installation 5.1 Electrical connection General information Check the grid characteristics against the data indicated on the plate.The identification plate bearing the technical data, serial number and brand name is visibly positioned on the appliance.Do not remove this plate for an...

Installation 35 EN • 220-240 V 1N ~ Five-core 5 x 4 mm² cable Fixed connection Fit the power line with an omnipolar circuit breaker in compliance with installation regulations. The circuit breaker should be located near the appliance and in an easily reachable position. Testing At the end of install...

Installation 36 4. Then press the left half of the slider bar to decrease the power, or the right half to increase it. The Eco-Logic Advance function increases or decreases the power in 0.1 kW steps with each touch.To exit from the user menu: 1. Press and hold for at least 2 seconds to save the modi...

Installation 37 EN Semi-flush mounting Cooktop seal To prevent the leakage of liquid between the frame of the cooktop and the worktop, place the adhesive seal provided along the entire outer edge of the cooktop before assembly. Flush mounting For this kind of cooktops additional milling is needed in...

Installation 38 In the event the cooktop needs to be removed, cut the silicone using a cutter before attempting to remove it (C). 5.6 Mounting Over built-in oven The distance between the cooktop and the kitchen furniture or other installed appliances must be enough to ensure sufficient ventilation a...

Installation 39 EN opens on rear Ventilation The illustrations below show two examples of installations having suitable ventilation and one example of an incorrect installation that should be avoided. Spring clips To ensure the cooktop is fixed and centred as accurately as possible, the clips provid...