Smeg PV364NAU - Manuals - manualsarea.com

Page 3 - Risk of damaging the appliance

PRECAUTIONS - 5 91477A095/B e breaks, turn off the appliance immediately. Disconnect the power supply and call Technical Support. • WARNING: A gas cooking appliance produces heat, humidity and combustion products in the room where it is installed. Make sure there is good ventilation, especially when...

Page 4 - Instructions for using pans; Installation

6 - PRECAUTIONS 91477A095/B • Do not place pans directly on the burners. • Do not put empty pans or frying pans on burners that are lit. • Do not use rough or abrasive materials or sharp metal scrapers. • Do not use cleaning products containing chlorine, ammonia or bleach on parts made of steel or t...

Page 6 - This user manual

8 - PRECAUTIONS 91477A095/B appliance is working correctly (rotation of knobs, positioning of the pan supports etc.) only once it has been installed and secured to the unit. Appliance purpose This appliance is intended for cooking food in the home environment. Every other use is considered inappropr...

Page 7 - How to read the user manual; DESCRIPTION; General description

DESCRIPTION - 9 91477A095/B e How to read the user manual This user manual uses the following reading conventions: DESCRIPTION General description AUX: Auxiliary burnerSR: Semi-rapid burnerR: Rapid burnerUR2: Ultra-rapid burnerA: 60 cm models.B: 72 cm models.C: 90 cm models. Gas cooking zone Front l...

Page 8 - Accessories; USE; Precautions

10 - USE 91477A095/B minimum setting to adjust the flame. Return the knobs to the position to turn off the burners. Accessories • Not all accessories are available on some models. • The accessories intended to come into contact with food are made of materials that comply with the provisions of curre...

Page 9 - Using the hob; CLEANING AND MAINTENANCE; Cleaning the hob

CLEANING AND MAINTENANCE - 11 91477A095/B e they are placed properly. Using the hob All the appliance’s control and monitoring devices are located together on the front panel. The burner controlled by each knob is shown next to the knob. The appliance is equipped with an electronic ignition device. ...

Page 11 - INSTALLATION; Gas connection

INSTALLATION - 13 91477A095/B e The fuses blow or the circuit breaker of the residential electrical system trips repeatedly.• Call Technical Support or an electrician. There are cracks or fissures in the hob:• Turn off the appliance immediately, disconnect the power supply and contact Technical Supp...

Page 13 - Burner and nozzle characteristics tables

INSTALLATION - 15 91477A095/B e spindle (depending on the model) until the correct minimum flame is achieved. 3. Refit the knob and verify that the burner flame is stable. 4. Turn the knob rapidly from the maximum to the minimum setting: The flame should not go out. 5. Repeat the operation on all th...

Page 14 - Section cut from the countertop

16 - INSTALLATION 91477A095/B For the Australian/New Zealand market: The circuit breaker incorporated in the fixed connection must comply with AS/NZS 3000. Section cut from the countertop Safety instructions for positioning and installation • Installation can be carried out on various materials such...

Page 15 - Mounting

INSTALLATION - 17 91477A095/B e In the case of flush mounting, after placing the adhesive seal (A) on the glass surface and after positioning and securing the hob, fill the edges with insulating silicone (B) and wipe off any excess. If for any reason the hob needs to be removed, cut the silicone usi...